Skip to content

M
macroplacement
Commit bdc6ffd5 by sakundu
Options

Updated PDN flow and added PDN config for ASAP7 and SKY130HD 

Signed-off-by: sakundu <sakundu@ucsd.edu>
parent 2cb68375
Showing with 104 additions and 10 deletions
Enablements/ASAP7/util/pdn_config.tcl 0 → 100644
#################################################################
# This is the config file for power grid generation. Variables in
# this files are used by pdn_flow.tcl available in the Flows/util
# directory.
#################################################################
# minCh: If channel width is less than minCh it will be filled
# with hard blockages.
# layers: Name of the layers.
# width: Width of the layer.
# pitch: Distance b/w two vdd/vss set.
# spacing: Spacing b/w the stripe of vdd and vss.
# ldir: Layer direction. 0 is horizontal and 1 is vertical.
# isMacro: If layer stripe is only above macro.
# isBM: If layer is below the top layer of macro.
# isAM: If layer is above the top layer of macro.
# isFP: If layer is for follow pin.
# soffset: Start offset of the stripe.
# addch: Any requierment to add extra layer in the macro
# channel.
#################################################################
set minCh 2
set offset [expr 2.88 - [expr 0.081 + [dbget top.fplan.coreBox_llx ]] ]
set layers "M1 M2 M3 M5 M6 M7"
set width "0 0.018 0.162 0.312 0.416 0.544"
set pitch "0 0 2.88 2.016 12.8 7.2"
set spacing "0 0 0.27 0.504 0.672 0.672"
set ldir "0 0 1 1 0 1"
set isMacro "0 0 0 1 0 0"
set isBM "1 1 1 0 0 0"
set isAM "0 0 0 0 1 1"
set isFP "1 1 0 0 0 0"
set soffset "0 0 $offset 0.254 0.416 0.544"
set addch "0 0 1 0 0 0"
\ No newline at end of file
Enablements/SKY130HD/util/pdn_config.tcl 0 → 100644
#################################################################
# This is the config file for power grid generation. Variables in
# this files are used by pdn_flow.tcl available in the Flows/util
# directory.
#################################################################
# minCh: If channel width is less than minCh it will be filled
# with hard blockages.
# layers: Name of the layers.
# width: Width of the layer.
# pitch: Distance b/w two vdd/vss set.
# spacing: Spacing b/w the stripe of vdd and vss.
# ldir: Layer direction. 0 is horizontal and 1 is vertical.
# isMacro: If layer stripe is only above macro.
# isBM: If layer is below the top layer of macro.
# isAM: If layer is above the top layer of macro.
# isFP: If layer is for follow pin.
# soffset: Start offset of the stripe.
# addch: Any requierment to add extra layer in the macro
# channel.
#################################################################
set minCh 5
set layers "met1 met4 met5 met6 met7 met8 met9"
set width "0 1.38 1.36 1.36 2.76 2.76 3.40"
set pitch "0 20.24 10.2 10.2 30.36 30.36 34.0"
set spacing "0 0.23 0.34 0.34 0.46 0.46 1.70"
set ldir "0 1 0 1 0 1 0"
set isMacro "0 0 1 1 0 0 0"
set isBM "1 1 0 0 0 0 0"
set isAM "0 0 1 1 1 1 1"
set isFP "1 0 0 0 0 0 0"
set soffset "0 2 2 2 2 2 2"
set addch "0 1 0 0 0 0 0"
\ No newline at end of file
Flows/util/pdn_flow.tcl
......@@ -17,7 +17,7 @@
set nets [list VDD VSS]
#### Un Place Global Placed cells and cut Row ####
dbset [dbget top.insts.isHaloBlock 0 -p ].pStatus unplaced
dbset [dbget top.insts.cell.subClass core -p2 ].pStatus unplaced
finishFloorplan -fillPlaceBlockage hard $minCh
cutRow
finishFloorplan -fillPlaceBlockage hard $minCh
......@@ -28,6 +28,10 @@ clearGlobalNets
globalNetConnect VDD -type pgpin -pin VDD -inst * -override
globalNetConnect VSS -type pgpin -pin VSS -inst * -override
######################## For SKY130HD #######################
globalNetConnect VDD -type pgpin -pin VPWR -inst * -override
globalNetConnect VSS -type pgpin -pin VGND -inst * -override
# globalNetConnect VDD -type pgpin -pin VDDCE -inst * -override
# globalNetConnect VDD -type pgpin -pin VDDPE -inst * -override
# globalNetConnect VSS -type pgpin -pin VSSE -inst * -override
......@@ -39,6 +43,10 @@ globalNetConnect VDD -type tiehi -all -override
globalNetConnect VSS -type tielo -all -override
####################################################
deselectAll
select_obj [dbget top.fplan.pBlkgs.name finishfp_place_blkg_* -p1]
deleteSelectedFromFPlan
deselectAll
setGenerateViaMode -auto true
generateVias
......@@ -63,6 +71,7 @@ set flag1 0
while { $i < $lcount } {
set lname [lindex $layers $i]
set isfp [lindex $isFP $i]
set wdth [lindex $width $i]
set dir "vertical"
if { [lindex $ldir $i] == 0 } {
......@@ -71,12 +80,18 @@ while { $i < $lcount } {
if { $isfp == 1 } {
puts "Add follow pin creation script"
deselectAll
editSelect -layer [lindex $layers 0] -net $nets
editDuplicate -layer_horizontal $lname
deselectAll
editSelect -layer $lname -net $nets
editResize -to $wdth -side high -direction y -keep_center_line 1
deselectAll
} else {
set isbm [lindex $isBM $i]
set ism [lindex $isMacro $i]
set isam [lindex $isAM $i]
set spc [lindex $spacing $i]
set wdth [lindex $width $i]
set ptch [lindex $pitch $i]
set sofst [lindex $soffset $i]
set isch [lindex $addch $i]
......@@ -98,11 +113,11 @@ while { $i < $lcount } {
} elseif { $ism == 1 } {
setAddStripeMode -extend_to_closest_target none
setAddStripeMode -inside_cell_only true
foreach mcell [dbget [dbget top.insts.isHaloBlock 1 -p ].cell.name -u] {
foreach mcell [dbget [dbget top.insts.cell.subClass block -p2 ].cell.name -u] {
addStripe -layer $lname -direction $dir -nets $nets -width $wdth -spacing $spc \
-start_offset $sofst -set_to_set_distance $ptch -master $mcell
}
foreach inst [dbget [dbget top.insts.isHaloBlock 1 -p ].name ] {
foreach inst [dbget [dbget top.insts.cell.subClass block -p2 ].name ] {
createRouteBlk -inst $inst -cover -layer $prevLayer -name mcro_blk
}
} elseif { $isam == 1 } {
......@@ -112,7 +127,7 @@ while { $i < $lcount } {
setAddStripeMode -stacked_via_bottom_layer $prevLayer -stacked_via_top_layer $lname
}
addStripe -layer $lname -direction $dir -nets $nets -width $wdth -spacing $spc \
-start_offset $sofst -set_to_set_distance $ptch
-start_offset $sofst -set_to_set_distance $ptch -extend_to design_boundary
if { $isch == 1 } {
setAddStripeMode -extend_to_closest_target same_dir_stripe
addStripe -layer $lname -direction $dir -nets $nets -width $wdth -spacing $spc \
......@@ -121,13 +136,13 @@ while { $i < $lcount } {
} else {
puts "Layer:$lname is not routed"
}
}
set prevLayer $lname
set i [expr $i + 1]
}
}
deleteRouteBlk -name mcro_blk
verify_connectivity -net $nets -geom_connect -no_antenna -error 0
# verify_connectivity -net $nets -geom_connect -no_antenna -error 0
# placeDesign -concurrent_macro changes the default placement
# settings
#setPlaceMode -place_opt_run_global_place full
setPlaceMode -place_opt_run_global_place full
Flows/util/run_CodeFlow.sh 100644 → 100755
......@@ -3,6 +3,5 @@ source /home/tool/anaconda3/etc/profile.d/conda.sh
conda activate py-tf
export PROJ_DIR=`pwd | grep -o '\S*/MacroPlacement'`
export PYTHONPATH=$PYTHONPATH:${PROJ_DIR}/Flows/util/
cd $1
python ${PROJ_DIR}/Flows/util/flow.py $1 output_CodeElement_run1 2>&1 | tee log/codelement_run1.log
python ${PROJ_DIR}/Flows/util/flow.py $PWD output_CodeElement 2>&1 | tee log/codelement.log
exit
Flows/util/run_grp_main.sh
#!/usr/bin/env bash
##########################################################################
# Update HMETIS_DIR PLC_WRAPPER_MAIN and CT_PATH
##########################################################################
if [ $PHY_SYNTH -eq 1 ]; then
export PROJ_DIR=`pwd | grep -o '\S*/MacroPlacement'`
export NETLIST_FILE=`readlink -f *.pb.txt`
......
Flows/util/write_required_def.tcl
## Make sure all the Macro has HALO ##
addHaloToBlock -allMacro $HALO_WIDTH $HALO_WIDTH $HALO_WIDTH $HALO_WIDTH
deselectAll
set top_module [dbget top.name]
......@@ -16,7 +18,13 @@ defOut -selected -floorplan ./def/${top_module}_fp_macro_placed.def
dbset [dbget top.insts.isHaloBlock 1 -p ].pStatus fixed
deselectAll
### Remove Halo as OR do not support ###
deleteHaloFromBlock -allBlock
#### Below files can be used in the Code element to generate clustered netlist ####
defOut -netlist ./def/${top_module}.def
saveNetlist -removePowerGround ./def/${top_module}.v
saveNetlist -flat -removePowerGround ./def/${top_module}_flat.v
### Add halo again ###
addHaloToBlock -allMacro $HALO_WIDTH $HALO_WIDTH $HALO_WIDTH $HALO_WIDTH
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment