Skip to content

R
riscv-gcc-1
Commit 078e19a4 by Philip Blundell Committed by Nick Clifton
Options

Apply Phillip Blundell's patch to distinguish between new and old binutils. 

From-SVN: r28687
parent 305f3003
Showing with 229 additions and 140 deletions
gcc/config/arm/linux-aout.h
...@@ -35,7 +35,8 @@ Boston, MA 02111-1307, USA. */ ...@@ -35,7 +35,8 @@ Boston, MA 02111-1307, USA. */
#undef CPP_PREDEFINES #undef CPP_PREDEFINES
#define CPP_PREDEFINES \ #define CPP_PREDEFINES \
"-Dunix -Darm -Dlinux -Asystem(unix) -Asystem(posix) -Acpu(arm) -Amachine(arm)" "-Dunix -D__arm__ -Dlinux \
-Asystem(unix) -Asystem(posix) -Acpu(arm) -Amachine(arm)"
#undef LIB_SPEC #undef LIB_SPEC
#define LIB_SPEC \ #define LIB_SPEC \
......
gcc/config/arm/linux-elf.h
...@@ -25,13 +25,34 @@ Boston, MA 02111-1307, USA. */ ...@@ -25,13 +25,34 @@ Boston, MA 02111-1307, USA. */
/* We have libgcc2. */ /* We have libgcc2. */
#define HAVE_ATEXIT #define HAVE_ATEXIT
/* Default is to use APCS-32 mode. */
#ifndef SUBTARGET_DEFAULT_APCS26 #ifndef SUBTARGET_DEFAULT_APCS26
#define TARGET_DEFAULT (ARM_FLAG_APCS_32 | ARM_FLAG_SHORT_BYTE) /* Default is to use APCS-32 mode. */
#define SUBTARGET_EXTRA_LINK_SPEC \ # define TARGET_DEFAULT (ARM_FLAG_APCS_32 | ARM_FLAG_SHORT_BYTE)
# ifdef SUBTARGET_OLD_LINKER
# define SUBTARGET_EXTRA_LINK_SPEC \
" %{mapcs-26:-m elf32arm26} %{!mapcs-26:-m elf32arm}" " %{mapcs-26:-m elf32arm26} %{!mapcs-26:-m elf32arm}"
#define SUBTARGET_EXTRA_ASM_SPEC \ # else /* new linker */
# define SUBTARGET_EXTRA_LINK_SPEC \
" %{mapcs-26:-m armelf_linux26} %{!mapcs-26:-m armelf_linux} -p"
# endif
# define SUBTARGET_EXTRA_ASM_SPEC \
" %{mapcs-26:-mapcs-26} %(!mapcs-26:-mapcs-32}" " %{mapcs-26:-mapcs-26} %(!mapcs-26:-mapcs-32}"
# define MULTILIB_DEFAULTS \
{ "mlittle-endian", "mhard-float", "mapcs-32", "mno-thumb-interwork" }
# define CPP_APCS_PC_DEFAULT_SPEC "-D__APCS_32__"
#else /* default is APCS-26 */
# define TARGET_DEFAULT (ARM_FLAG_SHORT_BYTE)
# ifdef SUBTARGET_OLD_LINKER
# define SUBTARGET_LINK_SPEC \
" %{mapcs-32:-m elf32arm} %{!mapcs-32:-m elf32arm26}"
# else /* new linker */
# define SUBTARGET_LINK_SPEC \
" %{mapcs-32:-m armelf_linux} %{!mapcs-32:-m armelf_linux26} -p"
# endif
# define SUBTARGET_EXTRA_ASM_SPEC \
" %{mapcs-32:-mapcs-32} %(!mapcs-32:-mapcs-26}"
# define MULTILIB_DEFAULTS \
{ "mlittle-endian", "mhard-float", "mapcs-26", "mno-thumb-interwork" }
#endif #endif
/* This was defined in linux.h. Define it here also. */ /* This was defined in linux.h. Define it here also. */
...@@ -45,7 +66,8 @@ Boston, MA 02111-1307, USA. */ ...@@ -45,7 +66,8 @@ Boston, MA 02111-1307, USA. */
#define LIB_SPEC \ #define LIB_SPEC \
"%{shared: -lc} \ "%{shared: -lc} \
%{!shared: %{pthread:-lpthread} \ %{!shared: %{pthread:-lpthread} \
%{profile:-lc_p} %{!profile: -lc}}" %{profile:-lc_p} %{!profile: -lc}}"
#define LIBGCC_SPEC "%{msoft-float:-lfloat} -lgcc" #define LIBGCC_SPEC "%{msoft-float:-lfloat} -lgcc"
...@@ -81,14 +103,17 @@ Boston, MA 02111-1307, USA. */ ...@@ -81,14 +103,17 @@ Boston, MA 02111-1307, USA. */
%{mbig-endian:-EB}" \ %{mbig-endian:-EB}" \
SUBTARGET_EXTRA_LINK_SPEC SUBTARGET_EXTRA_LINK_SPEC
#define ASM_SPEC "%{mbig-endian:-EB} \
%{mcpu=*:-m%*} %{march=*:-m%*} \
%{mthumb-interwork:-mthumb-interwork} \
%{msoft-float:-mno-fpu} \
%{mapcs-float:-mfloat}" \
SUBTARGET_EXTRA_ASM_SPEC
#undef CPP_PREDEFINES #undef CPP_PREDEFINES
#define CPP_PREDEFINES \ #define CPP_PREDEFINES \
"-Dunix -Darm -Dlinux -Asystem(unix) -Asystem(posix) -Acpu(arm) \ "-Dunix -D__arm__ -Dlinux -D__ELF__ \
-Amachine(arm) -D__ELF__ -Darm_elf" -Asystem(unix) -Asystem(posix) -Acpu(arm) -Amachine(arm)"
#ifndef SUBTARGET_DEFAULT_APCS26
#define CPP_APCS_PC_DEFAULT_SPEC "-D__APCS_32__"
#endif
/* Allow #sccs in preprocessor. */ /* Allow #sccs in preprocessor. */
#define SCCS_DIRECTIVE #define SCCS_DIRECTIVE
...@@ -236,10 +261,6 @@ const_section () \ ...@@ -236,10 +261,6 @@ const_section () \
#include "arm/elf.h" #include "arm/elf.h"
#include "arm/linux-gas.h" #include "arm/linux-gas.h"
#ifndef SUBTARGET_DEFAULT_APCS26 /* NWFPE always understands FPA instructions. */
/* On 32-bit machine it is always safe to assume we have the "new"
floating point system.
?? Make this happen for all targets when NWFPE is better established. */
#undef FP_DEFAULT #undef FP_DEFAULT
#define FP_DEFAULT FP_SOFT3 #define FP_DEFAULT FP_SOFT3
#endif
gcc/config/arm/linux-elf26.h
/* Definitions for 26-bit ARM running Linux-based GNU systems using ELF /* Definitions for ARM running Linux-based GNU systems
Copyright (C) 1998 Free Software Foundation, Inc. using ELF and 26-bit APCS.
Contributed by Philip Blundell <philb@gnu.org> Copyright (C) 1999 Free Software Foundation, Inc.
Contributed by Philip Blundell <Philip.Blundell@pobox.com>
This file is part of GNU CC. This file is part of GNU CC.
...@@ -19,14 +20,5 @@ along with this program; see the file COPYING. If not, write to ...@@ -19,14 +20,5 @@ along with this program; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330, the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */ Boston, MA 02111-1307, USA. */
/* Tell linux-elf.h to default to 26-bit mode. */
#define SUBTARGET_DEFAULT_APCS26 #define SUBTARGET_DEFAULT_APCS26
#define SUBTARGET_LINK_SPEC \
" %{mapcs-32:-m elf32arm} %{!mapcs-32:-m elf32arm26}"
#define SUBTARGET_EXTRA_ASM_SPEC \
" %{mapcs-32:-mapcs-32} %(!mapcs-32:-mapcs-26}"
#define TARGET_DEFAULT (ARM_FLAG_SHORT_BYTE)
#include "arm/linux-elf.h"
gcc/config/arm/linux-oldld.h 0 → 100644
/* Definitions for ARM running Linux-based GNU systems
using ELF with old binutils.
Copyright (C) 1999 Free Software Foundation, Inc.
Contributed by Philip Blundell <Philip.Blundell@pobox.com>
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* Unfortunately, owing to various historical accidents, version 2.9.4
and newer of GNU binutils are not quite compatible with the old
(2.9.1-based) toolset. This tells linux-elf.h to generate specs
appropriate for the older versions. */
#define SUBTARGET_OLD_LINKER
gcc/config/arm/t-linux
...@@ -13,10 +13,15 @@ LIBGCC1 = libgcc1-asm.a ...@@ -13,10 +13,15 @@ LIBGCC1 = libgcc1-asm.a
LIB1ASMSRC = arm/lib1funcs.asm LIB1ASMSRC = arm/lib1funcs.asm
LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx
MULTILIB_OPTIONS = mhard-float/msoft-float
MULTILIB_DIRNAMES = hard-float soft-float
# If you want to build both APCS variants as multilib options this is how # If you want to build both APCS variants as multilib options this is how
# to do it. # to do it.
#MULTILIB_OPTIONS = mapcs-32/apcs-26 # MULTILIB_OPTIONS += mapcs-32/mapcs-26
#MULTILIB_DIRNAMES = apcs-32 apcs-26 # MULTILIB_DIRNAMES += apcs-32 apcs-26
EXTRA_MULTILIB_PARTS = crtbegin.o crtend.o
LIBGCC = stmp-multilib LIBGCC = stmp-multilib
INSTALL_LIBGCC = install-multilib INSTALL_LIBGCC = install-multilib
gcc/configure
...@@ -3178,15 +3178,31 @@ for machine in $build $host $target; do ...@@ -3178,15 +3178,31 @@ for machine in $build $host $target; do
tmake_file=arm/t-linux tmake_file=arm/t-linux
gnu_ld=yes gnu_ld=yes
;; ;;
arm*-*-linux-gnu*) # ARM GNU/Linux with ELF arm*-*-linux-gnuoldld*) # ARM GNU/Linux with old ELF linker
xm_file=arm/xm-linux.h xm_file=arm/xm-linux.h
xmake_file=x-linux xmake_file=x-linux
tm_file="arm/linux-oldld.h arm/linux-elf.h"
case $machine in case $machine in
armv2*-*-*) armv2*-*-*)
tm_file=arm/linux-elf26.h tm_file="arm/linux-elf26.h $tm_file"
;; ;;
*) esac
tm_file=arm/linux-elf.h tmake_file="t-linux arm/t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
case x${enable_threads} in
x | xyes | xpthreads | xposix)
thread_file='posix'
;;
esac
;;
arm*-*-linux-gnu*) # ARM GNU/Linux with ELF
xm_file=arm/xm-linux.h
xmake_file=x-linux
tm_file="arm/linux-elf.h"
case $machine in
armv2*-*-*)
tm_file="arm/linux-elf26.h $tm_file"
;; ;;
esac esac
tmake_file="t-linux arm/t-linux" tmake_file="t-linux arm/t-linux"
...@@ -6156,7 +6172,7 @@ fi ...@@ -6156,7 +6172,7 @@ fi
echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6 echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
echo "configure:6160: checking for strerror in -lcposix" >&5 echo "configure:6176: checking for strerror in -lcposix" >&5
ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'` ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -6164,7 +6180,7 @@ else ...@@ -6164,7 +6180,7 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-lcposix $LIBS" LIBS="-lcposix $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6168 "configure" #line 6184 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ /* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2 /* We use char because int might match the return type of a gcc2
...@@ -6175,7 +6191,7 @@ int main() { ...@@ -6175,7 +6191,7 @@ int main() {
strerror() strerror()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:6179: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:6195: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -6198,12 +6214,12 @@ fi ...@@ -6198,12 +6214,12 @@ fi
echo $ac_n "checking for working const""... $ac_c" 1>&6 echo $ac_n "checking for working const""... $ac_c" 1>&6
echo "configure:6202: checking for working const" >&5 echo "configure:6218: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6207 "configure" #line 6223 "configure"
#include "confdefs.h" #include "confdefs.h"
int main() { int main() {
...@@ -6252,7 +6268,7 @@ ccp = (char const *const *) p; ...@@ -6252,7 +6268,7 @@ ccp = (char const *const *) p;
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:6256: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:6272: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
ac_cv_c_const=yes ac_cv_c_const=yes
else else
...@@ -6273,21 +6289,21 @@ EOF ...@@ -6273,21 +6289,21 @@ EOF
fi fi
echo $ac_n "checking for inline""... $ac_c" 1>&6 echo $ac_n "checking for inline""... $ac_c" 1>&6
echo "configure:6277: checking for inline" >&5 echo "configure:6293: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
ac_cv_c_inline=no ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6284 "configure" #line 6300 "configure"
#include "confdefs.h" #include "confdefs.h"
int main() { int main() {
} $ac_kw foo() { } $ac_kw foo() {
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:6291: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:6307: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
ac_cv_c_inline=$ac_kw; break ac_cv_c_inline=$ac_kw; break
else else
...@@ -6313,12 +6329,12 @@ EOF ...@@ -6313,12 +6329,12 @@ EOF
esac esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6 echo $ac_n "checking for off_t""... $ac_c" 1>&6
echo "configure:6317: checking for off_t" >&5 echo "configure:6333: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6322 "configure" #line 6338 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <sys/types.h> #include <sys/types.h>
#if STDC_HEADERS #if STDC_HEADERS
...@@ -6346,12 +6362,12 @@ EOF ...@@ -6346,12 +6362,12 @@ EOF
fi fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6 echo $ac_n "checking for size_t""... $ac_c" 1>&6
echo "configure:6350: checking for size_t" >&5 echo "configure:6366: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6355 "configure" #line 6371 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <sys/types.h> #include <sys/types.h>
#if STDC_HEADERS #if STDC_HEADERS
...@@ -6381,19 +6397,19 @@ fi ...@@ -6381,19 +6397,19 @@ fi
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless! # for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
echo "configure:6385: checking for working alloca.h" >&5 echo "configure:6401: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6390 "configure" #line 6406 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <alloca.h> #include <alloca.h>
int main() { int main() {
char *p = alloca(2 * sizeof(int)); char *p = alloca(2 * sizeof(int));
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:6397: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:6413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
ac_cv_header_alloca_h=yes ac_cv_header_alloca_h=yes
else else
...@@ -6414,12 +6430,12 @@ EOF ...@@ -6414,12 +6430,12 @@ EOF
fi fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6 echo $ac_n "checking for alloca""... $ac_c" 1>&6
echo "configure:6418: checking for alloca" >&5 echo "configure:6434: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6423 "configure" #line 6439 "configure"
#include "confdefs.h" #include "confdefs.h"
#ifdef __GNUC__ #ifdef __GNUC__
...@@ -6447,7 +6463,7 @@ int main() { ...@@ -6447,7 +6463,7 @@ int main() {
char *p = (char *) alloca(1); char *p = (char *) alloca(1);
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:6451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:6467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
ac_cv_func_alloca_works=yes ac_cv_func_alloca_works=yes
else else
...@@ -6479,12 +6495,12 @@ EOF ...@@ -6479,12 +6495,12 @@ EOF
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
echo "configure:6483: checking whether alloca needs Cray hooks" >&5 echo "configure:6499: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6488 "configure" #line 6504 "configure"
#include "confdefs.h" #include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2) #if defined(CRAY) && ! defined(CRAY2)
webecray webecray
...@@ -6509,12 +6525,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 ...@@ -6509,12 +6525,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
if test $ac_cv_os_cray = yes; then if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:6513: checking for $ac_func" >&5 echo "configure:6529: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6518 "configure" #line 6534 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -6537,7 +6553,7 @@ $ac_func(); ...@@ -6537,7 +6553,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:6541: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:6557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -6564,7 +6580,7 @@ done ...@@ -6564,7 +6580,7 @@ done
fi fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
echo "configure:6568: checking stack direction for C alloca" >&5 echo "configure:6584: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -6572,7 +6588,7 @@ else ...@@ -6572,7 +6588,7 @@ else
ac_cv_c_stack_direction=0 ac_cv_c_stack_direction=0
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6576 "configure" #line 6592 "configure"
#include "confdefs.h" #include "confdefs.h"
find_stack_direction () find_stack_direction ()
{ {
...@@ -6591,7 +6607,7 @@ main () ...@@ -6591,7 +6607,7 @@ main ()
exit (find_stack_direction() < 0); exit (find_stack_direction() < 0);
} }
EOF EOF
if { (eval echo configure:6595: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:6611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_c_stack_direction=1 ac_cv_c_stack_direction=1
else else
...@@ -6616,17 +6632,17 @@ for ac_hdr in unistd.h ...@@ -6616,17 +6632,17 @@ for ac_hdr in unistd.h
do do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:6620: checking for $ac_hdr" >&5 echo "configure:6636: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6625 "configure" #line 6641 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <$ac_hdr> #include <$ac_hdr>
EOF EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:6630: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } { (eval echo configure:6646: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then if test -z "$ac_err"; then
rm -rf conftest* rm -rf conftest*
...@@ -6655,12 +6671,12 @@ done ...@@ -6655,12 +6671,12 @@ done
for ac_func in getpagesize for ac_func in getpagesize
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:6659: checking for $ac_func" >&5 echo "configure:6675: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6664 "configure" #line 6680 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -6683,7 +6699,7 @@ $ac_func(); ...@@ -6683,7 +6699,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:6687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:6703: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -6708,7 +6724,7 @@ fi ...@@ -6708,7 +6724,7 @@ fi
done done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
echo "configure:6712: checking for working mmap" >&5 echo "configure:6728: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -6716,7 +6732,7 @@ else ...@@ -6716,7 +6732,7 @@ else
ac_cv_func_mmap_fixed_mapped=no ac_cv_func_mmap_fixed_mapped=no
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6720 "configure" #line 6736 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test. /* Thanks to Mike Haertel and Jim Avera for this test.
...@@ -6856,7 +6872,7 @@ main() ...@@ -6856,7 +6872,7 @@ main()
} }
EOF EOF
if { (eval echo configure:6860: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:6876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_mmap_fixed_mapped=yes
else else
...@@ -6884,17 +6900,17 @@ unistd.h sys/param.h ...@@ -6884,17 +6900,17 @@ unistd.h sys/param.h
do do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:6888: checking for $ac_hdr" >&5 echo "configure:6904: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6893 "configure" #line 6909 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <$ac_hdr> #include <$ac_hdr>
EOF EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:6898: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } { (eval echo configure:6914: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then if test -z "$ac_err"; then
rm -rf conftest* rm -rf conftest*
...@@ -6924,12 +6940,12 @@ done ...@@ -6924,12 +6940,12 @@ done
strdup __argz_count __argz_stringify __argz_next strdup __argz_count __argz_stringify __argz_next
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:6928: checking for $ac_func" >&5 echo "configure:6944: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6933 "configure" #line 6949 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -6952,7 +6968,7 @@ $ac_func(); ...@@ -6952,7 +6968,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:6956: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:6972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -6981,12 +6997,12 @@ done ...@@ -6981,12 +6997,12 @@ done
for ac_func in stpcpy for ac_func in stpcpy
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:6985: checking for $ac_func" >&5 echo "configure:7001: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6990 "configure" #line 7006 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -7009,7 +7025,7 @@ $ac_func(); ...@@ -7009,7 +7025,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:7013: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:7029: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -7043,19 +7059,19 @@ EOF ...@@ -7043,19 +7059,19 @@ EOF
if test $ac_cv_header_locale_h = yes; then if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
echo "configure:7047: checking for LC_MESSAGES" >&5 echo "configure:7063: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 7052 "configure" #line 7068 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <locale.h> #include <locale.h>
int main() { int main() {
return LC_MESSAGES return LC_MESSAGES
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:7059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:7075: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
am_cv_val_LC_MESSAGES=yes am_cv_val_LC_MESSAGES=yes
else else
...@@ -7076,7 +7092,7 @@ EOF ...@@ -7076,7 +7092,7 @@ EOF
fi fi
fi fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
echo "configure:7080: checking whether NLS is requested" >&5 echo "configure:7096: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given. # Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then if test "${enable_nls+set}" = set; then
enableval="$enable_nls" enableval="$enable_nls"
...@@ -7096,7 +7112,7 @@ fi ...@@ -7096,7 +7112,7 @@ fi
EOF EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
echo "configure:7100: checking whether included gettext is requested" >&5 echo "configure:7116: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given. # Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext" withval="$with_included_gettext"
...@@ -7115,17 +7131,17 @@ fi ...@@ -7115,17 +7131,17 @@ fi
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
echo "configure:7119: checking for libintl.h" >&5 echo "configure:7135: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 7124 "configure" #line 7140 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <libintl.h> #include <libintl.h>
EOF EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:7129: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } { (eval echo configure:7145: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then if test -z "$ac_err"; then
rm -rf conftest* rm -rf conftest*
...@@ -7142,19 +7158,19 @@ fi ...@@ -7142,19 +7158,19 @@ fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6 echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
echo "configure:7146: checking for gettext in libc" >&5 echo "configure:7162: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 7151 "configure" #line 7167 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <libintl.h> #include <libintl.h>
int main() { int main() {
return (int) gettext ("") return (int) gettext ("")
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:7158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:7174: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
gt_cv_func_gettext_libc=yes gt_cv_func_gettext_libc=yes
else else
...@@ -7170,7 +7186,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 ...@@ -7170,7 +7186,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
if test "$gt_cv_func_gettext_libc" != "yes"; then if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
echo "configure:7174: checking for bindtextdomain in -lintl" >&5 echo "configure:7190: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -7178,7 +7194,7 @@ else ...@@ -7178,7 +7194,7 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS" LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 7182 "configure" #line 7198 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ /* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2 /* We use char because int might match the return type of a gcc2
...@@ -7189,7 +7205,7 @@ int main() { ...@@ -7189,7 +7205,7 @@ int main() {
bindtextdomain() bindtextdomain()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:7193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:7209: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -7205,12 +7221,12 @@ fi ...@@ -7205,12 +7221,12 @@ fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6 echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
echo "configure:7209: checking for gettext in libintl" >&5 echo "configure:7225: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6 echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
echo "configure:7214: checking for gettext in -lintl" >&5 echo "configure:7230: checking for gettext in -lintl" >&5
ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'` ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -7218,7 +7234,7 @@ else ...@@ -7218,7 +7234,7 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS" LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 7222 "configure" #line 7238 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ /* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2 /* We use char because int might match the return type of a gcc2
...@@ -7229,7 +7245,7 @@ int main() { ...@@ -7229,7 +7245,7 @@ int main() {
gettext() gettext()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:7233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:7249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -7268,7 +7284,7 @@ EOF ...@@ -7268,7 +7284,7 @@ EOF
# Extract the first word of "msgfmt", so it can be a program name with args. # Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2 set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7272: checking for $ac_word" >&5 echo "configure:7288: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -7302,12 +7318,12 @@ fi ...@@ -7302,12 +7318,12 @@ fi
for ac_func in dcgettext for ac_func in dcgettext
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:7306: checking for $ac_func" >&5 echo "configure:7322: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 7311 "configure" #line 7327 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -7330,7 +7346,7 @@ $ac_func(); ...@@ -7330,7 +7346,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:7334: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:7350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -7357,7 +7373,7 @@ done ...@@ -7357,7 +7373,7 @@ done
# Extract the first word of "gmsgfmt", so it can be a program name with args. # Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2 set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7361: checking for $ac_word" >&5 echo "configure:7377: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -7393,7 +7409,7 @@ fi ...@@ -7393,7 +7409,7 @@ fi
# Extract the first word of "xgettext", so it can be a program name with args. # Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2 set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7397: checking for $ac_word" >&5 echo "configure:7413: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -7425,7 +7441,7 @@ else ...@@ -7425,7 +7441,7 @@ else
fi fi
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 7429 "configure" #line 7445 "configure"
#include "confdefs.h" #include "confdefs.h"
int main() { int main() {
...@@ -7433,7 +7449,7 @@ extern int _nl_msg_cat_cntr; ...@@ -7433,7 +7449,7 @@ extern int _nl_msg_cat_cntr;
return _nl_msg_cat_cntr return _nl_msg_cat_cntr
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:7437: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:7453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
CATOBJEXT=.gmo CATOBJEXT=.gmo
DATADIRNAME=share DATADIRNAME=share
...@@ -7456,7 +7472,7 @@ fi ...@@ -7456,7 +7472,7 @@ fi
if test "$CATOBJEXT" = "NONE"; then if test "$CATOBJEXT" = "NONE"; then
echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6 echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
echo "configure:7460: checking whether catgets can be used" >&5 echo "configure:7476: checking whether catgets can be used" >&5
# Check whether --with-catgets or --without-catgets was given. # Check whether --with-catgets or --without-catgets was given.
if test "${with_catgets+set}" = set; then if test "${with_catgets+set}" = set; then
withval="$with_catgets" withval="$with_catgets"
...@@ -7469,7 +7485,7 @@ fi ...@@ -7469,7 +7485,7 @@ fi
if test "$nls_cv_use_catgets" = "yes"; then if test "$nls_cv_use_catgets" = "yes"; then
echo $ac_n "checking for main in -li""... $ac_c" 1>&6 echo $ac_n "checking for main in -li""... $ac_c" 1>&6
echo "configure:7473: checking for main in -li" >&5 echo "configure:7489: checking for main in -li" >&5
ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'` ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -7477,14 +7493,14 @@ else ...@@ -7477,14 +7493,14 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-li $LIBS" LIBS="-li $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 7481 "configure" #line 7497 "configure"
#include "confdefs.h" #include "confdefs.h"
int main() { int main() {
main() main()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:7488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:7504: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -7512,12 +7528,12 @@ else ...@@ -7512,12 +7528,12 @@ else
fi fi
echo $ac_n "checking for catgets""... $ac_c" 1>&6 echo $ac_n "checking for catgets""... $ac_c" 1>&6
echo "configure:7516: checking for catgets" >&5 echo "configure:7532: checking for catgets" >&5
if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 7521 "configure" #line 7537 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char catgets(); below. */ which can conflict with char catgets(); below. */
...@@ -7540,7 +7556,7 @@ catgets(); ...@@ -7540,7 +7556,7 @@ catgets();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:7544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:7560: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_catgets=yes" eval "ac_cv_func_catgets=yes"
else else
...@@ -7562,7 +7578,7 @@ EOF ...@@ -7562,7 +7578,7 @@ EOF
# Extract the first word of "gencat", so it can be a program name with args. # Extract the first word of "gencat", so it can be a program name with args.
set dummy gencat; ac_word=$2 set dummy gencat; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7566: checking for $ac_word" >&5 echo "configure:7582: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -7598,7 +7614,7 @@ fi ...@@ -7598,7 +7614,7 @@ fi
# Extract the first word of "gmsgfmt", so it can be a program name with args. # Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2 set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7602: checking for $ac_word" >&5 echo "configure:7618: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -7635,7 +7651,7 @@ fi ...@@ -7635,7 +7651,7 @@ fi
# Extract the first word of "msgfmt", so it can be a program name with args. # Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2 set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7639: checking for $ac_word" >&5 echo "configure:7655: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -7670,7 +7686,7 @@ fi ...@@ -7670,7 +7686,7 @@ fi
# Extract the first word of "xgettext", so it can be a program name with args. # Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2 set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7674: checking for $ac_word" >&5 echo "configure:7690: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -7728,7 +7744,7 @@ fi ...@@ -7728,7 +7744,7 @@ fi
# Extract the first word of "msgfmt", so it can be a program name with args. # Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2 set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7732: checking for $ac_word" >&5 echo "configure:7748: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -7762,7 +7778,7 @@ fi ...@@ -7762,7 +7778,7 @@ fi
# Extract the first word of "gmsgfmt", so it can be a program name with args. # Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2 set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7766: checking for $ac_word" >&5 echo "configure:7782: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -7798,7 +7814,7 @@ fi ...@@ -7798,7 +7814,7 @@ fi
# Extract the first word of "xgettext", so it can be a program name with args. # Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2 set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7802: checking for $ac_word" >&5 echo "configure:7818: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -7891,7 +7907,7 @@ fi ...@@ -7891,7 +7907,7 @@ fi
LINGUAS= LINGUAS=
else else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
echo "configure:7895: checking for catalogs to be installed" >&5 echo "configure:7911: checking for catalogs to be installed" >&5
NEW_LINGUAS= NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in case "$ALL_LINGUAS" in
...@@ -7919,17 +7935,17 @@ echo "configure:7895: checking for catalogs to be installed" >&5 ...@@ -7919,17 +7935,17 @@ echo "configure:7895: checking for catalogs to be installed" >&5
if test "$CATOBJEXT" = ".cat"; then if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
echo "configure:7923: checking for linux/version.h" >&5 echo "configure:7939: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 7928 "configure" #line 7944 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <linux/version.h> #include <linux/version.h>
EOF EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:7933: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } { (eval echo configure:7949: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then if test -z "$ac_err"; then
rm -rf conftest* rm -rf conftest*
...@@ -8163,7 +8179,7 @@ fi ...@@ -8163,7 +8179,7 @@ fi
# Figure out what assembler alignment features are present. # Figure out what assembler alignment features are present.
echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6 echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
echo "configure:8167: checking assembler alignment features" >&5 echo "configure:8183: checking assembler alignment features" >&5
gcc_cv_as= gcc_cv_as=
gcc_cv_as_alignment_features= gcc_cv_as_alignment_features=
gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
...@@ -8284,7 +8300,7 @@ fi ...@@ -8284,7 +8300,7 @@ fi
echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6 echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6 echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
echo "configure:8288: checking assembler subsection support" >&5 echo "configure:8304: checking assembler subsection support" >&5
gcc_cv_as_subsections= gcc_cv_as_subsections=
if test x$gcc_cv_as != x; then if test x$gcc_cv_as != x; then
# Check if we have .subsection # Check if we have .subsection
...@@ -8326,7 +8342,7 @@ echo "$ac_t""$gcc_cv_as_subsections" 1>&6 ...@@ -8326,7 +8342,7 @@ echo "$ac_t""$gcc_cv_as_subsections" 1>&6
case "$target" in case "$target" in
sparc*-*-*) sparc*-*-*)
echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6 echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
echo "configure:8330: checking assembler .register pseudo-op support" >&5 echo "configure:8346: checking assembler .register pseudo-op support" >&5
gcc_cv_as_register_pseudo_op= gcc_cv_as_register_pseudo_op=
if test x$gcc_cv_as != x; then if test x$gcc_cv_as != x; then
# Check if we have .register # Check if we have .register
...@@ -8343,7 +8359,7 @@ EOF ...@@ -8343,7 +8359,7 @@ EOF
echo "$ac_t""$gcc_cv_as_register_pseudo_op" 1>&6 echo "$ac_t""$gcc_cv_as_register_pseudo_op" 1>&6
echo $ac_n "checking assembler offsetable %lo() support""... $ac_c" 1>&6 echo $ac_n "checking assembler offsetable %lo() support""... $ac_c" 1>&6
echo "configure:8347: checking assembler offsetable %lo() support" >&5 echo "configure:8363: checking assembler offsetable %lo() support" >&5
gcc_cv_as_offsetable_lo10= gcc_cv_as_offsetable_lo10=
if test x$gcc_cv_as != x; then if test x$gcc_cv_as != x; then
# Check if assembler has offsetable %lo() # Check if assembler has offsetable %lo()
...@@ -8376,7 +8392,7 @@ EOF ...@@ -8376,7 +8392,7 @@ EOF
i[34567]86-*-*) i[34567]86-*-*)
echo $ac_n "checking assembler instructions""... $ac_c" 1>&6 echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
echo "configure:8380: checking assembler instructions" >&5 echo "configure:8396: checking assembler instructions" >&5
gcc_cv_as_instructions= gcc_cv_as_instructions=
if test x$gcc_cv_as != x; then if test x$gcc_cv_as != x; then
set "filds fists" "filds mem; fists mem" set "filds fists" "filds mem; fists mem"
......
gcc/configure.in
...@@ -756,15 +756,31 @@ changequote([,])dnl ...@@ -756,15 +756,31 @@ changequote([,])dnl
tmake_file=arm/t-linux tmake_file=arm/t-linux
gnu_ld=yes gnu_ld=yes
;; ;;
arm*-*-linux-gnu*) # ARM GNU/Linux with ELF arm*-*-linux-gnuoldld*) # ARM GNU/Linux with old ELF linker
xm_file=arm/xm-linux.h xm_file=arm/xm-linux.h
xmake_file=x-linux xmake_file=x-linux
tm_file="arm/linux-oldld.h arm/linux-elf.h"
case $machine in case $machine in
armv2*-*-*) armv2*-*-*)
tm_file=arm/linux-elf26.h tm_file="arm/linux-elf26.h $tm_file"
;; ;;
*) esac
tm_file=arm/linux-elf.h tmake_file="t-linux arm/t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
case x${enable_threads} in
x | xyes | xpthreads | xposix)
thread_file='posix'
;;
esac
;;
arm*-*-linux-gnu*) # ARM GNU/Linux with ELF
xm_file=arm/xm-linux.h
xmake_file=x-linux
tm_file="arm/linux-elf.h"
case $machine in
armv2*-*-*)
tm_file="arm/linux-elf26.h $tm_file"
;; ;;
esac esac
tmake_file="t-linux arm/t-linux" tmake_file="t-linux arm/t-linux"
......
gcc/install.texi
...@@ -914,12 +914,23 @@ produce @file{a.out} format object modules. ...@@ -914,12 +914,23 @@ produce @file{a.out} format object modules.
You may need to make a variant of the file @file{arm.h} for your particular You may need to make a variant of the file @file{arm.h} for your particular
configuration. configuration.
@item arm-*-linuxaout @item arm-*-elf
Any of the ARM family processors running the Linux-based GNU system with This configuration is intended for embedded systems.
the @file{a.out} binary format (ELF is not yet supported). You must use
version 2.8.1.0.7 or later of the GNU/Linux binutils, which you can download @item arm-*-linux-gnuaout
from @file{sunsite.unc.edu:/pub/Linux/GCC} and other mirror sites for Any of the ARM-family processors running the Linux-based GNU system with
Linux-based GNU systems. the @file{a.out} binary format. This is an obsolete configuration.
@item arm-*-linux-gnu
@itemx arm-*-linux-gnuoldld
Any of the ARM-family processors running the Linux-based GNU system with
the @file{ELF} binary format. You must use version 2.9.1.0.22 or later
of the GNU/Linux binutils, which you can download from
@file{ftp.varesearch.com:/pub/support/hjl/binutils}.
These two configurations differ only in the required version of GNU
binutils. For binutils 2.9.1.0.x, use @samp{arm-*-linux-gnuoldld}. For
newer versions of binutils, use @samp{arm-*-linux-gnu}.
@item arm-*-riscix @item arm-*-riscix
The ARM2 or ARM3 processor running RISC iX, Acorn's port of BSD Unix. The ARM2 or ARM3 processor running RISC iX, Acorn's port of BSD Unix.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment