// Copyright 2018 ETH Zurich and University of Bologna. // Copyright and related rights are licensed under the Solderpad Hardware // License, Version 0.51 (the "License"); you may not use this file except in // compliance with the License. You may obtain a copy of the License at // http://solderpad.org/licenses/SHL-0.51. Unless required by applicable law // or agreed to in writing, software, hardware and materials distributed under // this License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR // CONDITIONS OF ANY KIND, either express or implied. See the License for the // specific language governing permissions and limitations under the License. // Stream arbiter: Arbitrates a parametrizable number of input streams (i.e., valid-ready // handshaking with dependency rules as in AXI4) to a single output stream. Once `oup_valid_o` is // asserted, `oup_data_o` remains invariant until the output handshake has occurred. The // arbitration scheme is round-robin with "look ahead", see the `rrarbiter` for details. module stream_arbiter #( parameter type DATA_T = logic, // Vivado requires a default value for type parameters. parameter integer N_INP = -1, // Synopsys DC requires a default value for parameters. parameter ARBITER = "rr" // "rr" or "prio" ) ( input logic clk_i, input logic rst_ni, input DATA_T [N_INP-1:0] inp_data_i, input logic [N_INP-1:0] inp_valid_i, output logic [N_INP-1:0] inp_ready_o, output DATA_T oup_data_o, output logic oup_valid_o, input logic oup_ready_i ); stream_arbiter_flushable #( .DATA_T (DATA_T), .N_INP (N_INP), .ARBITER (ARBITER) ) i_arb ( .clk_i (clk_i), .rst_ni (rst_ni), .flush_i (1'b0), .inp_data_i (inp_data_i), .inp_valid_i (inp_valid_i), .inp_ready_o (inp_ready_o), .oup_data_o (oup_data_o), .oup_valid_o (oup_valid_o), .oup_ready_i (oup_ready_i) ); endmodule