Makefile.in (top_builddir): Set to `.'.

2004-12-18  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.in (top_builddir): Set to `.'.
	(OUTPUT_OPTION): Removed.
	(LIBTOOL): New.
	(LTLIBOBJS): New.
	(EXTRA_LTOFILES): New.
	(FLAGS_TO_PASS): Add EXTRA_LTOFILES.
	(all): Remove stamp-picdir.
	(LTCOMPILE): New.
	(.c.lo): New rule.
	(REQUIRED_LTOFILES): New.
	(CONFIGURED_LTOFILES): New.
	($(TARGETLIB)): Check .libs for PIC object files. Depend on
	$(REQUIRED_LTOFILES) $(EXTRA_LTOFILES) $(LTLIBOBJS).
	(stamp-picdir): Completely removed.
	(maint-missing): Pass $(REQUIRED_LTOFILES)
	$(CONFIGURED_LTOFILES) instead of (REQUIRED_OFILES)
	$(CONFIGURED_OFILES)
	(maint-buildall): Depend on $(REQUIRED_LTOFILES)
	$(CONFIGURED_LTOFILES).
	(mostlyclean): Also remove *.lo .libs.
	Run "make maint-deps".

	* aclocal.m4: Include ../libtool.m4.

	* config.table: Don't check --enable-shared.

	* configure.ac (AC_PROG_LIBTOOL): Add.
	(AC_PROG_CC_C_O): Removed.
	(OUTPUT_OPTION): Removed.
	(NO_MINUS_C_MINUS_O): Removed.
	(ltpexecute): New substitute.
	(LIBOBJS): Cleanup.
	* configure: Regenerated.

	* maint-tool: Updated for .lo/libtool.

From-SVN: r92353

libiberty/ChangeLog

+2004-12-18  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* Makefile.in (top_builddir): Set to `.'.
+	(OUTPUT_OPTION): Removed.
+	(LIBTOOL): New.
+	(LTLIBOBJS): New.
+	(EXTRA_LTOFILES): New.
+	(FLAGS_TO_PASS): Add EXTRA_LTOFILES.
+	(all): Remove stamp-picdir.
+	(LTCOMPILE): New.
+	(.c.lo): New rule.
+	(REQUIRED_LTOFILES): New.
+	(CONFIGURED_LTOFILES): New.
+	($(TARGETLIB)): Check .libs for PIC object files. Depend on
+	$(REQUIRED_LTOFILES) $(EXTRA_LTOFILES) $(LTLIBOBJS).
+	(stamp-picdir): Completely removed.
+	(maint-missing): Pass $(REQUIRED_LTOFILES)
+	$(CONFIGURED_LTOFILES) instead of (REQUIRED_OFILES)
+	$(CONFIGURED_OFILES)
+	(maint-buildall): Depend on $(REQUIRED_LTOFILES)
+	$(CONFIGURED_LTOFILES).
+	(mostlyclean): Also remove *.lo .libs.
+	Run "make maint-deps".
+
+	* aclocal.m4: Include ../libtool.m4.
+
+	* config.table: Don't check --enable-shared.
+
+	* configure.ac (AC_PROG_LIBTOOL): Add.
+	(AC_PROG_CC_C_O): Removed.
+	(OUTPUT_OPTION): Removed.
+	(NO_MINUS_C_MINUS_O): Removed.
+	(ltpexecute): New substitute.
+	(LIBOBJS): Cleanup.
+	* configure: Regenerated.
+
+	* maint-tool: Updated for .lo/libtool.
+
 2004-12-11  Ben Elliston  <bje@au.ibm.com>
 
 	* configure.ac: Invoke AC_CHECK_SIZEOF for sizeof (int).

libiberty/Makefile.in

@@ -29,6 +29,8 @@
 libiberty_topdir = @libiberty_topdir@
 srcdir = @srcdir@
 
+top_builddir = .
+
 prefix = @prefix@
 
 exec_prefix = @exec_prefix@
@@ -52,9 +54,6 @@ INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
 mkinstalldirs = $(SHELL) $(libiberty_topdir)/mkinstalldirs
 
-# Some compilers can't handle cc -c blah.c -o foo/blah.o.
-OUTPUT_OPTION = @OUTPUT_OPTION@
-
 AR = @AR@
 AR_FLAGS = rc
 
@@ -64,6 +63,7 @@ LIBCFLAGS = $(CFLAGS)
 RANLIB = @RANLIB@
 MAKEINFO = @MAKEINFO@
 PERL = @PERL@
+LIBTOOL = @LIBTOOL@
 
 PICFLAG =
 
@@ -73,10 +73,12 @@ TARGETLIB = ./libiberty.a
 TESTLIB = ./testlib.a
 
 LIBOBJS = @LIBOBJS@
+LTLIBOBJS = @LTLIBOBJS@
 
 # A configuration can specify extra .o files that should be included,
 # even if they are in libc. (Perhaps the libc version is buggy.)
 EXTRA_OFILES = 
+EXTRA_LTOFILES = 
 
 # Flags to pass to a recursive make.
 FLAGS_TO_PASS = \
@@ -87,6 +89,7 @@ FLAGS_TO_PASS = \
 	"DESTDIR=$(DESTDIR)" \
 	"LIBCFLAGS=$(LIBCFLAGS)" \
 	"EXTRA_OFILES=$(EXTRA_OFILES)" \
+	"EXTRA_LTOFILES=$(EXTRA_LTOFILES)" \
 	"HDEFINES=$(HDEFINES)" \
 	"INSTALL=$(INSTALL)" \
 	"INSTALL_DATA=$(INSTALL_DATA)" \
@@ -105,7 +108,7 @@ FLAGS_TO_PASS = \
 SUBDIRS = testsuite
 
 # FIXME: add @BUILD_INFO@ once we're sure it works for everyone.
-all: stamp-picdir $(TARGETLIB) needed-list required-list all-subdir
+all: $(TARGETLIB) needed-list required-list all-subdir
 	@: $(MAKE) ; exec $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=all
 
 .PHONY: check installcheck
@@ -117,15 +120,19 @@ installcheck: installcheck-subdir
 INCDIR=$(srcdir)/$(MULTISRCTOP)../include
 
 COMPILE.c = $(CC) -c @DEFS@ $(LIBCFLAGS) -I. -I$(INCDIR) $(HDEFINES) @ac_libiberty_warn_cflags@
+LTCOMPILE = $(LIBTOOL) --mode=compile $(COMPILE.c)
 
 # Just to make sure we don't use a built-in rule with VPATH
 .c.o:
 	false
 
+.c.lo:
+	false
+
 # NOTE: If you add new files to the library, add them to this list
-# (alphabetical), and add them to REQUIRED_OFILES, or
-# CONFIGURED_OFILES and funcs in configure.ac.  Also run "make maint-deps"
-# to build the new rules.
+# (alphabetical), and add them to REQUIRED_OFILES/REQUIRED_LTOFILES, or
+# CONFIGURED_OFILES/CONFIGURED_LTOFILES and funcs in configure.ac.
+# Also run "make maint-deps" to build the new rules.
 CFILES = alloca.c argv.c asprintf.c atexit.c				\
 	basename.c bcmp.c bcopy.c bsearch.c bzero.c			\
 	calloc.c choose-temp.c clock.c concat.c cp-demangle.c		\
@@ -173,6 +180,22 @@ REQUIRED_OFILES = ./regex.o ./cplus-dem.o ./cp-demangle.o ./md5.o	\
 	./ternary.o							\
 	./xatexit.o ./xexit.o ./xmalloc.o ./xmemdup.o ./xstrdup.o	\
 	 ./xstrerror.o
+REQUIRED_LTOFILES = ./regex.lo ./cplus-dem.lo ./cp-demangle.lo ./md5.lo	\
+	./alloca.lo ./argv.lo						\
+	./choose-temp.lo ./concat.lo ./cp-demint.lo			\
+	./dyn-string.lo							\
+	./fdmatch.lo ./fibheap.lo ./floatformat.lo ./fnmatch.lo		\
+	./getopt.lo ./getopt1.lo ./getpwd.lo ./getruntime.lo		\
+	./hashtab.lo ./hex.lo						\
+	./lbasename.lo ./lrealpath.lo					\
+	./make-relative-prefix.lo ./make-temp-file.lo			\
+	./objalloc.lo ./obstack.lo					\
+	./partition.lo ./physmem.lo @ltpexecute@				\
+	./safe-ctype.lo ./sort.lo ./spaces.lo ./splay-tree.lo ./strerror.lo	\
+	 ./strsignal.lo							\
+	./ternary.lo							\
+	./xatexit.lo ./xexit.lo ./xmalloc.lo ./xmemdup.lo ./xstrdup.lo	\
+	 ./xstrerror.lo
 
 # These are all the objects that configure may add to the library via
 # $funcs or EXTRA_OFILES.  This list exists here only for "make
@@ -198,6 +221,27 @@ CONFIGURED_OFILES = ./asprintf.o ./atexit.o				\
 	./vasprintf.o ./vfork.o ./vfprintf.o ./vprintf.o ./vsnprintf.o	\
 	 ./vsprintf.o							\
 	./waitpid.o
+CONFIGURED_LTOFILES = ./asprintf.lo ./atexit.lo				\
+	./basename.lo ./bcmp.lo ./bcopy.lo ./bsearch.lo ./bzero.lo		\
+	./calloc.lo ./clock.lo ./copysign.lo				\
+	./_doprnt.lo							\
+	./ffs.lo								\
+	./getcwd.lo ./getpagesize.lo					\
+	./index.lo ./insque.lo						\
+	./memchr.lo ./memcmp.lo ./memcpy.lo ./memmove.lo ./mempcpy.lo	\
+	 ./memset.lo ./mkstemps.lo					\
+	./pex-djgpp.lo ./pex-mpw.lo ./pex-msdos.lo ./pex-os2.lo		\
+	 ./pex-unix.lo ./pex-win32.lo					\
+	 ./putenv.lo							\
+	./random.lo ./rename.lo ./rindex.lo				\
+	./setenv.lo ./sigsetmask.lo ./snprintf.lo ./stpcpy.lo ./stpncpy.lo	\
+	 ./strcasecmp.lo ./strchr.lo ./strdup.lo ./strncasecmp.lo		\
+	 ./strncmp.lo ./strrchr.lo ./strstr.lo				\
+	 ./strtod.lo ./strtol.lo ./strtoul.lo				\
+	./tmpnam.lo							\
+	./vasprintf.lo ./vfork.lo ./vfprintf.lo ./vprintf.lo ./vsnprintf.lo	\
+	 ./vsprintf.lo							\
+	./waitpid.lo
 
 # These files are installed if the library has been configured to do so.
 INSTALLED_HEADERS =                                                     \
@@ -215,20 +259,23 @@ INSTALLED_HEADERS =                                                     \
 	$(INCDIR)/splay-tree.h                                          \
 	$(INCDIR)/ternary.h
 
-$(TARGETLIB): $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS)
-	-rm -f $(TARGETLIB) pic/$(TARGETLIB)
+$(TARGETLIB): $(REQUIRED_LTOFILES) $(EXTRA_LTOFILES) $(LTLIBOBJS)
+	-rm -f $(TARGETLIB) .libs/$(TARGETLIB)
 	$(AR) $(AR_FLAGS) $(TARGETLIB) \
 	  $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS)
 	$(RANLIB) $(TARGETLIB)
-	if [ x"$(PICFLAG)" != x ]; then \
-	  cd pic; \
+	if [ -d .libs ]; then \
+	  cd .libs; \
 	  $(AR) $(AR_FLAGS) $(TARGETLIB) \
 	    $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS); \
 	  $(RANLIB) $(TARGETLIB); \
+	  [ -d ../pic ] || mkdir ../pic; \
+	  rm -f ../pic/$(TARGETLIB); \
+	  cp $(TARGETLIB) ../pic/$(TARGETLIB); \
 	  cd ..; \
 	else true; fi
 
-$(TESTLIB): $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
+$(TESTLIB): $(REQUIRED_LTOFILES) $(CONFIGURED_LTOFILES)
 	-rm -f $(TESTLIB)
 	$(AR) $(AR_FLAGS) $(TESTLIB) \
 	  $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
@@ -320,12 +367,6 @@ needed-list: Makefile
 required-list: Makefile
 	echo $(REQUIRED_OFILES) > required-list
 
-stamp-picdir:
-	if [ x"$(PICFLAG)" != x ] && [ ! -d pic ]; then \
-	  mkdir pic; \
-	else true; fi
-	touch stamp-picdir
-
 .PHONY: all etags tags ls clean stage1 stage2
 
 etags tags: TAGS etags-subdir
@@ -345,9 +386,9 @@ ls:
 # Various targets for maintainers.
 
 maint-missing :
-	@$(PERL) $(srcdir)/maint-tool -s $(srcdir) missing $(CFILES) $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
+	@$(PERL) $(srcdir)/maint-tool -s $(srcdir) missing $(CFILES) $(REQUIRED_LTOFILES) $(CONFIGURED_LTOFILES)
 
-maint-buildall : $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
+maint-buildall : $(REQUIRED_LTOFILES) $(CONFIGURED_LTOFILES)
 	@true
 
 maint-undoc : $(srcdir)/functions.texi
@@ -361,9 +402,9 @@ maint-deps :
 # Cleaning has to be done carefully to ensure that we don't clean our SUBDIRS
 # multiple times, hence our explicit recursion with an empty SUBDIRS.
 mostlyclean: mostlyclean-subdir
-	-rm -rf *.o pic core errs \#* *.E a.out
+	-rm -rf *.o *.lo pic .libs core errs \#* *.E a.out
 	-rm -f needed.awk needed2.awk errors dummy needed-list config.h stamp-*
-	-rm -f $(CONFIG_H) $(NEEDED_LIST) stamp-picdir
+	-rm -f $(CONFIG_H) $(NEEDED_LIST)
 	-rm -f libiberty.aux libiberty.cp libiberty.cps libiberty.fn libiberty.ky
 	-rm -f libiberty.log libiberty.tmp libiberty.tps libiberty.pg
 	-rm -f libiberty.pgs libiberty.toc libiberty.tp libiberty.tpl libiberty.vr
@@ -410,653 +451,353 @@ maintainer-clean-subdir: config.h
 	  cd $$dir && $(MAKE) $(FLAGS_TO_PASS) $$target; \
 	done
 
-$(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS): stamp-picdir
-$(CONFIGURED_OFILES): stamp-picdir
-
+# Don't export variables to the environment, in order to not confuse
+# configure.
+.NOEXPORT:
 # The dependencies in the remainder of this file are automatically
 # generated by "make maint-deps".  Manual edits will be lost.
 
-./_doprnt.o: $(srcdir)/_doprnt.c config.h $(INCDIR)/ansidecl.h \
+./_doprnt.lo: $(srcdir)/_doprnt.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/safe-ctype.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/_doprnt.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/_doprnt.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/_doprnt.c
 
-./alloca.o: $(srcdir)/alloca.c config.h $(INCDIR)/ansidecl.h \
+./alloca.lo: $(srcdir)/alloca.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/alloca.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/alloca.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/alloca.c
 
-./argv.o: $(srcdir)/argv.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/argv.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/argv.c $(OUTPUT_OPTION)
+./argv.lo: $(srcdir)/argv.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/argv.c
 
-./asprintf.o: $(srcdir)/asprintf.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/asprintf.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/asprintf.c $(OUTPUT_OPTION)
+./asprintf.lo: $(srcdir)/asprintf.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/asprintf.c
 
-./atexit.o: $(srcdir)/atexit.c config.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/atexit.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/atexit.c $(OUTPUT_OPTION)
+./atexit.lo: $(srcdir)/atexit.c config.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/atexit.c
 
-./basename.o: $(srcdir)/basename.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+./basename.lo: $(srcdir)/basename.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
 	$(INCDIR)/safe-ctype.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/basename.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/basename.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/basename.c
 
-./bcmp.o: $(srcdir)/bcmp.c
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/bcmp.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/bcmp.c $(OUTPUT_OPTION)
+./bcmp.lo: $(srcdir)/bcmp.c
+	$(LTCOMPILE) -c -o $@ $(srcdir)/bcmp.c
 
-./bcopy.o: $(srcdir)/bcopy.c
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/bcopy.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/bcopy.c $(OUTPUT_OPTION)
+./bcopy.lo: $(srcdir)/bcopy.c
+	$(LTCOMPILE) -c -o $@ $(srcdir)/bcopy.c
 
-./bsearch.o: $(srcdir)/bsearch.c config.h $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/bsearch.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/bsearch.c $(OUTPUT_OPTION)
+./bsearch.lo: $(srcdir)/bsearch.c config.h $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/bsearch.c
 
-./bzero.o: $(srcdir)/bzero.c
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/bzero.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/bzero.c $(OUTPUT_OPTION)
+./bzero.lo: $(srcdir)/bzero.c
+	$(LTCOMPILE) -c -o $@ $(srcdir)/bzero.c
 
-./calloc.o: $(srcdir)/calloc.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/calloc.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/calloc.c $(OUTPUT_OPTION)
+./calloc.lo: $(srcdir)/calloc.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/calloc.c
 
-./choose-temp.o: $(srcdir)/choose-temp.c config.h $(INCDIR)/ansidecl.h \
+./choose-temp.lo: $(srcdir)/choose-temp.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/choose-temp.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/choose-temp.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/choose-temp.c
 
-./clock.o: $(srcdir)/clock.c config.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/clock.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/clock.c $(OUTPUT_OPTION)
+./clock.lo: $(srcdir)/clock.c config.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/clock.c
 
-./concat.o: $(srcdir)/concat.c config.h $(INCDIR)/ansidecl.h \
+./concat.lo: $(srcdir)/concat.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/concat.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/concat.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/concat.c
 
-./copysign.o: $(srcdir)/copysign.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/copysign.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/copysign.c $(OUTPUT_OPTION)
+./copysign.lo: $(srcdir)/copysign.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/copysign.c
 
-./cp-demangle.o: $(srcdir)/cp-demangle.c config.h $(INCDIR)/ansidecl.h \
+./cp-demangle.lo: $(srcdir)/cp-demangle.c config.h $(INCDIR)/ansidecl.h \
 	$(srcdir)/cp-demangle.h $(INCDIR)/demangle.h \
 	$(INCDIR)/dyn-string.h $(INCDIR)/getopt.h $(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/cp-demangle.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/cp-demangle.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/cp-demangle.c
 
-./cp-demint.o: $(srcdir)/cp-demint.c config.h $(INCDIR)/ansidecl.h \
+./cp-demint.lo: $(srcdir)/cp-demint.c config.h $(INCDIR)/ansidecl.h \
 	$(srcdir)/cp-demangle.h $(INCDIR)/demangle.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/cp-demint.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/cp-demint.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/cp-demint.c
 
-./cplus-dem.o: $(srcdir)/cplus-dem.c config.h $(INCDIR)/ansidecl.h \
+./cplus-dem.lo: $(srcdir)/cplus-dem.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/demangle.h $(INCDIR)/libiberty.h \
 	$(INCDIR)/safe-ctype.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/cplus-dem.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/cplus-dem.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/cplus-dem.c
 
-./dyn-string.o: $(srcdir)/dyn-string.c config.h $(INCDIR)/ansidecl.h \
+./dyn-string.lo: $(srcdir)/dyn-string.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/dyn-string.h $(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/dyn-string.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/dyn-string.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/dyn-string.c
 
-./fdmatch.o: $(srcdir)/fdmatch.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/fdmatch.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/fdmatch.c $(OUTPUT_OPTION)
+./fdmatch.lo: $(srcdir)/fdmatch.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/fdmatch.c
 
-./ffs.o: $(srcdir)/ffs.c
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/ffs.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/ffs.c $(OUTPUT_OPTION)
+./ffs.lo: $(srcdir)/ffs.c
+	$(LTCOMPILE) -c -o $@ $(srcdir)/ffs.c
 
-./fibheap.o: $(srcdir)/fibheap.c config.h $(INCDIR)/ansidecl.h \
+./fibheap.lo: $(srcdir)/fibheap.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/fibheap.h $(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/fibheap.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/fibheap.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/fibheap.c
 
-./floatformat.o: $(srcdir)/floatformat.c config.h $(INCDIR)/ansidecl.h \
+./floatformat.lo: $(srcdir)/floatformat.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/floatformat.h $(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/floatformat.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/floatformat.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/floatformat.c
 
-./fnmatch.o: $(srcdir)/fnmatch.c config.h $(INCDIR)/fnmatch.h \
+./fnmatch.lo: $(srcdir)/fnmatch.c config.h $(INCDIR)/fnmatch.h \
 	$(INCDIR)/safe-ctype.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/fnmatch.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/fnmatch.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/fnmatch.c
 
-./getcwd.o: $(srcdir)/getcwd.c config.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/getcwd.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/getcwd.c $(OUTPUT_OPTION)
+./getcwd.lo: $(srcdir)/getcwd.c config.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/getcwd.c
 
-./getopt.o: $(srcdir)/getopt.c config.h $(INCDIR)/getopt.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/getopt.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/getopt.c $(OUTPUT_OPTION)
+./getopt.lo: $(srcdir)/getopt.c config.h $(INCDIR)/getopt.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/getopt.c
 
-./getopt1.o: $(srcdir)/getopt1.c config.h $(INCDIR)/getopt.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/getopt1.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/getopt1.c $(OUTPUT_OPTION)
+./getopt1.lo: $(srcdir)/getopt1.c config.h $(INCDIR)/getopt.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/getopt1.c
 
-./getpagesize.o: $(srcdir)/getpagesize.c config.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/getpagesize.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/getpagesize.c $(OUTPUT_OPTION)
+./getpagesize.lo: $(srcdir)/getpagesize.c config.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/getpagesize.c
 
-./getpwd.o: $(srcdir)/getpwd.c config.h $(INCDIR)/ansidecl.h \
+./getpwd.lo: $(srcdir)/getpwd.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/getpwd.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/getpwd.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/getpwd.c
 
-./getruntime.o: $(srcdir)/getruntime.c config.h $(INCDIR)/ansidecl.h \
+./getruntime.lo: $(srcdir)/getruntime.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/getruntime.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/getruntime.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/getruntime.c
 
-./hashtab.o: $(srcdir)/hashtab.c config.h $(INCDIR)/ansidecl.h \
+./hashtab.lo: $(srcdir)/hashtab.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/hashtab.h $(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/hashtab.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/hashtab.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/hashtab.c
 
-./hex.o: $(srcdir)/hex.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+./hex.lo: $(srcdir)/hex.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
 	$(INCDIR)/safe-ctype.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/hex.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/hex.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/hex.c
 
-./index.o: $(srcdir)/index.c
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/index.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/index.c $(OUTPUT_OPTION)
+./index.lo: $(srcdir)/index.c
+	$(LTCOMPILE) -c -o $@ $(srcdir)/index.c
 
-./insque.o: $(srcdir)/insque.c
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/insque.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/insque.c $(OUTPUT_OPTION)
+./insque.lo: $(srcdir)/insque.c
+	$(LTCOMPILE) -c -o $@ $(srcdir)/insque.c
 
-./lbasename.o: $(srcdir)/lbasename.c $(INCDIR)/ansidecl.h $(INCDIR)/filenames.h \
+./lbasename.lo: $(srcdir)/lbasename.c $(INCDIR)/ansidecl.h $(INCDIR)/filenames.h \
 	$(INCDIR)/libiberty.h $(INCDIR)/safe-ctype.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/lbasename.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/lbasename.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/lbasename.c
 
-./lrealpath.o: $(srcdir)/lrealpath.c config.h $(INCDIR)/ansidecl.h \
+./lrealpath.lo: $(srcdir)/lrealpath.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/lrealpath.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/lrealpath.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/lrealpath.c
 
-./make-relative-prefix.o: $(srcdir)/make-relative-prefix.c config.h \
+./make-relative-prefix.lo: $(srcdir)/make-relative-prefix.c config.h \
 	$(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/make-relative-prefix.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/make-relative-prefix.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/make-relative-prefix.c
 
-./make-temp-file.o: $(srcdir)/make-temp-file.c config.h $(INCDIR)/ansidecl.h \
+./make-temp-file.lo: $(srcdir)/make-temp-file.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/make-temp-file.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/make-temp-file.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/make-temp-file.c
 
-./md5.o: $(srcdir)/md5.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/md5.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/md5.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/md5.c $(OUTPUT_OPTION)
+./md5.lo: $(srcdir)/md5.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/md5.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/md5.c
 
-./memchr.o: $(srcdir)/memchr.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/memchr.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/memchr.c $(OUTPUT_OPTION)
+./memchr.lo: $(srcdir)/memchr.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/memchr.c
 
-./memcmp.o: $(srcdir)/memcmp.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/memcmp.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/memcmp.c $(OUTPUT_OPTION)
+./memcmp.lo: $(srcdir)/memcmp.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/memcmp.c
 
-./memcpy.o: $(srcdir)/memcpy.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/memcpy.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/memcpy.c $(OUTPUT_OPTION)
+./memcpy.lo: $(srcdir)/memcpy.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/memcpy.c
 
-./memmove.o: $(srcdir)/memmove.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/memmove.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/memmove.c $(OUTPUT_OPTION)
+./memmove.lo: $(srcdir)/memmove.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/memmove.c
 
-./mempcpy.o: $(srcdir)/mempcpy.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/mempcpy.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/mempcpy.c $(OUTPUT_OPTION)
+./mempcpy.lo: $(srcdir)/mempcpy.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/mempcpy.c
 
-./memset.o: $(srcdir)/memset.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/memset.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/memset.c $(OUTPUT_OPTION)
+./memset.lo: $(srcdir)/memset.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/memset.c
 
-./mkstemps.o: $(srcdir)/mkstemps.c config.h $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/mkstemps.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/mkstemps.c $(OUTPUT_OPTION)
+./mkstemps.lo: $(srcdir)/mkstemps.c config.h $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/mkstemps.c
 
-./mpw.o: $(srcdir)/mpw.c
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/mpw.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/mpw.c $(OUTPUT_OPTION)
+./mpw.lo: $(srcdir)/mpw.c
+	$(LTCOMPILE) -c -o $@ $(srcdir)/mpw.c
 
-./msdos.o: $(srcdir)/msdos.c
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/msdos.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/msdos.c $(OUTPUT_OPTION)
+./msdos.lo: $(srcdir)/msdos.c
+	$(LTCOMPILE) -c -o $@ $(srcdir)/msdos.c
 
-./objalloc.o: $(srcdir)/objalloc.c config.h $(INCDIR)/ansidecl.h \
+./objalloc.lo: $(srcdir)/objalloc.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/objalloc.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/objalloc.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/objalloc.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/objalloc.c
 
-./obstack.o: $(srcdir)/obstack.c config.h $(INCDIR)/obstack.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/obstack.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/obstack.c $(OUTPUT_OPTION)
+./obstack.lo: $(srcdir)/obstack.c config.h $(INCDIR)/obstack.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/obstack.c
 
-./partition.o: $(srcdir)/partition.c config.h $(INCDIR)/ansidecl.h \
+./partition.lo: $(srcdir)/partition.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(INCDIR)/partition.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/partition.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/partition.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/partition.c
 
-./pex-djgpp.o: $(srcdir)/pex-djgpp.c config.h $(INCDIR)/ansidecl.h \
+./pex-djgpp.lo: $(srcdir)/pex-djgpp.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-djgpp.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/pex-djgpp.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/pex-djgpp.c
 
-./pex-mpw.o: $(srcdir)/pex-mpw.c config.h $(INCDIR)/ansidecl.h \
+./pex-mpw.lo: $(srcdir)/pex-mpw.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-mpw.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/pex-mpw.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/pex-mpw.c
 
-./pex-msdos.o: $(srcdir)/pex-msdos.c config.h $(INCDIR)/ansidecl.h \
+./pex-msdos.lo: $(srcdir)/pex-msdos.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(srcdir)/pex-common.h \
 	$(INCDIR)/safe-ctype.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-msdos.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/pex-msdos.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/pex-msdos.c
 
-./pex-os2.o: $(srcdir)/pex-os2.c config.h $(INCDIR)/ansidecl.h \
+./pex-os2.lo: $(srcdir)/pex-os2.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-os2.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/pex-os2.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/pex-os2.c
 
-./pex-unix.o: $(srcdir)/pex-unix.c config.h $(INCDIR)/ansidecl.h \
+./pex-unix.lo: $(srcdir)/pex-unix.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-unix.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/pex-unix.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/pex-unix.c
 
-./pex-win32.o: $(srcdir)/pex-win32.c config.h $(INCDIR)/ansidecl.h \
+./pex-win32.lo: $(srcdir)/pex-win32.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-win32.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/pex-win32.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/pex-win32.c
 
-./physmem.o: $(srcdir)/physmem.c config.h $(INCDIR)/ansidecl.h \
+./physmem.lo: $(srcdir)/physmem.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/physmem.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/physmem.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/physmem.c
 
-./putenv.o: $(srcdir)/putenv.c config.h $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/putenv.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/putenv.c $(OUTPUT_OPTION)
+./putenv.lo: $(srcdir)/putenv.c config.h $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/putenv.c
 
-./random.o: $(srcdir)/random.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/random.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/random.c $(OUTPUT_OPTION)
+./random.lo: $(srcdir)/random.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/random.c
 
-./regex.o: $(srcdir)/regex.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/xregex.h \
+./regex.lo: $(srcdir)/regex.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/xregex.h \
 	$(INCDIR)/xregex2.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/regex.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/regex.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/regex.c
 
-./rename.o: $(srcdir)/rename.c config.h $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/rename.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/rename.c $(OUTPUT_OPTION)
+./rename.lo: $(srcdir)/rename.c config.h $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/rename.c
 
-./rindex.o: $(srcdir)/rindex.c
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/rindex.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/rindex.c $(OUTPUT_OPTION)
+./rindex.lo: $(srcdir)/rindex.c
+	$(LTCOMPILE) -c -o $@ $(srcdir)/rindex.c
 
-./safe-ctype.o: $(srcdir)/safe-ctype.c $(INCDIR)/ansidecl.h \
+./safe-ctype.lo: $(srcdir)/safe-ctype.c $(INCDIR)/ansidecl.h \
 	$(INCDIR)/safe-ctype.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/safe-ctype.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/safe-ctype.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/safe-ctype.c
 
-./setenv.o: $(srcdir)/setenv.c config.h $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/setenv.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/setenv.c $(OUTPUT_OPTION)
+./setenv.lo: $(srcdir)/setenv.c config.h $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/setenv.c
 
-./sigsetmask.o: $(srcdir)/sigsetmask.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/sigsetmask.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/sigsetmask.c $(OUTPUT_OPTION)
+./sigsetmask.lo: $(srcdir)/sigsetmask.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/sigsetmask.c
 
-./snprintf.o: $(srcdir)/snprintf.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/snprintf.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/snprintf.c $(OUTPUT_OPTION)
+./snprintf.lo: $(srcdir)/snprintf.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/snprintf.c
 
-./sort.o: $(srcdir)/sort.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+./sort.lo: $(srcdir)/sort.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
 	$(INCDIR)/sort.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/sort.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/sort.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/sort.c
 
-./spaces.o: $(srcdir)/spaces.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/spaces.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/spaces.c $(OUTPUT_OPTION)
+./spaces.lo: $(srcdir)/spaces.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/spaces.c
 
-./splay-tree.o: $(srcdir)/splay-tree.c config.h $(INCDIR)/ansidecl.h \
+./splay-tree.lo: $(srcdir)/splay-tree.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(INCDIR)/splay-tree.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/splay-tree.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/splay-tree.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/splay-tree.c
 
-./stpcpy.o: $(srcdir)/stpcpy.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/stpcpy.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/stpcpy.c $(OUTPUT_OPTION)
+./stpcpy.lo: $(srcdir)/stpcpy.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/stpcpy.c
 
-./stpncpy.o: $(srcdir)/stpncpy.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/stpncpy.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/stpncpy.c $(OUTPUT_OPTION)
+./stpncpy.lo: $(srcdir)/stpncpy.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/stpncpy.c
 
-./strcasecmp.o: $(srcdir)/strcasecmp.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strcasecmp.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/strcasecmp.c $(OUTPUT_OPTION)
+./strcasecmp.lo: $(srcdir)/strcasecmp.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/strcasecmp.c
 
-./strchr.o: $(srcdir)/strchr.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strchr.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/strchr.c $(OUTPUT_OPTION)
+./strchr.lo: $(srcdir)/strchr.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/strchr.c
 
-./strdup.o: $(srcdir)/strdup.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strdup.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/strdup.c $(OUTPUT_OPTION)
+./strdup.lo: $(srcdir)/strdup.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/strdup.c
 
-./strerror.o: $(srcdir)/strerror.c config.h $(INCDIR)/ansidecl.h \
+./strerror.lo: $(srcdir)/strerror.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strerror.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/strerror.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/strerror.c
 
-./strncasecmp.o: $(srcdir)/strncasecmp.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strncasecmp.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/strncasecmp.c $(OUTPUT_OPTION)
+./strncasecmp.lo: $(srcdir)/strncasecmp.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/strncasecmp.c
 
-./strncmp.o: $(srcdir)/strncmp.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strncmp.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/strncmp.c $(OUTPUT_OPTION)
+./strncmp.lo: $(srcdir)/strncmp.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/strncmp.c
 
-./strrchr.o: $(srcdir)/strrchr.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strrchr.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/strrchr.c $(OUTPUT_OPTION)
+./strrchr.lo: $(srcdir)/strrchr.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/strrchr.c
 
-./strsignal.o: $(srcdir)/strsignal.c config.h $(INCDIR)/ansidecl.h \
+./strsignal.lo: $(srcdir)/strsignal.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strsignal.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/strsignal.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/strsignal.c
 
-./strstr.o: $(srcdir)/strstr.c
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strstr.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/strstr.c $(OUTPUT_OPTION)
+./strstr.lo: $(srcdir)/strstr.c
+	$(LTCOMPILE) -c -o $@ $(srcdir)/strstr.c
 
-./strtod.o: $(srcdir)/strtod.c $(INCDIR)/ansidecl.h $(INCDIR)/safe-ctype.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strtod.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/strtod.c $(OUTPUT_OPTION)
+./strtod.lo: $(srcdir)/strtod.c $(INCDIR)/ansidecl.h $(INCDIR)/safe-ctype.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/strtod.c
 
-./strtol.o: $(srcdir)/strtol.c config.h $(INCDIR)/safe-ctype.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strtol.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/strtol.c $(OUTPUT_OPTION)
+./strtol.lo: $(srcdir)/strtol.c config.h $(INCDIR)/safe-ctype.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/strtol.c
 
-./strtoul.o: $(srcdir)/strtoul.c config.h $(INCDIR)/ansidecl.h \
+./strtoul.lo: $(srcdir)/strtoul.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/safe-ctype.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strtoul.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/strtoul.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/strtoul.c
 
-./ternary.o: $(srcdir)/ternary.c config.h $(INCDIR)/ansidecl.h \
+./ternary.lo: $(srcdir)/ternary.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(INCDIR)/ternary.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/ternary.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/ternary.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/ternary.c
 
-./tmpnam.o: $(srcdir)/tmpnam.c
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/tmpnam.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/tmpnam.c $(OUTPUT_OPTION)
+./tmpnam.lo: $(srcdir)/tmpnam.c
+	$(LTCOMPILE) -c -o $@ $(srcdir)/tmpnam.c
 
-./vasprintf.o: $(srcdir)/vasprintf.c config.h $(INCDIR)/ansidecl.h \
+./vasprintf.lo: $(srcdir)/vasprintf.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/vasprintf.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/vasprintf.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/vasprintf.c
 
-./vfork.o: $(srcdir)/vfork.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/vfork.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/vfork.c $(OUTPUT_OPTION)
+./vfork.lo: $(srcdir)/vfork.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/vfork.c
 
-./vfprintf.o: $(srcdir)/vfprintf.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/vfprintf.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/vfprintf.c $(OUTPUT_OPTION)
+./vfprintf.lo: $(srcdir)/vfprintf.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/vfprintf.c
 
-./vprintf.o: $(srcdir)/vprintf.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/vprintf.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/vprintf.c $(OUTPUT_OPTION)
+./vprintf.lo: $(srcdir)/vprintf.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/vprintf.c
 
-./vsnprintf.o: $(srcdir)/vsnprintf.c config.h $(INCDIR)/ansidecl.h \
+./vsnprintf.lo: $(srcdir)/vsnprintf.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/vsnprintf.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/vsnprintf.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/vsnprintf.c
 
-./vsprintf.o: $(srcdir)/vsprintf.c $(INCDIR)/ansidecl.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/vsprintf.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/vsprintf.c $(OUTPUT_OPTION)
+./vsprintf.lo: $(srcdir)/vsprintf.c $(INCDIR)/ansidecl.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/vsprintf.c
 
-./waitpid.o: $(srcdir)/waitpid.c config.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/waitpid.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/waitpid.c $(OUTPUT_OPTION)
+./waitpid.lo: $(srcdir)/waitpid.c config.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/waitpid.c
 
-./xatexit.o: $(srcdir)/xatexit.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/xatexit.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/xatexit.c $(OUTPUT_OPTION)
+./xatexit.lo: $(srcdir)/xatexit.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/xatexit.c
 
-./xexit.o: $(srcdir)/xexit.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/xexit.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/xexit.c $(OUTPUT_OPTION)
+./xexit.lo: $(srcdir)/xexit.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+	$(LTCOMPILE) -c -o $@ $(srcdir)/xexit.c
 
-./xmalloc.o: $(srcdir)/xmalloc.c config.h $(INCDIR)/ansidecl.h \
+./xmalloc.lo: $(srcdir)/xmalloc.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/xmalloc.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/xmalloc.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/xmalloc.c
 
-./xmemdup.o: $(srcdir)/xmemdup.c config.h $(INCDIR)/ansidecl.h \
+./xmemdup.lo: $(srcdir)/xmemdup.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/xmemdup.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/xmemdup.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/xmemdup.c
 
-./xstrdup.o: $(srcdir)/xstrdup.c config.h $(INCDIR)/ansidecl.h \
+./xstrdup.lo: $(srcdir)/xstrdup.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/xstrdup.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/xstrdup.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/xstrdup.c
 
-./xstrerror.o: $(srcdir)/xstrerror.c config.h $(INCDIR)/ansidecl.h \
+./xstrerror.lo: $(srcdir)/xstrerror.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	if [ x"$(PICFLAG)" != x ]; then \
-	  $(COMPILE.c) $(PICFLAG) $(srcdir)/xstrerror.c -o pic/$@; \
-	else true; fi
-	$(COMPILE.c) $(srcdir)/xstrerror.c $(OUTPUT_OPTION)
+	$(LTCOMPILE) -c -o $@ $(srcdir)/xstrerror.c
 
-# Don't export variables to the environment, in order to not confuse
-# configure.
-.NOEXPORT:

libiberty/aclocal.m4

 sinclude(../config/accross.m4)
 sinclude(../config/acx.m4)
 sinclude(../config/no-executables.m4)
+sinclude(../libtool.m4)
 
 dnl See whether strncmp reads past the end of its string parameters.
 dnl On some versions of SunOS4 at least, strncmp reads a word at a time

libiberty/config.table

@@ -20,33 +20,6 @@ else
   frags=
 fi
 
-# If they didn't specify --enable-shared, don't generate shared libs.
-case "${enable_shared}" in
-  yes) shared=yes ;;
-  no) shared=no ;;
-  "") shared=no ;;
-  *) shared=yes ;;
-esac
-if [ "${shared}" = "yes" ]; then
-  frag=
-  case "${host}" in
-    *-*-cygwin*)	;;
-    alpha*-*-linux*)	frag=mh-elfalphapic ;;
-    arm*-*-*)		frag=mh-armpic ;;
-    hppa*-*-*)		frag=mh-papic ;;
-    i[34567]86-*-* | x86_64-*-*)
-			frag=mh-x86pic ;;
-    powerpc*-*-aix*)	;;
-    powerpc*-*-*)	frag=mh-ppcpic ;;
-    sparc*-*-*)		frag=mh-sparcpic ;;
-    s390*-*-*)		frag=mh-s390pic ;;
-    *)			frag=mh-${host_cpu}pic ;;
-  esac
-  if [ -n "${frag}" ]; then
-    frags="${frags} ${libiberty_topdir}/config/${frag}"
-  fi
-fi
-
 echo "# Warning: this fragment is automatically generated" > temp-frag
 
 for frag in ${frags}; do

libiberty/configure

@@ -309,7 +309,7 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS libiberty_topdir MAINT NOTMAINT MAKEINFO BUILD_INFO PERL HAVE_PERL build build_cpu build_vendor build_os host host_cpu host_vendor host_os AR ac_ct_AR RANLIB ac_ct_RANLIB CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP ac_libiberty_warn_cflags NO_MINUS_C_MINUS_O OUTPUT_OPTION INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA EGREP LIBOBJS CHECK target_header_dir pexecute INSTALL_DEST LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS libiberty_topdir MAINT NOTMAINT MAKEINFO BUILD_INFO PERL HAVE_PERL build build_cpu build_vendor build_os host host_cpu host_vendor host_os AR ac_ct_AR RANLIB ac_ct_RANLIB CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP LN_S STRIP ac_ct_STRIP LIBTOOL ac_libiberty_warn_cflags INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA EGREP LIBOBJS CHECK target_header_dir pexecute ltpexecute INSTALL_DEST LTLIBOBJS'
 ac_subst_files='host_makefile_frag'
 
 # Initialize some variables set by options.
@@ -847,6 +847,10 @@ Optional Features:
   --enable-maintainer-mode
                           enable make rules and dependencies not useful
                           (and sometimes confusing) to the casual installer
+  --enable-shared=PKGS  build shared libraries default=yes
+  --enable-static=PKGS  build static libraries default=yes
+  --enable-fast-install=PKGS  optimize for fast installation default=yes
+  --disable-libtool-lock  avoid locking (might break parallel builds)
   --enable-install-libiberty       Install headers for end users
 
 Optional Packages:
@@ -856,6 +860,8 @@ Optional Packages:
   --with-build-subdir=SUBDIR       Configuring in a subdirectory for build
   --with-cross-host=HOST           Configuring with a cross compiler
   --with-newlib                    Configuring with newlib
+  --with-gnu-ld           assume the C compiler uses GNU ld default=no
+  --with-pic              try to use only PIC/non-PIC objects default=use both
 
 Some influential environment variables:
   CC          C compiler command
@@ -957,7 +963,7 @@ esac
     else
       echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
     fi
-    cd "$ac_popdir"
+    cd $ac_popdir
   done
 fi
 
@@ -2330,7 +2336,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2388,7 +2395,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2504,7 +2512,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2558,7 +2567,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2603,7 +2613,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2647,7 +2658,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2923,24 +2935,865 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 ac_c_preproc_warn_flag=yes
 
-if test x$GCC = xyes; then
-  ac_libiberty_warn_cflags='-W -Wall -Wtraditional -pedantic'
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+  enableval="$enable_shared"
+  p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+  enable_shared=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_shared=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac
+else
+  enable_shared=yes
+fi;
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+  enableval="$enable_static"
+  p=${PACKAGE-default}
+case $enableval in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+  enable_static=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_static=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac
+else
+  enable_static=yes
+fi;
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+  enableval="$enable_fast_install"
+  p=${PACKAGE-default}
+case $enableval in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+  enable_fast_install=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_fast_install=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac
+else
+  enable_fast_install=yes
+fi;
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+  withval="$with_gnu_ld"
+  test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi;
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  echo "$as_me:$LINENO: checking for ld used by GCC" >&5
+echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | [A-Za-z]:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+else
+  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+fi
+if test "${lt_cv_path_LD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -z "$LD"; then
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	test "$with_gnu_ld" != no && break
+      else
+	test "$with_gnu_ld" != yes && break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+if test "${lt_cv_prog_gnu_ld+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  lt_cv_prog_gnu_ld=yes
+else
+  lt_cv_prog_gnu_ld=no
+fi
 fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
-if test "x$CC" != xcc; then
-  echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5
-echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6
+echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
+if test "${lt_cv_ld_reload_flag+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5
-echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6
+  lt_cv_ld_reload_flag='-r'
 fi
-set dummy $CC; ac_cc=`echo $2 |
-		      sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-if eval "test \"\${ac_cv_prog_cc_${ac_cc}_c_o+set}\" = set"; then
+echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
+echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
+if test "${lt_cv_path_NM+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+    test -z "$ac_dir" && ac_dir=.
+    tmp_nm=$ac_dir/${ac_tool_prefix}nm
+    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+      # Check to see if the nm accepts a BSD-compat flag.
+      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+      #   nm: unknown option "B" ignored
+      # Tru64's nm complains that /dev/null is an invalid object file
+      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+	lt_cv_path_NM="$tmp_nm -B"
+	break
+      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	lt_cv_path_NM="$tmp_nm -p"
+	break
+      else
+	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	continue # so that we can try to find one that supports BSD flags
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi
+fi
+
+NM="$lt_cv_path_NM"
+echo "$as_me:$LINENO: result: $NM" >&5
+echo "${ECHO_T}$NM" >&6
+
+echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+  echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6
+fi
+
+echo "$as_me:$LINENO: checking how to recognise dependant libraries" >&5
+echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6
+if test "${lt_cv_deplibs_check_method+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi4*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin* | mingw* |pw32*)
+  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  # this will be overwritten by pass_all, but leave it in just in case
+  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  case "$host_os" in
+  rhapsody* | darwin1.012)
+    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
+    ;;
+  *) # Darwin 1.3 on
+    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+    ;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | kfreebsd*-gnu)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20*|hpux11*)
+  case $host_cpu in
+  hppa*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+    lt_cv_file_magic_cmd=/usr/bin/file
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_cmd=/usr/bin/file
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  esac
+  ;;
+
+irix5* | irix6*)
+  case $host_os in
+  irix5*)
+    # this will be overridden with pass_all, but let us keep it just in case
+    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+    ;;
+  *)
+    case $LD in
+    *-32|*"-32 ") libmagic=32-bit;;
+    *-n32|*"-n32 ") libmagic=N32;;
+    *-64|*"-64 ") libmagic=64-bit;;
+    *) libmagic=never-match;;
+    esac
+    # this will be overridden with pass_all, but let us keep it just in case
+    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+    ;;
+  esac
+  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd* | knetbsd*-gnu)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
+  fi
+  ;;
+
+newsos6)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+osf3* | osf4* | osf5*)
+  # this will be overridden with pass_all, but let us keep it just in case
+  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sco3.2v5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  lt_cv_file_magic_test_file=/lib/libc.so
+  ;;
+
+sysv5uw[78]* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  case $host_vendor in
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  esac
+  ;;
+esac
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+
+
+
+
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  case $MAGIC_CMD in
+  /*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+  ?:/*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+  ;;
+  *)
+  ac_save_MAGIC_CMD="$MAGIC_CMD"
+  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="/usr/bin:$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    egrep "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  MAGIC_CMD="$ac_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    echo "$as_me:$LINENO: checking for file" >&5
+echo $ECHO_N "checking for file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  case $MAGIC_CMD in
+  /*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+  ?:/*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+  ;;
+  *)
+  ac_save_MAGIC_CMD="$MAGIC_CMD"
+  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="/usr/bin:$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    egrep "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  MAGIC_CMD="$ac_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  RANLIB=$ac_ct_RANLIB
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  STRIP=$ac_ct_STRIP
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval="$enable_libtool_lock"
+
+fi;
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+  withval="$with_pic"
+  pic_mode="$withval"
+else
+  pic_mode=default
+fi;
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line 3673 "configure"' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+   if test "$lt_cv_prog_gnu_ld" = yes; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -melf32bsmip"
+      ;;
+    *N32*)
+      LD="${LD-ld} -melf32bmipn32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -melf64bmip"
+      ;;
+    esac
+   else
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+   fi
+  fi
+  rm -rf conftest*
+  ;;
+
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case "`/usr/bin/file conftest.o`" in
+    *ELF-32*)
+      HPUX_IA64_MODE="32"
+      ;;
+    *ELF-64*)
+      HPUX_IA64_MODE="64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case "`/usr/bin/file conftest.o`" in
+    *32-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_i386"
+          ;;
+        ppc64-*linux*|powerpc64-*linux*)
+          LD="${LD-ld} -m elf32ppclinux"
+          ;;
+        s390x-*linux*)
+          LD="${LD-ld} -m elf_s390"
+          ;;
+        sparc64-*linux*)
+          LD="${LD-ld} -m elf32_sparc"
+          ;;
+      esac
+      ;;
+    *64-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        ppc*-*linux*|powerpc*-*linux*)
+          LD="${LD-ld} -m elf64ppc"
+          ;;
+        s390*-*linux*)
+          LD="${LD-ld} -m elf64_s390"
+          ;;
+        sparc*-*linux*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
+if test "${lt_cv_cc_needs_belf+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     if test x$gcc_no_link = xyes; then
+  { { echo "$as_me:$LINENO: error: Link tests are not allowed after GCC_NO_EXECUTABLES." >&5
+echo "$as_me: error: Link tests are not allowed after GCC_NO_EXECUTABLES." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2955,77 +3808,163 @@ main ()
   return 0;
 }
 _ACEOF
-# Make sure it works both with $CC and with simple cc.
-# We do the test twice because some compilers refuse to overwrite an
-# existing .o file with -o, though they will create one.
-ac_try='$CC -c conftest.$ac_ext -o conftest.$ac_objext >&5'
-if { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-   test -f conftest.$ac_objext && { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); };
-then
-  eval ac_cv_prog_cc_${ac_cc}_c_o=yes
-  if test "x$CC" != xcc; then
-    # Test first that cc exists at all.
-    if { ac_try='cc -c conftest.$ac_ext >&5'
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
-      ac_try='cc -c conftest.$ac_ext -o conftest.$ac_objext >&5'
-      if { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 test -f conftest.$ac_objext && { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); };
-      then
-	# cc works too.
-	:
-      else
-	# cc exists but doesn't like -o.
-	eval ac_cv_prog_cc_${ac_cc}_c_o=no
-      fi
-    fi
-  fi
+  lt_cv_cc_needs_belf=yes
 else
-  eval ac_cv_prog_cc_${ac_cc}_c_o=no
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+lt_cv_cc_needs_belf=no
 fi
-rm -f conftest*
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 fi
-if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = yes"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+
+
+esac
+
+
+# Save cache, so that ltconfig can load it
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
 
-cat >>confdefs.h <<\_ACEOF
-#define NO_MINUS_C_MINUS_O 1
 _ACEOF
 
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+  (set) 2>&1 |
+    case `(ac_space=' '; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
+      # `set' does not quote correctly, so add quotes (double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \).
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;;
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n \
+	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      ;;
+    esac;
+} |
+  sed '
+     t clear
+     : clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+  if test -w $cache_file; then
+    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+    cat confcache >$cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
 fi
+rm -f confcache
+
+# Actually configure libtool.  ac_aux_dir is where install-sh is found.
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
+|| { { echo "$as_me:$LINENO: error: libtool configure failed" >&5
+echo "$as_me: error: libtool configure failed" >&2;}
+   { (exit 1); exit 1; }; }
 
-# autoconf is lame and doesn't give us any substitution variable for this.
-if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
-  NO_MINUS_C_MINUS_O=yes
+# Reload cache, that may have been modified by ltconfig
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special
+  # files actually), so we avoid doing that.
+  if test -f "$cache_file"; then
+    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . $cache_file;;
+      *)                      . ./$cache_file;;
+    esac
+  fi
 else
-  OUTPUT_OPTION='-o $@'
+  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
 fi
 
 
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+
+
+
+
+
+
+
+if test x$GCC = xyes; then
+  ac_libiberty_warn_cflags='-W -Wall -Wtraditional -pedantic'
+fi
 
 
 echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
@@ -3103,7 +4042,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3163,7 +4103,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3239,7 +4180,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3280,7 +4222,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3622,7 +4565,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3686,7 +4630,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3747,7 +4692,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3828,7 +4774,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4057,7 +5004,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4119,7 +5067,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4159,7 +5108,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4215,7 +5165,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4255,7 +5206,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4319,7 +5271,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4350,8 +5303,10 @@ See \`config.log' for more details." >&2;}
 esac
 else
   if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
-echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
+  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -4464,7 +5419,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4530,7 +5486,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4576,7 +5533,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4622,7 +5580,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4699,7 +5658,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4932,7 +5892,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5346,7 +6307,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5405,7 +6367,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5505,7 +6468,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5643,7 +6607,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5864,7 +6829,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -6209,7 +7175,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -6320,7 +7287,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -6389,7 +7357,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -6454,7 +7423,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -6550,7 +7520,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -6626,7 +7597,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -6662,12 +7634,15 @@ fi
 
 # Figure out which version of pexecute to use.
 case "${host}" in
-     *-*-mingw* | *-*-winnt*)	pexecute=./pex-win32.o  ;;
-     *-*-msdosdjgpp*)		pexecute=./pex-djgpp.o  ;;
-     *-*-msdos*)		pexecute=./pex-msdos.o  ;;
-     *-*-os2-emx*)		pexecute=./pex-os2.o    ;;
-     *)				pexecute=./pex-unix.o   ;;
+     *-*-mingw* | *-*-winnt*)	pex=./pex-win32  ;;
+     *-*-msdosdjgpp*)		pex=./pex-djgpp  ;;
+     *-*-msdos*)		pex=./pex-msdos  ;;
+     *-*-os2-emx*)		pex=./pex-os2    ;;
+     *)				pex=./pex-unix   ;;
 esac
+pexecute=${pex}.o
+ltpexecute=${pex}.lo
+
 
 
 if test x$gcc_no_link = xyes; then
@@ -6799,7 +7774,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7131,16 +8107,6 @@ else
 fi
 
 
-
-L=""
-for l in x $LIBOBJS; do
-  case $l in
-    x) ;;
-    *) L="$L ./$l" ;;
-  esac
-done
-LIBOBJS="$L"
-
 # We need multilib support, but only if configuring for the target.
                     ac_config_files="$ac_config_files Makefile testsuite/Makefile"
 
@@ -7806,9 +8772,11 @@ s,@ac_ct_CC@,$ac_ct_CC,;t t
 s,@EXEEXT@,$EXEEXT,;t t
 s,@OBJEXT@,$OBJEXT,;t t
 s,@CPP@,$CPP,;t t
+s,@LN_S@,$LN_S,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@LIBTOOL@,$LIBTOOL,;t t
 s,@ac_libiberty_warn_cflags@,$ac_libiberty_warn_cflags,;t t
-s,@NO_MINUS_C_MINUS_O@,$NO_MINUS_C_MINUS_O,;t t
-s,@OUTPUT_OPTION@,$OUTPUT_OPTION,;t t
 s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
 s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
 s,@INSTALL_DATA@,$INSTALL_DATA,;t t
@@ -7817,6 +8785,7 @@ s,@LIBOBJS@,$LIBOBJS,;t t
 s,@CHECK@,$CHECK,;t t
 s,@target_header_dir@,$target_header_dir,;t t
 s,@pexecute@,$pexecute,;t t
+s,@ltpexecute@,$ltpexecute,;t t
 s,@INSTALL_DEST@,$INSTALL_DEST,;t t
 s,@LTLIBOBJS@,$LTLIBOBJS,;t t
 /@host_makefile_frag@/r $host_makefile_frag
@@ -7987,6 +8956,11 @@ esac
   *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
   esac
 
+  if test x"$ac_file" != x-; then
+    { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    rm -f "$ac_file"
+  fi
   # Let's still pretend it is `configure' which instantiates (i.e., don't
   # use $as_me), people would be surprised to read:
   #    /* config.h.  Generated by config.status.  */
@@ -8025,12 +8999,6 @@ echo "$as_me: error: cannot find input file: $f" >&2;}
 	 fi;;
       esac
     done` || { (exit 1); exit 1; }
-
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
   sed "$ac_vpsub

libiberty/configure.ac

@@ -113,21 +113,13 @@ GCC_NO_EXECUTABLES
 AC_PROG_CC
 AC_PROG_CPP_WERROR
 
+AC_PROG_LIBTOOL
+
 if test x$GCC = xyes; then
   ac_libiberty_warn_cflags='-W -Wall -Wtraditional -pedantic'
 fi
 AC_SUBST(ac_libiberty_warn_cflags)
 
-AC_PROG_CC_C_O
-# autoconf is lame and doesn't give us any substitution variable for this.
-if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
-  NO_MINUS_C_MINUS_O=yes
-else
-  OUTPUT_OPTION='-o $@'
-fi
-AC_SUBST(NO_MINUS_C_MINUS_O)
-AC_SUBST(OUTPUT_OPTION)
-
 AC_C_CONST
 AC_C_INLINE
 AC_C_BIGENDIAN_CROSS
@@ -515,13 +507,16 @@ fi
 
 # Figure out which version of pexecute to use.
 case "${host}" in
-     *-*-mingw* | *-*-winnt*)	pexecute=./pex-win32.o  ;;
-     *-*-msdosdjgpp*)		pexecute=./pex-djgpp.o  ;;
-     *-*-msdos*)		pexecute=./pex-msdos.o  ;;
-     *-*-os2-emx*)		pexecute=./pex-os2.o    ;;
-     *)				pexecute=./pex-unix.o   ;;
+     *-*-mingw* | *-*-winnt*)	pex=./pex-win32  ;;
+     *-*-msdosdjgpp*)		pex=./pex-djgpp  ;;
+     *-*-msdos*)		pex=./pex-msdos  ;;
+     *-*-os2-emx*)		pex=./pex-os2    ;;
+     *)				pex=./pex-unix   ;;
 esac
+pexecute=${pex}.o
+ltpexecute=${pex}.lo
 AC_SUBST(pexecute)
+AC_SUBST(ltpexecute)
 
 libiberty_AC_FUNC_STRNCMP
 
@@ -534,16 +529,6 @@ else
 fi
 AC_SUBST(INSTALL_DEST)
 
-m4_pattern_allow(LIBOBJS)
-L=""
-for l in x $LIBOBJS; do
-  case $l in
-    x) ;;
-    *) L="$L ./$l" ;;
-  esac
-done
-LIBOBJS="$L"
-
 # We need multilib support, but only if configuring for the target.
 AC_CONFIG_FILES([Makefile testsuite/Makefile])
 AC_CONFIG_COMMANDS([default],

libiberty/maint-tool

@@ -76,7 +76,7 @@ sub missing {
     for $f (sort keys %listed) {
 	if ($f =~ /(.*)\.c$/) {
 	    $base = $1;
-	    if (! $listed{"$base.o"}) {
+	    if (! $listed{"$base.lo"}) {
 		print "O $f\n";
 	    }
 	}
@@ -213,10 +213,7 @@ sub locals_first {
 
 sub deps {
 
-    $crule  = "\tif [ x\"\$(PICFLAG)\" != x ]; then \\\n";
-    $crule .= "\t  \$(COMPILE.c) \$(PICFLAG) \$< -o pic/\$@; \\\n";
-    $crule .= "\telse true; fi\n";
-    $crule .= "\t\$(COMPILE.c) \$< \$(OUTPUT_OPTION)\n";
+    $crule .= "\t\$(LTCOMPILE) -c -o \$@ \$<\n";
     $crule .= "\n";
 
     $incdir = shift @ARGV;
@@ -265,7 +262,7 @@ sub deps {
 	    }
 	    @deps = sort { &locals_first($a,$b) } keys %scanned;
 	    $obj = $f;
-	    $obj =~ s/\.c$/.o/;
+	    $obj =~ s/\.c$/.lo/;
 	    $obj = "./$obj:";
 	    if ($#deps >= 0) {
 		print OUT "$obj \$(srcdir)/$f";