// ================================================================
// NVDLA Open Source Project
//
// Copyright(c) 2016 - 2017 NVIDIA Corporation. Licensed under the
// NVDLA Open Hardware License; Check "LICENSE" which comes with
// this distribution for more information.
// ================================================================
// File Name: NV_NVDLA_RUBIK_intr.v
module NV_NVDLA_RUBIK_intr (
   nvdla_core_clk //|< i
  ,nvdla_core_rstn //|< i
  ,dp2reg_consumer //|< i
  ,dp2reg_done //|< i
  ,pwrbus_ram_pd //|< i
  ,reg2dp_op_en //|< i
  ,wr_rsp_complete //|< i
  ,rubik2glb_done_intr_pd //|> o
  );
input nvdla_core_clk;
input nvdla_core_rstn;
input dp2reg_consumer;
input dp2reg_done;
input [31:0] pwrbus_ram_pd;
input reg2dp_op_en;
input wr_rsp_complete;
output [1:0] rubik2glb_done_intr_pd;
reg [1:0] rubik2glb_done_intr_pd;
wire layer0_done;
wire layer1_done;
wire op_done_rd_pd;
wire op_done_rd_prdy;
wire op_done_rd_pvld;
wire op_done_wr_pd;
wire op_done_wr_pvld;
wire [1:0] rubik_done_intr_w;
// synoff nets
// monitor nets
// debug nets
// tie high nets
// tie low nets
// no connect nets
// not all bits used nets
// todo nets
//&Always posedge;
// if (dp2reg_done)
// dp2reg_done_flg <0= ~dp2reg_done_flg;
//&End;
assign op_done_wr_pvld = reg2dp_op_en & dp2reg_done;
assign op_done_wr_pd = dp2reg_consumer;
assign op_done_rd_prdy = wr_rsp_complete;
NV_NVDLA_RUBIK_opdone_fifo rbk_opdone_fifo (
   .nvdla_core_clk (nvdla_core_clk) //|< i
  ,.nvdla_core_rstn (nvdla_core_rstn) //|< i
  ,.op_done_wr_prdy () //|> ?
  ,.op_done_wr_pvld (op_done_wr_pvld) //|< w
  ,.op_done_wr_pd (op_done_wr_pd) //|< w
  ,.op_done_rd_prdy (op_done_rd_prdy) //|< w
  ,.op_done_rd_pvld (op_done_rd_pvld) //|> w
  ,.op_done_rd_pd (op_done_rd_pd) //|> w
  ,.pwrbus_ram_pd (pwrbus_ram_pd[31:0]) //|< i
  );
assign layer0_done = op_done_rd_pvld & op_done_rd_prdy & !op_done_rd_pd;
assign layer1_done = op_done_rd_pvld & op_done_rd_prdy & op_done_rd_pd;
//Write done interrupt
assign rubik_done_intr_w[0] = wr_rsp_complete & layer0_done; //~dp2reg_consumer;
assign rubik_done_intr_w[1] = wr_rsp_complete & layer1_done; //dp2reg_consumer;
always @(posedge nvdla_core_clk or negedge nvdla_core_rstn) begin
  if (!nvdla_core_rstn) begin
    rubik2glb_done_intr_pd[1:0] <= {2{1'b0}};
  end else begin
  rubik2glb_done_intr_pd[1:0] <= rubik_done_intr_w;
  end
end
endmodule // NV_NVDLA_RUBIK_intr
//
// AUTOMATICALLY GENERATED -- DO NOT EDIT OR CHECK IN
//
// /home/nvtools/engr/2017/03/11_05_00_06/nvtools/scripts/fifogen
// fifogen -input_config_yaml ../../../../../../../socd/ip_chip_tools/1.0/defs/public/fifogen/golden/tlit5/fifogen.yml -no_make_ram -no_make_ram -stdout -m NV_NVDLA_RUBIK_opdone_fifo -clk_name nvdla_core_clk -reset_name nvdla_core_rstn -wr_pipebus op_done_wr -rd_pipebus op_done_rd -d 4 -w 1 -rd_reg -ram ff [Chosen ram type: ff - fifogen_flops (user specified, thus no other ram type is allowed)]
// chip config vars: assertion_module_prefix=nv_ strict_synchronizers=1 strict_synchronizers_use_lib_cells=1 strict_synchronizers_use_tm_lib_cells=1 strict_sync_randomizer=1 assertion_message_prefix=FIFOGEN_ASSERTION allow_async_fifola=0 ignore_ramgen_fifola_variant=1 uses_p_SSYNC=0 uses_prand=1 uses_rammake_inc=1 use_x_or_0=1 force_wr_reg_gated=1 no_force_reset=1 no_timescale=1 no_pli_ifdef=1 requires_full_throughput=1 ram_auto_ff_bits_cutoff=16 ram_auto_ff_width_cutoff=2 ram_auto_ff_width_cutoff_max_depth=32 ram_auto_ff_depth_cutoff=-1 ram_auto_ff_no_la2_depth_cutoff=5 ram_auto_la2_width_cutoff=8 ram_auto_la2_width_cutoff_max_depth=56 ram_auto_la2_depth_cutoff=16 flopram_emu_model=1 dslp_single_clamp_port=1 dslp_clamp_port=1 slp_single_clamp_port=1 slp_clamp_port=1 master_clk_gated=1 clk_gate_module=NV_CLK_gate_power redundant_timing_flops=0 hot_reset_async_force_ports_and_loopback=1 ram_sleep_en_width=1 async_cdc_reg_id=NV_AFIFO_ rd_reg_default_for_async=1 async_ram_instance_prefix=NV_ASYNC_RAM_ allow_rd_busy_reg_warning=0 do_dft_xelim_gating=1 add_dft_xelim_wr_clkgate=1 add_dft_xelim_rd_clkgate=1
//
// leda B_3208_NV OFF -- Unequal length LHS and RHS in assignment
// leda B_1405 OFF -- 2 asynchronous resets in this unit detected
`define FORCE_CONTENTION_ASSERTION_RESET_ACTIVE 1'b1
`include "simulate_x_tick.vh"
module NV_NVDLA_RUBIK_opdone_fifo (
      nvdla_core_clk
    , nvdla_core_rstn
    , op_done_wr_prdy
    , op_done_wr_pvld
`ifdef FV_RAND_WR_PAUSE
    , op_done_wr_pause
`endif
    , op_done_wr_pd
    , op_done_rd_prdy
    , op_done_rd_pvld
    , op_done_rd_pd
    , pwrbus_ram_pd
    );
// spyglass disable_block W401 -- clock is not input to module
input nvdla_core_clk;
input nvdla_core_rstn;
output op_done_wr_prdy;
input op_done_wr_pvld;
`ifdef FV_RAND_WR_PAUSE
input op_done_wr_pause;
`endif
input op_done_wr_pd;
input op_done_rd_prdy;
output op_done_rd_pvld;
output op_done_rd_pd;
input [31:0] pwrbus_ram_pd;
// Master Clock Gating (SLCG)
//
// We gate the clock(s) when idle or stalled.
// This allows us to turn off numerous miscellaneous flops
// that don't get gated during synthesis for one reason or another.
//
// We gate write side and read side separately.
// If the fifo is synchronous, we also gate the ram separately, but if
// -master_clk_gated_unified or -status_reg/-status_logic_reg is specified,
// then we use one clk gate for write, ram, and read.
//
wire nvdla_core_clk_mgated_enable; // assigned by code at end of this module
wire nvdla_core_clk_mgated; // used only in synchronous fifos
NV_CLK_gate_power nvdla_core_clk_mgate( .clk(nvdla_core_clk), .reset_(nvdla_core_rstn), .clk_en(nvdla_core_clk_mgated_enable), .clk_gated(nvdla_core_clk_mgated) );
//
// WRITE SIDE
//
// synopsys translate_off
`ifndef SYNTH_LEVEL1_COMPILE
`ifndef SYNTHESIS
wire wr_pause_rand; // random stalling
`endif
`endif
// synopsys translate_on
wire wr_reserving;
reg op_done_wr_busy_int; // copy for internal use
assign op_done_wr_prdy = !op_done_wr_busy_int;
assign wr_reserving = op_done_wr_pvld && !op_done_wr_busy_int; // reserving write space?
reg wr_popping; // fwd: write side sees pop?
reg [2:0] op_done_wr_count; // write-side count
wire [2:0] wr_count_next_wr_popping = wr_reserving ? op_done_wr_count : (op_done_wr_count - 1'd1); // spyglass disable W164a W484
wire [2:0] wr_count_next_no_wr_popping = wr_reserving ? (op_done_wr_count + 1'd1) : op_done_wr_count; // spyglass disable W164a W484
wire [2:0] wr_count_next = wr_popping ? wr_count_next_wr_popping :
                                               wr_count_next_no_wr_popping;
wire wr_count_next_no_wr_popping_is_4 = ( wr_count_next_no_wr_popping == 3'd4 );
wire wr_count_next_is_4 = wr_popping ? 1'b0 :
                                          wr_count_next_no_wr_popping_is_4;
wire [2:0] wr_limit_muxed; // muxed with simulation/emulation overrides
wire [2:0] wr_limit_reg = wr_limit_muxed;
`ifdef FV_RAND_WR_PAUSE
// VCS coverage off
wire op_done_wr_busy_next = wr_count_next_is_4 || // busy next cycle?
                          (wr_limit_reg != 3'd0 && // check op_done_wr_limit if != 0
                           wr_count_next >= wr_limit_reg) || op_done_wr_pause;
// VCS coverage on
`else
// VCS coverage off
wire op_done_wr_busy_next = wr_count_next_is_4 || // busy next cycle?
                          (wr_limit_reg != 3'd0 && // check op_done_wr_limit if != 0
                           wr_count_next >= wr_limit_reg)
// synopsys translate_off
  `ifndef SYNTH_LEVEL1_COMPILE
  `ifndef SYNTHESIS
 || wr_pause_rand
  `endif
  `endif
// synopsys translate_on
;
// VCS coverage on
`endif
always @( posedge nvdla_core_clk_mgated or negedge nvdla_core_rstn ) begin
    if ( !nvdla_core_rstn ) begin
        op_done_wr_busy_int <= 1'b0;
        op_done_wr_count <= 3'd0;
    end else begin
 op_done_wr_busy_int <= op_done_wr_busy_next;
 if ( wr_reserving ^ wr_popping ) begin
     op_done_wr_count <= wr_count_next;
        end
//synopsys translate_off
            else if ( !(wr_reserving ^ wr_popping) ) begin
        end else begin
            op_done_wr_count <= {3{`x_or_0}};
        end
//synopsys translate_on
    end
end
wire wr_pushing = wr_reserving; // data pushed same cycle as op_done_wr_pvld
//
// RAM
//
reg [1:0] op_done_wr_adr; // current write address
// spyglass disable_block W484
always @( posedge nvdla_core_clk_mgated or negedge nvdla_core_rstn ) begin
    if ( !nvdla_core_rstn ) begin
        op_done_wr_adr <= 2'd0;
    end else begin
        if ( wr_pushing ) begin
     op_done_wr_adr <= op_done_wr_adr + 1'd1;
        end
    end
end
// spyglass enable_block W484
reg [1:0] op_done_rd_adr; // read address this cycle
wire ram_we = wr_pushing; // note: write occurs next cycle
wire op_done_rd_pd_p; // read data out of ram
wire [31 : 0] pwrbus_ram_pd;
// Adding parameter for fifogen to disable wr/rd contention assertion in ramgen.
// Fifogen handles this by ignoring the data on the ram data out for that cycle.
NV_NVDLA_RUBIK_opdone_fifo_flopram_rwsa_4x1 ram (
      .clk( nvdla_core_clk_mgated )
    , .pwrbus_ram_pd ( pwrbus_ram_pd )
    , .di ( op_done_wr_pd )
    , .we ( ram_we )
    , .wa ( op_done_wr_adr )
    , .ra ( op_done_rd_adr )
    , .dout ( op_done_rd_pd_p )
    );
wire rd_popping; // read side doing pop this cycle?
wire [1:0] rd_adr_next_popping = op_done_rd_adr + 1'd1; // spyglass disable W484
always @( posedge nvdla_core_clk_mgated or negedge nvdla_core_rstn ) begin
    if ( !nvdla_core_rstn ) begin
        op_done_rd_adr <= 2'd0;
    end else begin
        if ( rd_popping ) begin
     op_done_rd_adr <= rd_adr_next_popping;
        end
//synopsys translate_off
            else if ( !rd_popping ) begin
        end else begin
            op_done_rd_adr <= {2{`x_or_0}};
        end
//synopsys translate_on
    end
end
//
// SYNCHRONOUS BOUNDARY
//
always @( posedge nvdla_core_clk_mgated or negedge nvdla_core_rstn ) begin
    if ( !nvdla_core_rstn ) begin
        wr_popping <= 1'b0;
    end else begin
 wr_popping <= rd_popping;
    end
end
wire rd_pushing = wr_pushing; // let it be seen immediately
//
// READ SIDE
//
reg op_done_rd_pvld_p; // data out of fifo is valid
reg op_done_rd_pvld_int; // internal copy of op_done_rd_pvld
assign op_done_rd_pvld = op_done_rd_pvld_int;
assign rd_popping = op_done_rd_pvld_p && !(op_done_rd_pvld_int && !op_done_rd_prdy);
reg [2:0] op_done_rd_count_p; // read-side fifo count
// spyglass disable_block W164a W484
wire [2:0] rd_count_p_next_rd_popping = rd_pushing ? op_done_rd_count_p :
                                                                (op_done_rd_count_p - 1'd1);
wire [2:0] rd_count_p_next_no_rd_popping = rd_pushing ? (op_done_rd_count_p + 1'd1) :
                                                                    op_done_rd_count_p;
// spyglass enable_block W164a W484
wire [2:0] rd_count_p_next = rd_popping ? rd_count_p_next_rd_popping :
                                                     rd_count_p_next_no_rd_popping;
wire rd_count_p_next_rd_popping_not_0 = rd_count_p_next_rd_popping != 0;
wire rd_count_p_next_no_rd_popping_not_0 = rd_count_p_next_no_rd_popping != 0;
wire rd_count_p_next_not_0 = rd_popping ? rd_count_p_next_rd_popping_not_0 :
                                              rd_count_p_next_no_rd_popping_not_0;
always @( posedge nvdla_core_clk_mgated or negedge nvdla_core_rstn ) begin
    if ( !nvdla_core_rstn ) begin
        op_done_rd_count_p <= 3'd0;
        op_done_rd_pvld_p <= 1'b0;
    end else begin
        if ( rd_pushing || rd_popping ) begin
     op_done_rd_count_p <= rd_count_p_next;
        end
//synopsys translate_off
            else if ( !(rd_pushing || rd_popping ) ) begin
        end else begin
            op_done_rd_count_p <= {3{`x_or_0}};
        end
//synopsys translate_on
        if ( rd_pushing || rd_popping ) begin
     op_done_rd_pvld_p <= (rd_count_p_next_not_0);
        end
//synopsys translate_off
            else if ( !(rd_pushing || rd_popping ) ) begin
        end else begin
            op_done_rd_pvld_p <= `x_or_0;
        end
//synopsys translate_on
    end
end
reg op_done_rd_pd; // output data register
wire rd_req_next = (op_done_rd_pvld_p || (op_done_rd_pvld_int && !op_done_rd_prdy)) ;
always @( posedge nvdla_core_clk_mgated or negedge nvdla_core_rstn ) begin
    if ( !nvdla_core_rstn ) begin
        op_done_rd_pvld_int <= 1'b0;
    end else begin
        op_done_rd_pvld_int <= rd_req_next;
    end
end
always @( posedge nvdla_core_clk_mgated ) begin
    if ( (rd_popping) ) begin
        op_done_rd_pd <= op_done_rd_pd_p;
    end
//synopsys translate_off
        else if ( !((rd_popping)) ) begin
    end else begin
        op_done_rd_pd <= {1{`x_or_0}};
    end
//synopsys translate_on
end
// Master Clock Gating (SLCG) Enables
//
// plusarg for disabling this stuff:
// synopsys translate_off
`ifndef SYNTH_LEVEL1_COMPILE
`ifndef SYNTHESIS
reg master_clk_gating_disabled; initial master_clk_gating_disabled = $test$plusargs( "fifogen_disable_master_clk_gating" ) != 0;
`endif
`endif
// synopsys translate_on
// synopsys translate_off
`ifndef SYNTH_LEVEL1_COMPILE
`ifndef SYNTHESIS
reg wr_pause_rand_dly;
always @( posedge nvdla_core_clk or negedge nvdla_core_rstn ) begin
    if ( !nvdla_core_rstn ) begin
        wr_pause_rand_dly <= 1'b0;
    end else begin
        wr_pause_rand_dly <= wr_pause_rand;
    end
end
`endif
`endif
// synopsys translate_on
assign nvdla_core_clk_mgated_enable = ((wr_reserving || wr_pushing || rd_popping || wr_popping || (op_done_wr_pvld && !op_done_wr_busy_int) || (op_done_wr_busy_int != op_done_wr_busy_next)) || (rd_pushing || rd_popping || (op_done_rd_pvld_int && op_done_rd_prdy)) || (wr_pushing))
                               `ifdef FIFOGEN_MASTER_CLK_GATING_DISABLED
                               || 1'b1
                               `endif
// synopsys translate_off
          `ifndef SYNTH_LEVEL1_COMPILE
          `ifndef SYNTHESIS
                               || master_clk_gating_disabled || (wr_pause_rand != wr_pause_rand_dly)
          `endif
          `endif
// synopsys translate_on
                               ;
// Simulation and Emulation Overrides of wr_limit(s)
//
`ifdef EMU
`ifdef EMU_FIFO_CFG
// Emulation Global Config Override
//
assign wr_limit_muxed = `EMU_FIFO_CFG.NV_NVDLA_RUBIK_opdone_fifo_wr_limit_override ? `EMU_FIFO_CFG.NV_NVDLA_RUBIK_opdone_fifo_wr_limit : 3'd0;
`else
// No Global Override for Emulation
//
assign wr_limit_muxed = 3'd0;
`endif // EMU_FIFO_CFG
`else // !EMU
`ifdef SYNTH_LEVEL1_COMPILE
// No Override for GCS Compiles
//
assign wr_limit_muxed = 3'd0;
`else
`ifdef SYNTHESIS
// No Override for RTL Synthesis
//
assign wr_limit_muxed = 3'd0;
`else
// RTL Simulation Plusarg Override
// VCS coverage off
reg wr_limit_override;
reg [2:0] wr_limit_override_value;
assign wr_limit_muxed = wr_limit_override ? wr_limit_override_value : 3'd0;
`ifdef NV_ARCHPRO
event reinit;
initial begin
    $display("fifogen reinit initial block %m");
    -> reinit;
end
`endif
`ifdef NV_ARCHPRO
always @( reinit ) begin
`else
initial begin
`endif
    wr_limit_override = 0;
    wr_limit_override_value = 0; // to keep viva happy with dangles
    if ( $test$plusargs( "NV_NVDLA_RUBIK_opdone_fifo_wr_limit" ) ) begin
        wr_limit_override = 1;
        $value$plusargs( "NV_NVDLA_RUBIK_opdone_fifo_wr_limit=%d", wr_limit_override_value);
    end
end
// VCS coverage on
`endif
`endif
`endif
// Random Write-Side Stalling
// synopsys translate_off
`ifndef SYNTH_LEVEL1_COMPILE
`ifndef SYNTHESIS
// VCS coverage off
// leda W339 OFF -- Non synthesizable operator
// leda W372 OFF -- Undefined PLI task
// leda W373 OFF -- Undefined PLI function
// leda W599 OFF -- This construct is not supported by Synopsys
// leda W430 OFF -- Initial statement is not synthesizable
// leda W182 OFF -- Illegal statement for synthesis
// leda W639 OFF -- For synthesis, operands of a division or modulo operation need to be constants
// leda DCVER_274_NV OFF -- This system task is not supported by DC
integer stall_probability; // prob of stalling
integer stall_cycles_min; // min cycles to stall
integer stall_cycles_max; // max cycles to stall
integer stall_cycles_left; // stall cycles left
`ifdef NV_ARCHPRO
always @( reinit ) begin
`else
initial begin
`endif
    stall_probability = 0; // no stalling by default
    stall_cycles_min = 1;
    stall_cycles_max = 10;
`ifdef NO_PLI
`else
    if ( $test$plusargs( "NV_NVDLA_RUBIK_opdone_fifo_fifo_stall_probability" ) ) begin
        $value$plusargs( "NV_NVDLA_RUBIK_opdone_fifo_fifo_stall_probability=%d", stall_probability);
    end else if ( $test$plusargs( "default_fifo_stall_probability" ) ) begin
        $value$plusargs( "default_fifo_stall_probability=%d", stall_probability);
    end
    if ( $test$plusargs( "NV_NVDLA_RUBIK_opdone_fifo_fifo_stall_cycles_min" ) ) begin
        $value$plusargs( "NV_NVDLA_RUBIK_opdone_fifo_fifo_stall_cycles_min=%d", stall_cycles_min);
    end else if ( $test$plusargs( "default_fifo_stall_cycles_min" ) ) begin
        $value$plusargs( "default_fifo_stall_cycles_min=%d", stall_cycles_min);
    end
    if ( $test$plusargs( "NV_NVDLA_RUBIK_opdone_fifo_fifo_stall_cycles_max" ) ) begin
        $value$plusargs( "NV_NVDLA_RUBIK_opdone_fifo_fifo_stall_cycles_max=%d", stall_cycles_max);
    end else if ( $test$plusargs( "default_fifo_stall_cycles_max" ) ) begin
        $value$plusargs( "default_fifo_stall_cycles_max=%d", stall_cycles_max);
    end
`endif
    if ( stall_cycles_min < 1 ) begin
        stall_cycles_min = 1;
    end
    if ( stall_cycles_min > stall_cycles_max ) begin
        stall_cycles_max = stall_cycles_min;
    end
end
`ifdef NO_PLI
`else
// randomization globals
`ifdef SIMTOP_RANDOMIZE_STALLS
  always @( `SIMTOP_RANDOMIZE_STALLS.global_stall_event ) begin
    if ( ! $test$plusargs( "NV_NVDLA_RUBIK_opdone_fifo_fifo_stall_probability" ) ) stall_probability = `SIMTOP_RANDOMIZE_STALLS.global_stall_fifo_probability;
    if ( ! $test$plusargs( "NV_NVDLA_RUBIK_opdone_fifo_fifo_stall_cycles_min" ) ) stall_cycles_min = `SIMTOP_RANDOMIZE_STALLS.global_stall_fifo_cycles_min;
    if ( ! $test$plusargs( "NV_NVDLA_RUBIK_opdone_fifo_fifo_stall_cycles_max" ) ) stall_cycles_max = `SIMTOP_RANDOMIZE_STALLS.global_stall_fifo_cycles_max;
  end
`endif
`endif
always @( negedge nvdla_core_clk or negedge nvdla_core_rstn ) begin
    if ( !nvdla_core_rstn ) begin
        stall_cycles_left <= 0;
    end else begin
`ifdef NO_PLI
            stall_cycles_left <= 0;
`else
            if ( op_done_wr_pvld && !(!op_done_wr_prdy)
                 && stall_probability != 0 ) begin
                if ( prand_inst0(1, 100) <= stall_probability ) begin
                    stall_cycles_left <= prand_inst1(stall_cycles_min, stall_cycles_max);
                end else if ( stall_cycles_left !== 0 ) begin
                    stall_cycles_left <= stall_cycles_left - 1;
                end
            end else if ( stall_cycles_left !== 0 ) begin
                stall_cycles_left <= stall_cycles_left - 1;
            end
`endif
    end
end
assign wr_pause_rand = (stall_cycles_left !== 0) ;
// VCS coverage on
`endif
`endif
// synopsys translate_on
// VCS coverage on
// leda W339 ON
// leda W372 ON
// leda W373 ON
// leda W599 ON
// leda W430 ON
// leda W182 ON
// leda W639 ON
// leda DCVER_274_NV ON
//
// Histogram of fifo depth (from write side's perspective)
//
// NOTE: it will reference `SIMTOP.perfmon_enabled, so that
// has to at least be defined, though not initialized.
// tbgen testbenches have it already and various
// ways to turn it on and off.
//
`ifdef PERFMON_HISTOGRAM
// synopsys translate_off
`ifndef SYNTH_LEVEL1_COMPILE
`ifndef SYNTHESIS
perfmon_histogram perfmon (
      .clk ( nvdla_core_clk )
    , .max ( {29'd0, (wr_limit_reg == 3'd0) ? 3'd4 : wr_limit_reg} )
    , .curr ( {29'd0, op_done_wr_count} )
    );
`endif
`endif
// synopsys translate_on
`endif
// spyglass disable_block W164a W164b W116 W484 W504
`ifdef SPYGLASS
`else
`ifdef FV_ASSERT_ON
`else
// synopsys translate_off
`endif
`ifdef ASSERT_ON
`ifdef SPYGLASS
wire disable_assert_plusarg = 1'b0;
`else
`ifdef FV_ASSERT_ON
wire disable_assert_plusarg = 1'b0;
`else
wire disable_assert_plusarg = $test$plusargs("DISABLE_NESS_FLOW_ASSERTIONS");
`endif
`endif
wire assert_enabled = 1'b1 && !disable_assert_plusarg;
`endif
`ifdef FV_ASSERT_ON
`else
// synopsys translate_on
`endif
`ifdef ASSERT_ON
//synopsys translate_off
`ifndef SYNTH_LEVEL1_COMPILE
`ifndef SYNTHESIS
always @(assert_enabled) begin
    if ( assert_enabled === 1'b0 ) begin
        $display("Asserts are disabled for %m");
    end
end
`endif
`endif
//synopsys translate_on
`endif
`endif
// spyglass enable_block W164a W164b W116 W484 W504
//The NV_BLKBOX_SRC0 module is only present when the FIFOGEN_MODULE_SEARCH
// define is set. This is to aid fifogen team search for fifogen fifo
// instance and module names in a given design.
`ifdef FIFOGEN_MODULE_SEARCH
NV_BLKBOX_SRC0 dummy_breadcrumb_fifogen_blkbox (.Y());
`endif
// spyglass enable_block W401 -- clock is not input to module
// synopsys dc_script_begin
// set_boundary_optimization find(design, "NV_NVDLA_RUBIK_opdone_fifo") true
// synopsys dc_script_end
`ifdef SYNTH_LEVEL1_COMPILE
`else
`ifdef SYNTHESIS
`else
`ifdef PRAND_VERILOG
// Only verilog needs any local variables
reg [47:0] prand_local_seed0;
reg prand_initialized0;
reg prand_no_rollpli0;
`endif
`endif
`endif
function [31:0] prand_inst0;
//VCS coverage off
    input [31:0] min;
    input [31:0] max;
    reg [32:0] diff;
    begin
`ifdef SYNTH_LEVEL1_COMPILE
        prand_inst0 = min;
`else
`ifdef SYNTHESIS
        prand_inst0 = min;
`else
`ifdef PRAND_VERILOG
        if (prand_initialized0 !== 1'b1) begin
            prand_no_rollpli0 = $test$plusargs("NO_ROLLPLI");
            if (!prand_no_rollpli0)
                prand_local_seed0 = {$prand_get_seed(0), 16'b0};
            prand_initialized0 = 1'b1;
        end
        if (prand_no_rollpli0) begin
            prand_inst0 = min;
        end else begin
            diff = max - min + 1;
            prand_inst0 = min + prand_local_seed0[47:16] % diff;
// magic numbers taken from Java's random class (same as lrand48)
            prand_local_seed0 = prand_local_seed0 * 48'h5deece66d + 48'd11;
        end
`else
`ifdef PRAND_OFF
        prand_inst0 = min;
`else
        prand_inst0 = $RollPLI(min, max, "auto");
`endif
`endif
`endif
`endif
    end
//VCS coverage on
endfunction
`ifdef SYNTH_LEVEL1_COMPILE
`else
`ifdef SYNTHESIS
`else
`ifdef PRAND_VERILOG
// Only verilog needs any local variables
reg [47:0] prand_local_seed1;
reg prand_initialized1;
reg prand_no_rollpli1;
`endif
`endif
`endif
function [31:0] prand_inst1;
//VCS coverage off
    input [31:0] min;
    input [31:0] max;
    reg [32:0] diff;
    begin
`ifdef SYNTH_LEVEL1_COMPILE
        prand_inst1 = min;
`else
`ifdef SYNTHESIS
        prand_inst1 = min;
`else
`ifdef PRAND_VERILOG
        if (prand_initialized1 !== 1'b1) begin
            prand_no_rollpli1 = $test$plusargs("NO_ROLLPLI");
            if (!prand_no_rollpli1)
                prand_local_seed1 = {$prand_get_seed(1), 16'b0};
            prand_initialized1 = 1'b1;
        end
        if (prand_no_rollpli1) begin
            prand_inst1 = min;
        end else begin
            diff = max - min + 1;
            prand_inst1 = min + prand_local_seed1[47:16] % diff;
// magic numbers taken from Java's random class (same as lrand48)
            prand_local_seed1 = prand_local_seed1 * 48'h5deece66d + 48'd11;
        end
`else
`ifdef PRAND_OFF
        prand_inst1 = min;
`else
        prand_inst1 = $RollPLI(min, max, "auto");
`endif
`endif
`endif
`endif
    end
//VCS coverage on
endfunction
endmodule // NV_NVDLA_RUBIK_opdone_fifo
//
// Flop-Based RAM
//
module NV_NVDLA_RUBIK_opdone_fifo_flopram_rwsa_4x1 (
      clk
    , pwrbus_ram_pd
    , di
    , we
    , wa
    , ra
    , dout
    );
input clk; // write clock
input [31 : 0] pwrbus_ram_pd;
input [0:0] di;
input we;
input [1:0] wa;
input [1:0] ra;
output [0:0] dout;
`ifndef FPGA
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_0 (.A(pwrbus_ram_pd[0]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_1 (.A(pwrbus_ram_pd[1]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_2 (.A(pwrbus_ram_pd[2]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_3 (.A(pwrbus_ram_pd[3]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_4 (.A(pwrbus_ram_pd[4]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_5 (.A(pwrbus_ram_pd[5]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_6 (.A(pwrbus_ram_pd[6]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_7 (.A(pwrbus_ram_pd[7]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_8 (.A(pwrbus_ram_pd[8]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_9 (.A(pwrbus_ram_pd[9]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_10 (.A(pwrbus_ram_pd[10]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_11 (.A(pwrbus_ram_pd[11]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_12 (.A(pwrbus_ram_pd[12]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_13 (.A(pwrbus_ram_pd[13]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_14 (.A(pwrbus_ram_pd[14]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_15 (.A(pwrbus_ram_pd[15]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_16 (.A(pwrbus_ram_pd[16]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_17 (.A(pwrbus_ram_pd[17]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_18 (.A(pwrbus_ram_pd[18]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_19 (.A(pwrbus_ram_pd[19]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_20 (.A(pwrbus_ram_pd[20]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_21 (.A(pwrbus_ram_pd[21]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_22 (.A(pwrbus_ram_pd[22]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_23 (.A(pwrbus_ram_pd[23]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_24 (.A(pwrbus_ram_pd[24]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_25 (.A(pwrbus_ram_pd[25]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_26 (.A(pwrbus_ram_pd[26]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_27 (.A(pwrbus_ram_pd[27]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_28 (.A(pwrbus_ram_pd[28]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_29 (.A(pwrbus_ram_pd[29]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_30 (.A(pwrbus_ram_pd[30]));
NV_BLKBOX_SINK UJ_BBOX2UNIT_UNUSED_pwrbus_31 (.A(pwrbus_ram_pd[31]));
`endif
`ifdef EMU
// we use an emulation ram here to save flops on the emulation board
// so that the monstrous chip can fit :-)
//
reg [1:0] Wa0_vmw;
reg we0_vmw;
reg [0:0] Di0_vmw;
always @( posedge clk ) begin
    Wa0_vmw <= wa;
    we0_vmw <= we;
    Di0_vmw <= di;
end
vmw_NV_NVDLA_RUBIK_opdone_fifo_flopram_rwsa_4x1 emu_ram (
     .Wa0( Wa0_vmw )
   , .we0( we0_vmw )
   , .Di0( Di0_vmw )
   , .Ra0( ra )
   , .Do0( dout )
   );
`else
reg [0:0] ram_ff0;
reg [0:0] ram_ff1;
reg [0:0] ram_ff2;
reg [0:0] ram_ff3;
always @( posedge clk ) begin
    if ( we && wa == 2'd0 ) begin
 ram_ff0 <= di;
    end
    if ( we && wa == 2'd1 ) begin
 ram_ff1 <= di;
    end
    if ( we && wa == 2'd2 ) begin
 ram_ff2 <= di;
    end
    if ( we && wa == 2'd3 ) begin
 ram_ff3 <= di;
    end
end
reg [0:0] dout;
always @(*) begin
    case( ra )
    2'd0: dout = ram_ff0;
    2'd1: dout = ram_ff1;
    2'd2: dout = ram_ff2;
    2'd3: dout = ram_ff3;
//VCS coverage off
    default: dout = {1{`x_or_0}};
//VCS coverage on
    endcase
end
`endif // EMU
endmodule // NV_NVDLA_RUBIK_opdone_fifo_flopram_rwsa_4x1
// emulation model of flopram guts
//
`ifdef EMU
module vmw_NV_NVDLA_RUBIK_opdone_fifo_flopram_rwsa_4x1 (
   Wa0, we0, Di0,
   Ra0, Do0
   );
input [1:0] Wa0;
input we0;
input [0:0] Di0;
input [1:0] Ra0;
output [0:0] Do0;
// Only visible during Spyglass to avoid blackboxes.
`ifdef SPYGLASS_FLOPRAM
assign Do0 = 1'd0;
wire dummy = 1'b0 | (|Wa0) | (|we0) | (|Di0) | (|Ra0);
`endif
// synopsys translate_off
`ifndef SYNTH_LEVEL1_COMPILE
`ifndef SYNTHESIS
reg [0:0] mem[3:0];
// expand mem for debug ease
`ifdef EMU_EXPAND_FLOPRAM_MEM
wire [0:0] Q0 = mem[0];
wire [0:0] Q1 = mem[1];
wire [0:0] Q2 = mem[2];
wire [0:0] Q3 = mem[3];
`endif
// asynchronous ram writes
always @(*) begin
  if ( we0 == 1'b1 ) begin
    #0.1;
    mem[Wa0] = Di0;
  end
end
assign Do0 = mem[Ra0];
`endif
`endif
// synopsys translate_on
// synopsys dc_script_begin
// synopsys dc_script_end
// g2c if { [find / -null_ok -subdesign vmw_NV_NVDLA_RUBIK_opdone_fifo_flopram_rwsa_4x1] != {} } { set_attr preserve 1 [find / -subdesign vmw_NV_NVDLA_RUBIK_opdone_fifo_flopram_rwsa_4x1] }
endmodule // vmw_NV_NVDLA_RUBIK_opdone_fifo_flopram_rwsa_4x1
//vmw: Memory vmw_NV_NVDLA_RUBIK_opdone_fifo_flopram_rwsa_4x1
//vmw: Address-size 2
//vmw: Data-size 1
//vmw: Sensitivity level 1
//vmw: Ports W R
//vmw: terminal we0 WriteEnable0
//vmw: terminal Wa0 address0
//vmw: terminal Di0[0:0] data0[0:0]
//vmw:
//vmw: terminal Ra0 address1
//vmw: terminal Do0[0:0] data1[0:0]
//vmw:
//qt: CELL vmw_NV_NVDLA_RUBIK_opdone_fifo_flopram_rwsa_4x1
//qt: TERMINAL we0 TYPE=WE POLARITY=H PORT=1
//qt: TERMINAL Wa0[%d] TYPE=ADDRESS DIR=W BIT=%1 PORT=1
//qt: TERMINAL Di0[%d] TYPE=DATA DIR=I BIT=%1 PORT=1
//qt:
//qt: TERMINAL Ra0[%d] TYPE=ADDRESS DIR=R BIT=%1 PORT=1
//qt: TERMINAL Do0[%d] TYPE=DATA DIR=O BIT=%1 PORT=1
//qt:
`endif // EMU