Skip to content

G
git2
Commit bb54fad0 by Carlos Martín Nieto
Options

Merge branch 'cmn/zlib-update' into cmn/update-zlib

parents 7064cdaf 7cead31e
Showing with 3527 additions and 449 deletions
deps/zlib/adler32.c
/* adler32.c -- compute the Adler-32 checksum of a data stream
* Copyright (C) 1995-2007 Mark Adler
* Copyright (C) 1995-2011 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -9,9 +9,9 @@
#define local static
local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
#define BASE 65521UL /* largest prime smaller than 65536 */
#define BASE 65521 /* largest prime smaller than 65536 */
#define NMAX 5552
/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
......@@ -21,39 +21,44 @@ local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
#define DO16(buf) DO8(buf,0); DO8(buf,8);
/* use NO_DIVIDE if your processor does not do division in hardware */
/* use NO_DIVIDE if your processor does not do division in hardware --
try it both ways to see which is faster */
#ifdef NO_DIVIDE
# define MOD(a) \
/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
(thank you to John Reiser for pointing this out) */
# define CHOP(a) \
do { \
unsigned long tmp = a >> 16; \
a &= 0xffffUL; \
a += (tmp << 4) - tmp; \
} while (0)
# define MOD28(a) \
do { \
if (a >= (BASE << 16)) a -= (BASE << 16); \
if (a >= (BASE << 15)) a -= (BASE << 15); \
if (a >= (BASE << 14)) a -= (BASE << 14); \
if (a >= (BASE << 13)) a -= (BASE << 13); \
if (a >= (BASE << 12)) a -= (BASE << 12); \
if (a >= (BASE << 11)) a -= (BASE << 11); \
if (a >= (BASE << 10)) a -= (BASE << 10); \
if (a >= (BASE << 9)) a -= (BASE << 9); \
if (a >= (BASE << 8)) a -= (BASE << 8); \
if (a >= (BASE << 7)) a -= (BASE << 7); \
if (a >= (BASE << 6)) a -= (BASE << 6); \
if (a >= (BASE << 5)) a -= (BASE << 5); \
if (a >= (BASE << 4)) a -= (BASE << 4); \
if (a >= (BASE << 3)) a -= (BASE << 3); \
if (a >= (BASE << 2)) a -= (BASE << 2); \
if (a >= (BASE << 1)) a -= (BASE << 1); \
CHOP(a); \
if (a >= BASE) a -= BASE; \
} while (0)
# define MOD4(a) \
# define MOD(a) \
do { \
if (a >= (BASE << 4)) a -= (BASE << 4); \
if (a >= (BASE << 3)) a -= (BASE << 3); \
if (a >= (BASE << 2)) a -= (BASE << 2); \
if (a >= (BASE << 1)) a -= (BASE << 1); \
CHOP(a); \
MOD28(a); \
} while (0)
# define MOD63(a) \
do { /* this assumes a is not negative */ \
z_off64_t tmp = a >> 32; \
a &= 0xffffffffL; \
a += (tmp << 8) - (tmp << 5) + tmp; \
tmp = a >> 16; \
a &= 0xffffL; \
a += (tmp << 4) - tmp; \
tmp = a >> 16; \
a &= 0xffffL; \
a += (tmp << 4) - tmp; \
if (a >= BASE) a -= BASE; \
} while (0)
#else
# define MOD(a) a %= BASE
# define MOD4(a) a %= BASE
# define MOD28(a) a %= BASE
# define MOD63(a) a %= BASE
#endif
/* ========================================================================= */
......@@ -92,7 +97,7 @@ uLong ZEXPORT adler32(adler, buf, len)
}
if (adler >= BASE)
adler -= BASE;
MOD4(sum2); /* only added so many BASE's */
MOD28(sum2); /* only added so many BASE's */
return adler | (sum2 << 16);
}
......@@ -137,8 +142,13 @@ local uLong adler32_combine_(adler1, adler2, len2)
unsigned long sum2;
unsigned rem;
/* for negative len, return invalid adler32 as a clue for debugging */
if (len2 < 0)
return 0xffffffffUL;
/* the derivation of this formula is left as an exercise for the reader */
rem = (unsigned)(len2 % BASE);
MOD63(len2); /* assumes len2 >= 0 */
rem = (unsigned)len2;
sum1 = adler1 & 0xffff;
sum2 = rem * sum1;
MOD(sum2);
......
deps/zlib/compress.c 0 → 100644
/* compress.c -- compress a memory buffer
* Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* @(#) $Id$ */
#define ZLIB_INTERNAL
#include "zlib.h"
/* ===========================================================================
Compresses the source buffer into the destination buffer. The level
parameter has the same meaning as in deflateInit. sourceLen is the byte
length of the source buffer. Upon entry, destLen is the total size of the
destination buffer, which must be at least 0.1% larger than sourceLen plus
12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
memory, Z_BUF_ERROR if there was not enough room in the output buffer,
Z_STREAM_ERROR if the level parameter is invalid.
*/
int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
Bytef *dest;
uLongf *destLen;
const Bytef *source;
uLong sourceLen;
int level;
{
z_stream stream;
int err;
stream.next_in = (z_const Bytef *)source;
stream.avail_in = (uInt)sourceLen;
#ifdef MAXSEG_64K
/* Check for source > 64K on 16-bit machine: */
if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
#endif
stream.next_out = dest;
stream.avail_out = (uInt)*destLen;
if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
stream.zalloc = (alloc_func)0;
stream.zfree = (free_func)0;
stream.opaque = (voidpf)0;
err = deflateInit(&stream, level);
if (err != Z_OK) return err;
err = deflate(&stream, Z_FINISH);
if (err != Z_STREAM_END) {
deflateEnd(&stream);
return err == Z_OK ? Z_BUF_ERROR : err;
}
*destLen = stream.total_out;
err = deflateEnd(&stream);
return err;
}
/* ===========================================================================
*/
int ZEXPORT compress (dest, destLen, source, sourceLen)
Bytef *dest;
uLongf *destLen;
const Bytef *source;
uLong sourceLen;
{
return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
}
/* ===========================================================================
If the default memLevel or windowBits for deflateInit() is changed, then
this function needs to be updated.
*/
uLong ZEXPORT compressBound (sourceLen)
uLong sourceLen;
{
return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
(sourceLen >> 25) + 13;
}
deps/zlib/crc32.c
/* crc32.c -- compute the CRC-32 of a data stream
* Copyright (C) 1995-2006, 2010 Mark Adler
* Copyright (C) 1995-2006, 2010, 2011, 2012 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*
* Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
......@@ -17,6 +17,8 @@
of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should
first call get_crc_table() to initialize the tables before allowing more than
one thread to use crc32().
DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h.
*/
#ifdef MAKECRCH
......@@ -30,31 +32,11 @@
#define local static
/* Find a four-byte integer type for crc32_little() and crc32_big(). */
#ifndef NOBYFOUR
# ifdef STDC /* need ANSI C limits.h to determine sizes */
# include <limits.h>
# define BYFOUR
# if (UINT_MAX == 0xffffffffUL)
typedef unsigned int u4;
# else
# if (ULONG_MAX == 0xffffffffUL)
typedef unsigned long u4;
# else
# if (USHRT_MAX == 0xffffffffUL)
typedef unsigned short u4;
# else
# undef BYFOUR /* can't find a four-byte integer type! */
# endif
# endif
# endif
# endif /* STDC */
#endif /* !NOBYFOUR */
/* Definitions for doing the crc four data bytes at a time. */
#if !defined(NOBYFOUR) && defined(Z_U4)
# define BYFOUR
#endif
#ifdef BYFOUR
# define REV(w) ((((w)>>24)&0xff)+(((w)>>8)&0xff00)+ \
(((w)&0xff00)<<8)+(((w)&0xff)<<24))
local unsigned long crc32_little OF((unsigned long,
const unsigned char FAR *, unsigned));
local unsigned long crc32_big OF((unsigned long,
......@@ -68,16 +50,16 @@
local unsigned long gf2_matrix_times OF((unsigned long *mat,
unsigned long vec));
local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
local uLong crc32_combine_(uLong crc1, uLong crc2, z_off64_t len2);
local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
#ifdef DYNAMIC_CRC_TABLE
local volatile int crc_table_empty = 1;
local unsigned long FAR crc_table[TBLS][256];
local z_crc_t FAR crc_table[TBLS][256];
local void make_crc_table OF((void));
#ifdef MAKECRCH
local void write_table OF((FILE *, const unsigned long FAR *));
local void write_table OF((FILE *, const z_crc_t FAR *));
#endif /* MAKECRCH */
/*
Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
......@@ -107,9 +89,9 @@ local void make_crc_table OF((void));
*/
local void make_crc_table()
{
unsigned long c;
z_crc_t c;
int n, k;
unsigned long poly; /* polynomial exclusive-or pattern */
z_crc_t poly; /* polynomial exclusive-or pattern */
/* terms of polynomial defining this crc (except x^32): */
static volatile int first = 1; /* flag to limit concurrent making */
static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
......@@ -121,13 +103,13 @@ local void make_crc_table()
first = 0;
/* make exclusive-or pattern from polynomial (0xedb88320UL) */
poly = 0UL;
for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++)
poly |= 1UL << (31 - p[n]);
poly = 0;
for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
poly |= (z_crc_t)1 << (31 - p[n]);
/* generate a crc for every 8-bit value */
for (n = 0; n < 256; n++) {
c = (unsigned long)n;
c = (z_crc_t)n;
for (k = 0; k < 8; k++)
c = c & 1 ? poly ^ (c >> 1) : c >> 1;
crc_table[0][n] = c;
......@@ -138,11 +120,11 @@ local void make_crc_table()
and then the byte reversal of those as well as the first table */
for (n = 0; n < 256; n++) {
c = crc_table[0][n];
crc_table[4][n] = REV(c);
crc_table[4][n] = ZSWAP32(c);
for (k = 1; k < 4; k++) {
c = crc_table[0][c & 0xff] ^ (c >> 8);
crc_table[k][n] = c;
crc_table[k + 4][n] = REV(c);
crc_table[k + 4][n] = ZSWAP32(c);
}
}
#endif /* BYFOUR */
......@@ -164,7 +146,7 @@ local void make_crc_table()
if (out == NULL) return;
fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
fprintf(out, "local const unsigned long FAR ");
fprintf(out, "local const z_crc_t FAR ");
fprintf(out, "crc_table[TBLS][256] =\n{\n {\n");
write_table(out, crc_table[0]);
# ifdef BYFOUR
......@@ -184,12 +166,13 @@ local void make_crc_table()
#ifdef MAKECRCH
local void write_table(out, table)
FILE *out;
const unsigned long FAR *table;
const z_crc_t FAR *table;
{
int n;
for (n = 0; n < 256; n++)
fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", table[n],
fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ",
(unsigned long)(table[n]),
n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
}
#endif /* MAKECRCH */
......@@ -204,13 +187,13 @@ local void write_table(out, table)
/* =========================================================================
* This function can be used by asm versions of crc32()
*/
const unsigned long FAR * ZEXPORT get_crc_table()
const z_crc_t FAR * ZEXPORT get_crc_table()
{
#ifdef DYNAMIC_CRC_TABLE
if (crc_table_empty)
make_crc_table();
#endif /* DYNAMIC_CRC_TABLE */
return (const unsigned long FAR *)crc_table;
return (const z_crc_t FAR *)crc_table;
}
/* ========================================================================= */
......@@ -232,7 +215,7 @@ unsigned long ZEXPORT crc32(crc, buf, len)
#ifdef BYFOUR
if (sizeof(void *) == sizeof(ptrdiff_t)) {
u4 endian;
z_crc_t endian;
endian = 1;
if (*((unsigned char *)(&endian)))
......@@ -266,17 +249,17 @@ local unsigned long crc32_little(crc, buf, len)
const unsigned char FAR *buf;
unsigned len;
{
register u4 c;
register const u4 FAR *buf4;
register z_crc_t c;
register const z_crc_t FAR *buf4;
c = (u4)crc;
c = (z_crc_t)crc;
c = ~c;
while (len && ((ptrdiff_t)buf & 3)) {
c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
len--;
}
buf4 = (const u4 FAR *)(const void FAR *)buf;
buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
while (len >= 32) {
DOLIT32;
len -= 32;
......@@ -306,17 +289,17 @@ local unsigned long crc32_big(crc, buf, len)
const unsigned char FAR *buf;
unsigned len;
{
register u4 c;
register const u4 FAR *buf4;
register z_crc_t c;
register const z_crc_t FAR *buf4;
c = REV((u4)crc);
c = ZSWAP32((z_crc_t)crc);
c = ~c;
while (len && ((ptrdiff_t)buf & 3)) {
c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
len--;
}
buf4 = (const u4 FAR *)(const void FAR *)buf;
buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
buf4--;
while (len >= 32) {
DOBIG32;
......@@ -333,7 +316,7 @@ local unsigned long crc32_big(crc, buf, len)
c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
} while (--len);
c = ~c;
return (unsigned long)(REV(c));
return (unsigned long)(ZSWAP32(c));
}
#endif /* BYFOUR */
......
deps/zlib/crc32.h
......@@ -2,7 +2,7 @@
* Generated automatically by crc32.c
*/
local const unsigned long FAR crc_table[TBLS][256] =
local const z_crc_t FAR crc_table[TBLS][256] =
{
{
0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
......
deps/zlib/deflate.c
/* deflate.c -- compress data using the deflation algorithm
* Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
* Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -37,7 +37,7 @@
* REFERENCES
*
* Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
* Available in http://www.ietf.org/rfc/rfc1951.txt
* Available in http://tools.ietf.org/html/rfc1951
*
* A description of the Rabin and Karp algorithm is given in the book
* "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
......@@ -52,7 +52,7 @@
#include "deflate.h"
const char deflate_copyright[] =
" deflate 1.2.5 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
" deflate 1.2.8 Copyright 1995-2013 Jean-loup Gailly and Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
......@@ -155,6 +155,9 @@ local const config configuration_table[10] = {
struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
#endif
/* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */
#define RANK(f) (((f) << 1) - ((f) > 4 ? 9 : 0))
/* ===========================================================================
* Update a hash value with the given input byte
* IN assertion: all calls to to UPDATE_HASH are made with consecutive
......@@ -235,10 +238,19 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
strm->msg = Z_NULL;
if (strm->zalloc == (alloc_func)0) {
#ifdef Z_SOLO
return Z_STREAM_ERROR;
#else
strm->zalloc = zcalloc;
strm->opaque = (voidpf)0;
#endif
}
if (strm->zfree == (free_func)0) strm->zfree = zcfree;
if (strm->zfree == (free_func)0)
#ifdef Z_SOLO
return Z_STREAM_ERROR;
#else
strm->zfree = zcfree;
#endif
#ifdef FASTEST
if (level != 0) level = 1;
......@@ -293,7 +305,7 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
s->pending_buf == Z_NULL) {
s->status = FINISH_STATE;
strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
strm->msg = ERR_MSG(Z_MEM_ERROR);
deflateEnd (strm);
return Z_MEM_ERROR;
}
......@@ -314,43 +326,70 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
uInt dictLength;
{
deflate_state *s;
uInt length = dictLength;
uInt n;
IPos hash_head = 0;
uInt str, n;
int wrap;
unsigned avail;
z_const unsigned char *next;
if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL ||
strm->state->wrap == 2 ||
(strm->state->wrap == 1 && strm->state->status != INIT_STATE))
if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL)
return Z_STREAM_ERROR;
s = strm->state;
if (s->wrap)
strm->adler = adler32(strm->adler, dictionary, dictLength);
wrap = s->wrap;
if (wrap == 2 || (wrap == 1 && s->status != INIT_STATE) || s->lookahead)
return Z_STREAM_ERROR;
if (length < MIN_MATCH) return Z_OK;
if (length > s->w_size) {
length = s->w_size;
dictionary += dictLength - length; /* use the tail of the dictionary */
/* when using zlib wrappers, compute Adler-32 for provided dictionary */
if (wrap == 1)
strm->adler = adler32(strm->adler, dictionary, dictLength);
s->wrap = 0; /* avoid computing Adler-32 in read_buf */
/* if dictionary would fill window, just replace the history */
if (dictLength >= s->w_size) {
if (wrap == 0) { /* already empty otherwise */
CLEAR_HASH(s);
s->strstart = 0;
s->block_start = 0L;
s->insert = 0;
}
dictionary += dictLength - s->w_size; /* use the tail */
dictLength = s->w_size;
}
zmemcpy(s->window, dictionary, length);
s->strstart = length;
s->block_start = (long)length;
/* Insert all strings in the hash table (except for the last two bytes).
* s->lookahead stays null, so s->ins_h will be recomputed at the next
* call of fill_window.
*/
s->ins_h = s->window[0];
UPDATE_HASH(s, s->ins_h, s->window[1]);
for (n = 0; n <= length - MIN_MATCH; n++) {
INSERT_STRING(s, n, hash_head);
/* insert dictionary into window and hash */
avail = strm->avail_in;
next = strm->next_in;
strm->avail_in = dictLength;
strm->next_in = (z_const Bytef *)dictionary;
fill_window(s);
while (s->lookahead >= MIN_MATCH) {
str = s->strstart;
n = s->lookahead - (MIN_MATCH-1);
do {
UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
#ifndef FASTEST
s->prev[str & s->w_mask] = s->head[s->ins_h];
#endif
s->head[s->ins_h] = (Pos)str;
str++;
} while (--n);
s->strstart = str;
s->lookahead = MIN_MATCH-1;
fill_window(s);
}
if (hash_head) hash_head = 0; /* to make compiler happy */
s->strstart += s->lookahead;
s->block_start = (long)s->strstart;
s->insert = s->lookahead;
s->lookahead = 0;
s->match_length = s->prev_length = MIN_MATCH-1;
s->match_available = 0;
strm->next_in = next;
strm->avail_in = avail;
s->wrap = wrap;
return Z_OK;
}
/* ========================================================================= */
int ZEXPORT deflateReset (strm)
int ZEXPORT deflateResetKeep (strm)
z_streamp strm;
{
deflate_state *s;
......@@ -380,12 +419,23 @@ int ZEXPORT deflateReset (strm)
s->last_flush = Z_NO_FLUSH;
_tr_init(s);
lm_init(s);
return Z_OK;
}
/* ========================================================================= */
int ZEXPORT deflateReset (strm)
z_streamp strm;
{
int ret;
ret = deflateResetKeep(strm);
if (ret == Z_OK)
lm_init(strm->state);
return ret;
}
/* ========================================================================= */
int ZEXPORT deflateSetHeader (strm, head)
z_streamp strm;
gz_headerp head;
......@@ -397,14 +447,42 @@ int ZEXPORT deflateSetHeader (strm, head)
}
/* ========================================================================= */
int ZEXPORT deflatePending (strm, pending, bits)
unsigned *pending;
int *bits;
z_streamp strm;
{
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
if (pending != Z_NULL)
*pending = strm->state->pending;
if (bits != Z_NULL)
*bits = strm->state->bi_valid;
return Z_OK;
}
/* ========================================================================= */
int ZEXPORT deflatePrime (strm, bits, value)
z_streamp strm;
int bits;
int value;
{
deflate_state *s;
int put;
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
strm->state->bi_valid = bits;
strm->state->bi_buf = (ush)(value & ((1 << bits) - 1));
s = strm->state;
if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3))
return Z_BUF_ERROR;
do {
put = Buf_size - s->bi_valid;
if (put > bits)
put = bits;
s->bi_buf |= (ush)((value & ((1 << put) - 1)) << s->bi_valid);
s->bi_valid += put;
_tr_flush_bits(s);
value >>= put;
bits -= put;
} while (bits);
return Z_OK;
}
......@@ -435,6 +513,8 @@ int ZEXPORT deflateParams(strm, level, strategy)
strm->total_in != 0) {
/* Flush the last buffer: */
err = deflate(strm, Z_BLOCK);
if (err == Z_BUF_ERROR && s->pending == 0)
err = Z_OK;
}
if (s->level != level) {
s->level = level;
......@@ -562,19 +642,22 @@ local void putShortMSB (s, b)
local void flush_pending(strm)
z_streamp strm;
{
unsigned len = strm->state->pending;
unsigned len;
deflate_state *s = strm->state;
_tr_flush_bits(s);
len = s->pending;
if (len > strm->avail_out) len = strm->avail_out;
if (len == 0) return;
zmemcpy(strm->next_out, strm->state->pending_out, len);
zmemcpy(strm->next_out, s->pending_out, len);
strm->next_out += len;
strm->state->pending_out += len;
s->pending_out += len;
strm->total_out += len;
strm->avail_out -= len;
strm->state->pending -= len;
if (strm->state->pending == 0) {
strm->state->pending_out = strm->state->pending_buf;
s->pending -= len;
if (s->pending == 0) {
s->pending_out = s->pending_buf;
}
}
......@@ -801,7 +884,7 @@ int ZEXPORT deflate (strm, flush)
* flushes. For repeated and useless calls with Z_FINISH, we keep
* returning Z_STREAM_END instead of Z_BUF_ERROR.
*/
} else if (strm->avail_in == 0 && flush <= old_flush &&
} else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) &&
flush != Z_FINISH) {
ERR_RETURN(strm, Z_BUF_ERROR);
}
......@@ -850,6 +933,7 @@ int ZEXPORT deflate (strm, flush)
if (s->lookahead == 0) {
s->strstart = 0;
s->block_start = 0L;
s->insert = 0;
}
}
}
......@@ -945,12 +1029,12 @@ int ZEXPORT deflateCopy (dest, source)
ss = source->state;
zmemcpy(dest, source, sizeof(z_stream));
zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
if (ds == Z_NULL) return Z_MEM_ERROR;
dest->state = (struct internal_state FAR *) ds;
zmemcpy(ds, ss, sizeof(deflate_state));
zmemcpy((voidpf)ds, (voidpf)ss, sizeof(deflate_state));
ds->strm = dest;
ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
......@@ -966,8 +1050,8 @@ int ZEXPORT deflateCopy (dest, source)
}
/* following zmemcpy do not work for 16-bit MSDOS */
zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos));
zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos));
zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
......@@ -1001,15 +1085,15 @@ local int read_buf(strm, buf, size)
strm->avail_in -= len;
zmemcpy(buf, strm->next_in, len);
if (strm->state->wrap == 1) {
strm->adler = adler32(strm->adler, strm->next_in, len);
strm->adler = adler32(strm->adler, buf, len);
}
#ifdef GZIP
else if (strm->state->wrap == 2) {
strm->adler = crc32(strm->adler, strm->next_in, len);
strm->adler = crc32(strm->adler, buf, len);
}
#endif
zmemcpy(buf, strm->next_in, len);
strm->next_in += len;
strm->total_in += len;
......@@ -1036,6 +1120,7 @@ local void lm_init (s)
s->strstart = 0;
s->block_start = 0L;
s->lookahead = 0;
s->insert = 0;
s->match_length = s->prev_length = MIN_MATCH-1;
s->match_available = 0;
s->ins_h = 0;
......@@ -1310,6 +1395,8 @@ local void fill_window(s)
unsigned more; /* Amount of free space at the end of the window. */
uInt wsize = s->w_size;
Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead");
do {
more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
......@@ -1362,7 +1449,7 @@ local void fill_window(s)
#endif
more += wsize;
}
if (s->strm->avail_in == 0) return;
if (s->strm->avail_in == 0) break;
/* If there was no sliding:
* strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
......@@ -1381,12 +1468,24 @@ local void fill_window(s)
s->lookahead += n;
/* Initialize the hash value now that we have some input: */
if (s->lookahead >= MIN_MATCH) {
s->ins_h = s->window[s->strstart];
UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
if (s->lookahead + s->insert >= MIN_MATCH) {
uInt str = s->strstart - s->insert;
s->ins_h = s->window[str];
UPDATE_HASH(s, s->ins_h, s->window[str + 1]);
#if MIN_MATCH != 3
Call UPDATE_HASH() MIN_MATCH-3 more times
#endif
while (s->insert) {
UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
#ifndef FASTEST
s->prev[str & s->w_mask] = s->head[s->ins_h];
#endif
s->head[s->ins_h] = (Pos)str;
str++;
s->insert--;
if (s->lookahead + s->insert < MIN_MATCH)
break;
}
}
/* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
* but this is not important since only literal bytes will be emitted.
......@@ -1427,6 +1526,9 @@ local void fill_window(s)
s->high_water += init;
}
}
Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD,
"not enough room for search");
}
/* ===========================================================================
......@@ -1506,8 +1608,14 @@ local block_state deflate_stored(s, flush)
FLUSH_BLOCK(s, 0);
}
}
FLUSH_BLOCK(s, flush == Z_FINISH);
return flush == Z_FINISH ? finish_done : block_done;
s->insert = 0;
if (flush == Z_FINISH) {
FLUSH_BLOCK(s, 1);
return finish_done;
}
if ((long)s->strstart > s->block_start)
FLUSH_BLOCK(s, 0);
return block_done;
}
/* ===========================================================================
......@@ -1603,8 +1711,14 @@ local block_state deflate_fast(s, flush)
}
if (bflush) FLUSH_BLOCK(s, 0);
}
FLUSH_BLOCK(s, flush == Z_FINISH);
return flush == Z_FINISH ? finish_done : block_done;
s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
if (flush == Z_FINISH) {
FLUSH_BLOCK(s, 1);
return finish_done;
}
if (s->last_lit)
FLUSH_BLOCK(s, 0);
return block_done;
}
#ifndef FASTEST
......@@ -1728,8 +1842,14 @@ local block_state deflate_slow(s, flush)
_tr_tally_lit(s, s->window[s->strstart-1], bflush);
s->match_available = 0;
}
FLUSH_BLOCK(s, flush == Z_FINISH);
return flush == Z_FINISH ? finish_done : block_done;
s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
if (flush == Z_FINISH) {
FLUSH_BLOCK(s, 1);
return finish_done;
}
if (s->last_lit)
FLUSH_BLOCK(s, 0);
return block_done;
}
#endif /* FASTEST */
......@@ -1749,11 +1869,11 @@ local block_state deflate_rle(s, flush)
for (;;) {
/* Make sure that we always have enough lookahead, except
* at the end of the input file. We need MAX_MATCH bytes
* for the longest encodable run.
* for the longest run, plus one for the unrolled loop.
*/
if (s->lookahead < MAX_MATCH) {
if (s->lookahead <= MAX_MATCH) {
fill_window(s);
if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) {
if (s->lookahead <= MAX_MATCH && flush == Z_NO_FLUSH) {
return need_more;
}
if (s->lookahead == 0) break; /* flush the current block */
......@@ -1776,6 +1896,7 @@ local block_state deflate_rle(s, flush)
if (s->match_length > s->lookahead)
s->match_length = s->lookahead;
}
Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan");
}
/* Emit match if have run of MIN_MATCH or longer, else emit literal */
......@@ -1796,8 +1917,14 @@ local block_state deflate_rle(s, flush)
}
if (bflush) FLUSH_BLOCK(s, 0);
}
FLUSH_BLOCK(s, flush == Z_FINISH);
return flush == Z_FINISH ? finish_done : block_done;
s->insert = 0;
if (flush == Z_FINISH) {
FLUSH_BLOCK(s, 1);
return finish_done;
}
if (s->last_lit)
FLUSH_BLOCK(s, 0);
return block_done;
}
/* ===========================================================================
......@@ -1829,6 +1956,12 @@ local block_state deflate_huff(s, flush)
s->strstart++;
if (bflush) FLUSH_BLOCK(s, 0);
}
FLUSH_BLOCK(s, flush == Z_FINISH);
return flush == Z_FINISH ? finish_done : block_done;
s->insert = 0;
if (flush == Z_FINISH) {
FLUSH_BLOCK(s, 1);
return finish_done;
}
if (s->last_lit)
FLUSH_BLOCK(s, 0);
return block_done;
}
deps/zlib/deflate.h
/* deflate.h -- internal compression state
* Copyright (C) 1995-2010 Jean-loup Gailly
* Copyright (C) 1995-2012 Jean-loup Gailly
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -48,6 +48,9 @@
#define MAX_BITS 15
/* All codes must not exceed MAX_BITS bits */
#define Buf_size 16
/* size of bit buffer in bi_buf */
#define INIT_STATE 42
#define EXTRA_STATE 69
#define NAME_STATE 73
......@@ -101,7 +104,7 @@ typedef struct internal_state {
int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
gz_headerp gzhead; /* gzip header information to write */
uInt gzindex; /* where in extra, name, or comment */
Byte method; /* STORED (for zip only) or DEFLATED */
Byte method; /* can only be DEFLATED */
int last_flush; /* value of flush param for previous deflate call */
/* used by deflate.c: */
......@@ -188,7 +191,7 @@ typedef struct internal_state {
int nice_match; /* Stop searching when current match exceeds this */
/* used by trees.c: */
/* Didn't use ct_data typedef below to supress compiler warning */
/* Didn't use ct_data typedef below to suppress compiler warning */
struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */
struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */
......@@ -244,7 +247,7 @@ typedef struct internal_state {
ulg opt_len; /* bit length of current block with optimal trees */
ulg static_len; /* bit length of current block with static trees */
uInt matches; /* number of string matches in current block */
int last_eob_len; /* bit length of EOB code for last block */
uInt insert; /* bytes at end of window left to insert */
#ifdef DEBUG
ulg compressed_len; /* total bit length of compressed file mod 2^32 */
......@@ -294,6 +297,7 @@ void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
ulg stored_len, int last));
void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s));
void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
ulg stored_len, int last));
......
deps/zlib/gzclose.c 0 → 100644
/* gzclose.c -- zlib gzclose() function
* Copyright (C) 2004, 2010 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
#include "gzguts.h"
/* gzclose() is in a separate file so that it is linked in only if it is used.
That way the other gzclose functions can be used instead to avoid linking in
unneeded compression or decompression routines. */
int ZEXPORT gzclose(file)
gzFile file;
{
#ifndef NO_GZCOMPRESS
gz_statep state;
if (file == NULL)
return Z_STREAM_ERROR;
state = (gz_statep)file;
return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file);
#else
return gzclose_r(file);
#endif
}
deps/zlib/gzguts.h 0 → 100644
/* gzguts.h -- zlib internal header definitions for gz* operations
* Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
#ifdef _LARGEFILE64_SOURCE
# ifndef _LARGEFILE_SOURCE
# define _LARGEFILE_SOURCE 1
# endif
# ifdef _FILE_OFFSET_BITS
# undef _FILE_OFFSET_BITS
# endif
#endif
#ifdef HAVE_HIDDEN
# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
#else
# define ZLIB_INTERNAL
#endif
#include <stdio.h>
#include "zlib.h"
#ifdef STDC
# include <string.h>
# include <stdlib.h>
# include <limits.h>
#endif
#include <fcntl.h>
#ifdef _WIN32
# include <stddef.h>
#endif
#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32)
# include <io.h>
#endif
#ifdef WINAPI_FAMILY
# define open _open
# define read _read
# define write _write
# define close _close
#endif
#ifdef NO_DEFLATE /* for compatibility with old definition */
# define NO_GZCOMPRESS
#endif
#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
# ifndef HAVE_VSNPRINTF
# define HAVE_VSNPRINTF
# endif
#endif
#if defined(__CYGWIN__)
# ifndef HAVE_VSNPRINTF
# define HAVE_VSNPRINTF
# endif
#endif
#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410)
# ifndef HAVE_VSNPRINTF
# define HAVE_VSNPRINTF
# endif
#endif
#ifndef HAVE_VSNPRINTF
# ifdef MSDOS
/* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
but for now we just assume it doesn't. */
# define NO_vsnprintf
# endif
# ifdef __TURBOC__
# define NO_vsnprintf
# endif
# ifdef WIN32
/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
# if !defined(vsnprintf) && !defined(NO_vsnprintf)
# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
# define vsnprintf _vsnprintf
# endif
# endif
# endif
# ifdef __SASC
# define NO_vsnprintf
# endif
# ifdef VMS
# define NO_vsnprintf
# endif
# ifdef __OS400__
# define NO_vsnprintf
# endif
# ifdef __MVS__
# define NO_vsnprintf
# endif
#endif
/* unlike snprintf (which is required in C99, yet still not supported by
Microsoft more than a decade later!), _snprintf does not guarantee null
termination of the result -- however this is only used in gzlib.c where
the result is assured to fit in the space provided */
#ifdef _MSC_VER
# define snprintf _snprintf
#endif
#ifndef local
# define local static
#endif
/* compile with -Dlocal if your debugger can't find static symbols */
/* gz* functions always use library allocation functions */
#ifndef STDC
extern voidp malloc OF((uInt size));
extern void free OF((voidpf ptr));
#endif
/* get errno and strerror definition */
#if defined UNDER_CE
# include <windows.h>
# define zstrerror() gz_strwinerror((DWORD)GetLastError())
#else
# ifndef NO_STRERROR
# include <errno.h>
# define zstrerror() strerror(errno)
# else
# define zstrerror() "stdio error (consult errno)"
# endif
#endif
/* provide prototypes for these when building zlib without LFS */
#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
#endif
/* default memLevel */
#if MAX_MEM_LEVEL >= 8
# define DEF_MEM_LEVEL 8
#else
# define DEF_MEM_LEVEL MAX_MEM_LEVEL
#endif
/* default i/o buffer size -- double this for output when reading (this and
twice this must be able to fit in an unsigned type) */
#define GZBUFSIZE 8192
/* gzip modes, also provide a little integrity check on the passed structure */
#define GZ_NONE 0
#define GZ_READ 7247
#define GZ_WRITE 31153
#define GZ_APPEND 1 /* mode set to GZ_WRITE after the file is opened */
/* values for gz_state how */
#define LOOK 0 /* look for a gzip header */
#define COPY 1 /* copy input directly */
#define GZIP 2 /* decompress a gzip stream */
/* internal gzip file state data structure */
typedef struct {
/* exposed contents for gzgetc() macro */
struct gzFile_s x; /* "x" for exposed */
/* x.have: number of bytes available at x.next */
/* x.next: next output data to deliver or write */
/* x.pos: current position in uncompressed data */
/* used for both reading and writing */
int mode; /* see gzip modes above */
int fd; /* file descriptor */
char *path; /* path or fd for error messages */
unsigned size; /* buffer size, zero if not allocated yet */
unsigned want; /* requested buffer size, default is GZBUFSIZE */
unsigned char *in; /* input buffer */
unsigned char *out; /* output buffer (double-sized when reading) */
int direct; /* 0 if processing gzip, 1 if transparent */
/* just for reading */
int how; /* 0: get header, 1: copy, 2: decompress */
z_off64_t start; /* where the gzip data started, for rewinding */
int eof; /* true if end of input file reached */
int past; /* true if read requested past end */
/* just for writing */
int level; /* compression level */
int strategy; /* compression strategy */
/* seek request */
z_off64_t skip; /* amount to skip (already rewound if backwards) */
int seek; /* true if seek request pending */
/* error information */
int err; /* error code */
char *msg; /* error message */
/* zlib inflate or deflate stream */
z_stream strm; /* stream structure in-place (not a pointer) */
} gz_state;
typedef gz_state FAR *gz_statep;
/* shared functions */
void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
#if defined UNDER_CE
char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
#endif
/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
value -- needed when comparing unsigned to z_off64_t, which is signed
(possible z_off64_t types off_t, off64_t, and long are all signed) */
#ifdef INT_MAX
# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
#else
unsigned ZLIB_INTERNAL gz_intmax OF((void));
# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
#endif
deps/zlib/gzlib.c 0 → 100644
/* gzlib.c -- zlib functions common to reading and writing gzip files
* Copyright (C) 2004, 2010, 2011, 2012, 2013 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
#include "gzguts.h"
#if defined(_WIN32) && !defined(__BORLANDC__)
# define LSEEK _lseeki64
#else
#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
# define LSEEK lseek64
#else
# define LSEEK lseek
#endif
#endif
/* Local functions */
local void gz_reset OF((gz_statep));
local gzFile gz_open OF((const void *, int, const char *));
#if defined UNDER_CE
/* Map the Windows error number in ERROR to a locale-dependent error message
string and return a pointer to it. Typically, the values for ERROR come
from GetLastError.
The string pointed to shall not be modified by the application, but may be
overwritten by a subsequent call to gz_strwinerror
The gz_strwinerror function does not change the current setting of
GetLastError. */
char ZLIB_INTERNAL *gz_strwinerror (error)
DWORD error;
{
static char buf[1024];
wchar_t *msgbuf;
DWORD lasterr = GetLastError();
DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
| FORMAT_MESSAGE_ALLOCATE_BUFFER,
NULL,
error,
0, /* Default language */
(LPVOID)&msgbuf,
0,
NULL);
if (chars != 0) {
/* If there is an \r\n appended, zap it. */
if (chars >= 2
&& msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
chars -= 2;
msgbuf[chars] = 0;
}
if (chars > sizeof (buf) - 1) {
chars = sizeof (buf) - 1;
msgbuf[chars] = 0;
}
wcstombs(buf, msgbuf, chars + 1);
LocalFree(msgbuf);
}
else {
sprintf(buf, "unknown win32 error (%ld)", error);
}
SetLastError(lasterr);
return buf;
}
#endif /* UNDER_CE */
/* Reset gzip file state */
local void gz_reset(state)
gz_statep state;
{
state->x.have = 0; /* no output data available */
if (state->mode == GZ_READ) { /* for reading ... */
state->eof = 0; /* not at end of file */
state->past = 0; /* have not read past end yet */
state->how = LOOK; /* look for gzip header */
}
state->seek = 0; /* no seek request pending */
gz_error(state, Z_OK, NULL); /* clear error */
state->x.pos = 0; /* no uncompressed data yet */
state->strm.avail_in = 0; /* no input data yet */
}
/* Open a gzip file either by name or file descriptor. */
local gzFile gz_open(path, fd, mode)
const void *path;
int fd;
const char *mode;
{
gz_statep state;
size_t len;
int oflag;
#ifdef O_CLOEXEC
int cloexec = 0;
#endif
#ifdef O_EXCL
int exclusive = 0;
#endif
/* check input */
if (path == NULL)
return NULL;
/* allocate gzFile structure to return */
state = (gz_statep)malloc(sizeof(gz_state));
if (state == NULL)
return NULL;
state->size = 0; /* no buffers allocated yet */
state->want = GZBUFSIZE; /* requested buffer size */
state->msg = NULL; /* no error message yet */
/* interpret mode */
state->mode = GZ_NONE;
state->level = Z_DEFAULT_COMPRESSION;
state->strategy = Z_DEFAULT_STRATEGY;
state->direct = 0;
while (*mode) {
if (*mode >= '0' && *mode <= '9')
state->level = *mode - '0';
else
switch (*mode) {
case 'r':
state->mode = GZ_READ;
break;
#ifndef NO_GZCOMPRESS
case 'w':
state->mode = GZ_WRITE;
break;
case 'a':
state->mode = GZ_APPEND;
break;
#endif
case '+': /* can't read and write at the same time */
free(state);
return NULL;
case 'b': /* ignore -- will request binary anyway */
break;
#ifdef O_CLOEXEC
case 'e':
cloexec = 1;
break;
#endif
#ifdef O_EXCL
case 'x':
exclusive = 1;
break;
#endif
case 'f':
state->strategy = Z_FILTERED;
break;
case 'h':
state->strategy = Z_HUFFMAN_ONLY;
break;
case 'R':
state->strategy = Z_RLE;
break;
case 'F':
state->strategy = Z_FIXED;
break;
case 'T':
state->direct = 1;
break;
default: /* could consider as an error, but just ignore */
;
}
mode++;
}
/* must provide an "r", "w", or "a" */
if (state->mode == GZ_NONE) {
free(state);
return NULL;
}
/* can't force transparent read */
if (state->mode == GZ_READ) {
if (state->direct) {
free(state);
return NULL;
}
state->direct = 1; /* for empty file */
}
/* save the path name for error messages */
#ifdef _WIN32
if (fd == -2) {
len = wcstombs(NULL, path, 0);
if (len == (size_t)-1)
len = 0;
}
else
#endif
len = strlen((const char *)path);
state->path = (char *)malloc(len + 1);
if (state->path == NULL) {
free(state);
return NULL;
}
#ifdef _WIN32
if (fd == -2)
if (len)
wcstombs(state->path, path, len + 1);
else
*(state->path) = 0;
else
#endif
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
snprintf(state->path, len + 1, "%s", (const char *)path);
#else
strcpy(state->path, path);
#endif
/* compute the flags for open() */
oflag =
#ifdef O_LARGEFILE
O_LARGEFILE |
#endif
#ifdef O_BINARY
O_BINARY |
#endif
#ifdef O_CLOEXEC
(cloexec ? O_CLOEXEC : 0) |
#endif
(state->mode == GZ_READ ?
O_RDONLY :
(O_WRONLY | O_CREAT |
#ifdef O_EXCL
(exclusive ? O_EXCL : 0) |
#endif
(state->mode == GZ_WRITE ?
O_TRUNC :
O_APPEND)));
/* open the file with the appropriate flags (or just use fd) */
state->fd = fd > -1 ? fd : (
#ifdef _WIN32
fd == -2 ? _wopen(path, oflag, 0666) :
#endif
open((const char *)path, oflag, 0666));
if (state->fd == -1) {
free(state->path);
free(state);
return NULL;
}
if (state->mode == GZ_APPEND)
state->mode = GZ_WRITE; /* simplify later checks */
/* save the current position for rewinding (only if reading) */
if (state->mode == GZ_READ) {
state->start = LSEEK(state->fd, 0, SEEK_CUR);
if (state->start == -1) state->start = 0;
}
/* initialize stream */
gz_reset(state);
/* return stream */
return (gzFile)state;
}
/* -- see zlib.h -- */
gzFile ZEXPORT gzopen(path, mode)
const char *path;
const char *mode;
{
return gz_open(path, -1, mode);
}
/* -- see zlib.h -- */
gzFile ZEXPORT gzopen64(path, mode)
const char *path;
const char *mode;
{
return gz_open(path, -1, mode);
}
/* -- see zlib.h -- */
gzFile ZEXPORT gzdopen(fd, mode)
int fd;
const char *mode;
{
char *path; /* identifier for error messages */
gzFile gz;
if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL)
return NULL;
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
snprintf(path, 7 + 3 * sizeof(int), "<fd:%d>", fd); /* for debugging */
#else
sprintf(path, "<fd:%d>", fd); /* for debugging */
#endif
gz = gz_open(path, fd, mode);
free(path);
return gz;
}
/* -- see zlib.h -- */
#ifdef _WIN32
gzFile ZEXPORT gzopen_w(path, mode)
const wchar_t *path;
const char *mode;
{
return gz_open(path, -2, mode);
}
#endif
/* -- see zlib.h -- */
int ZEXPORT gzbuffer(file, size)
gzFile file;
unsigned size;
{
gz_statep state;
/* get internal structure and check integrity */
if (file == NULL)
return -1;
state = (gz_statep)file;
if (state->mode != GZ_READ && state->mode != GZ_WRITE)
return -1;
/* make sure we haven't already allocated memory */
if (state->size != 0)
return -1;
/* check and set requested size */
if (size < 2)
size = 2; /* need two bytes to check magic header */
state->want = size;
return 0;
}
/* -- see zlib.h -- */
int ZEXPORT gzrewind(file)
gzFile file;
{
gz_statep state;
/* get internal structure */
if (file == NULL)
return -1;
state = (gz_statep)file;
/* check that we're reading and that there's no error */
if (state->mode != GZ_READ ||
(state->err != Z_OK && state->err != Z_BUF_ERROR))
return -1;
/* back up and start over */
if (LSEEK(state->fd, state->start, SEEK_SET) == -1)
return -1;
gz_reset(state);
return 0;
}
/* -- see zlib.h -- */
z_off64_t ZEXPORT gzseek64(file, offset, whence)
gzFile file;
z_off64_t offset;
int whence;
{
unsigned n;
z_off64_t ret;
gz_statep state;
/* get internal structure and check integrity */
if (file == NULL)
return -1;
state = (gz_statep)file;
if (state->mode != GZ_READ && state->mode != GZ_WRITE)
return -1;
/* check that there's no error */
if (state->err != Z_OK && state->err != Z_BUF_ERROR)
return -1;
/* can only seek from start or relative to current position */
if (whence != SEEK_SET && whence != SEEK_CUR)
return -1;
/* normalize offset to a SEEK_CUR specification */
if (whence == SEEK_SET)
offset -= state->x.pos;
else if (state->seek)
offset += state->skip;
state->seek = 0;
/* if within raw area while reading, just go there */
if (state->mode == GZ_READ && state->how == COPY &&
state->x.pos + offset >= 0) {
ret = LSEEK(state->fd, offset - state->x.have, SEEK_CUR);
if (ret == -1)
return -1;
state->x.have = 0;
state->eof = 0;
state->past = 0;
state->seek = 0;
gz_error(state, Z_OK, NULL);
state->strm.avail_in = 0;
state->x.pos += offset;
return state->x.pos;
}
/* calculate skip amount, rewinding if needed for back seek when reading */
if (offset < 0) {
if (state->mode != GZ_READ) /* writing -- can't go backwards */
return -1;
offset += state->x.pos;
if (offset < 0) /* before start of file! */
return -1;
if (gzrewind(file) == -1) /* rewind, then skip to offset */
return -1;
}
/* if reading, skip what's in output buffer (one less gzgetc() check) */
if (state->mode == GZ_READ) {
n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ?
(unsigned)offset : state->x.have;
state->x.have -= n;
state->x.next += n;
state->x.pos += n;
offset -= n;
}
/* request skip (if not zero) */
if (offset) {
state->seek = 1;
state->skip = offset;
}
return state->x.pos + offset;
}
/* -- see zlib.h -- */
z_off_t ZEXPORT gzseek(file, offset, whence)
gzFile file;
z_off_t offset;
int whence;
{
z_off64_t ret;
ret = gzseek64(file, (z_off64_t)offset, whence);
return ret == (z_off_t)ret ? (z_off_t)ret : -1;
}
/* -- see zlib.h -- */
z_off64_t ZEXPORT gztell64(file)
gzFile file;
{
gz_statep state;
/* get internal structure and check integrity */
if (file == NULL)
return -1;
state = (gz_statep)file;
if (state->mode != GZ_READ && state->mode != GZ_WRITE)
return -1;
/* return position */
return state->x.pos + (state->seek ? state->skip : 0);
}
/* -- see zlib.h -- */
z_off_t ZEXPORT gztell(file)
gzFile file;
{
z_off64_t ret;
ret = gztell64(file);
return ret == (z_off_t)ret ? (z_off_t)ret : -1;
}
/* -- see zlib.h -- */
z_off64_t ZEXPORT gzoffset64(file)
gzFile file;
{
z_off64_t offset;
gz_statep state;
/* get internal structure and check integrity */
if (file == NULL)
return -1;
state = (gz_statep)file;
if (state->mode != GZ_READ && state->mode != GZ_WRITE)
return -1;
/* compute and return effective offset in file */
offset = LSEEK(state->fd, 0, SEEK_CUR);
if (offset == -1)
return -1;
if (state->mode == GZ_READ) /* reading */
offset -= state->strm.avail_in; /* don't count buffered input */
return offset;
}
/* -- see zlib.h -- */
z_off_t ZEXPORT gzoffset(file)
gzFile file;
{
z_off64_t ret;
ret = gzoffset64(file);
return ret == (z_off_t)ret ? (z_off_t)ret : -1;
}
/* -- see zlib.h -- */
int ZEXPORT gzeof(file)
gzFile file;
{
gz_statep state;
/* get internal structure and check integrity */
if (file == NULL)
return 0;
state = (gz_statep)file;
if (state->mode != GZ_READ && state->mode != GZ_WRITE)
return 0;
/* return end-of-file state */
return state->mode == GZ_READ ? state->past : 0;
}
/* -- see zlib.h -- */
const char * ZEXPORT gzerror(file, errnum)
gzFile file;
int *errnum;
{
gz_statep state;
/* get internal structure and check integrity */
if (file == NULL)
return NULL;
state = (gz_statep)file;
if (state->mode != GZ_READ && state->mode != GZ_WRITE)
return NULL;
/* return error information */
if (errnum != NULL)
*errnum = state->err;
return state->err == Z_MEM_ERROR ? "out of memory" :
(state->msg == NULL ? "" : state->msg);
}
/* -- see zlib.h -- */
void ZEXPORT gzclearerr(file)
gzFile file;
{
gz_statep state;
/* get internal structure and check integrity */
if (file == NULL)
return;
state = (gz_statep)file;
if (state->mode != GZ_READ && state->mode != GZ_WRITE)
return;
/* clear error and end-of-file */
if (state->mode == GZ_READ) {
state->eof = 0;
state->past = 0;
}
gz_error(state, Z_OK, NULL);
}
/* Create an error message in allocated memory and set state->err and
state->msg accordingly. Free any previous error message already there. Do
not try to free or allocate space if the error is Z_MEM_ERROR (out of
memory). Simply save the error message as a static string. If there is an
allocation failure constructing the error message, then convert the error to
out of memory. */
void ZLIB_INTERNAL gz_error(state, err, msg)
gz_statep state;
int err;
const char *msg;
{
/* free previously allocated message and clear */
if (state->msg != NULL) {
if (state->err != Z_MEM_ERROR)
free(state->msg);
state->msg = NULL;
}
/* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */
if (err != Z_OK && err != Z_BUF_ERROR)
state->x.have = 0;
/* set error code, and if no message, then done */
state->err = err;
if (msg == NULL)
return;
/* for an out of memory error, return literal string when requested */
if (err == Z_MEM_ERROR)
return;
/* construct error message with path */
if ((state->msg = (char *)malloc(strlen(state->path) + strlen(msg) + 3)) ==
NULL) {
state->err = Z_MEM_ERROR;
return;
}
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
snprintf(state->msg, strlen(state->path) + strlen(msg) + 3,
"%s%s%s", state->path, ": ", msg);
#else
strcpy(state->msg, state->path);
strcat(state->msg, ": ");
strcat(state->msg, msg);
#endif
return;
}
#ifndef INT_MAX
/* portably return maximum value for an int (when limits.h presumed not
available) -- we need to do this to cover cases where 2's complement not
used, since C standard permits 1's complement and sign-bit representations,
otherwise we could just use ((unsigned)-1) >> 1 */
unsigned ZLIB_INTERNAL gz_intmax()
{
unsigned p, q;
p = 1;
do {
q = p;
p <<= 1;
p++;
} while (p > q);
return q >> 1;
}
#endif
deps/zlib/gzread.c 0 → 100644
/* gzread.c -- zlib functions for reading gzip files
* Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
#include "gzguts.h"
/* Local functions */
local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
local int gz_avail OF((gz_statep));
local int gz_look OF((gz_statep));
local int gz_decomp OF((gz_statep));
local int gz_fetch OF((gz_statep));
local int gz_skip OF((gz_statep, z_off64_t));
/* Use read() to load a buffer -- return -1 on error, otherwise 0. Read from
state->fd, and update state->eof, state->err, and state->msg as appropriate.
This function needs to loop on read(), since read() is not guaranteed to
read the number of bytes requested, depending on the type of descriptor. */
local int gz_load(state, buf, len, have)
gz_statep state;
unsigned char *buf;
unsigned len;
unsigned *have;
{
int ret;
*have = 0;
do {
ret = read(state->fd, buf + *have, len - *have);
if (ret <= 0)
break;
*have += ret;
} while (*have < len);
if (ret < 0) {
gz_error(state, Z_ERRNO, zstrerror());
return -1;
}
if (ret == 0)
state->eof = 1;
return 0;
}
/* Load up input buffer and set eof flag if last data loaded -- return -1 on
error, 0 otherwise. Note that the eof flag is set when the end of the input
file is reached, even though there may be unused data in the buffer. Once
that data has been used, no more attempts will be made to read the file.
If strm->avail_in != 0, then the current data is moved to the beginning of
the input buffer, and then the remainder of the buffer is loaded with the
available data from the input file. */
local int gz_avail(state)
gz_statep state;
{
unsigned got;
z_streamp strm = &(state->strm);
if (state->err != Z_OK && state->err != Z_BUF_ERROR)
return -1;
if (state->eof == 0) {
if (strm->avail_in) { /* copy what's there to the start */
unsigned char *p = state->in;
unsigned const char *q = strm->next_in;
unsigned n = strm->avail_in;
do {
*p++ = *q++;
} while (--n);
}
if (gz_load(state, state->in + strm->avail_in,
state->size - strm->avail_in, &got) == -1)
return -1;
strm->avail_in += got;
strm->next_in = state->in;
}
return 0;
}
/* Look for gzip header, set up for inflate or copy. state->x.have must be 0.
If this is the first time in, allocate required memory. state->how will be
left unchanged if there is no more input data available, will be set to COPY
if there is no gzip header and direct copying will be performed, or it will
be set to GZIP for decompression. If direct copying, then leftover input
data from the input buffer will be copied to the output buffer. In that
case, all further file reads will be directly to either the output buffer or
a user buffer. If decompressing, the inflate state will be initialized.
gz_look() will return 0 on success or -1 on failure. */
local int gz_look(state)
gz_statep state;
{
z_streamp strm = &(state->strm);
/* allocate read buffers and inflate memory */
if (state->size == 0) {
/* allocate buffers */
state->in = (unsigned char *)malloc(state->want);
state->out = (unsigned char *)malloc(state->want << 1);
if (state->in == NULL || state->out == NULL) {
if (state->out != NULL)
free(state->out);
if (state->in != NULL)
free(state->in);
gz_error(state, Z_MEM_ERROR, "out of memory");
return -1;
}
state->size = state->want;
/* allocate inflate memory */
state->strm.zalloc = Z_NULL;
state->strm.zfree = Z_NULL;
state->strm.opaque = Z_NULL;
state->strm.avail_in = 0;
state->strm.next_in = Z_NULL;
if (inflateInit2(&(state->strm), 15 + 16) != Z_OK) { /* gunzip */
free(state->out);
free(state->in);
state->size = 0;
gz_error(state, Z_MEM_ERROR, "out of memory");
return -1;
}
}
/* get at least the magic bytes in the input buffer */
if (strm->avail_in < 2) {
if (gz_avail(state) == -1)
return -1;
if (strm->avail_in == 0)
return 0;
}
/* look for gzip magic bytes -- if there, do gzip decoding (note: there is
a logical dilemma here when considering the case of a partially written
gzip file, to wit, if a single 31 byte is written, then we cannot tell
whether this is a single-byte file, or just a partially written gzip
file -- for here we assume that if a gzip file is being written, then
the header will be written in a single operation, so that reading a
single byte is sufficient indication that it is not a gzip file) */
if (strm->avail_in > 1 &&
strm->next_in[0] == 31 && strm->next_in[1] == 139) {
inflateReset(strm);
state->how = GZIP;
state->direct = 0;
return 0;
}
/* no gzip header -- if we were decoding gzip before, then this is trailing
garbage. Ignore the trailing garbage and finish. */
if (state->direct == 0) {
strm->avail_in = 0;
state->eof = 1;
state->x.have = 0;
return 0;
}
/* doing raw i/o, copy any leftover input to output -- this assumes that
the output buffer is larger than the input buffer, which also assures
space for gzungetc() */
state->x.next = state->out;
if (strm->avail_in) {
memcpy(state->x.next, strm->next_in, strm->avail_in);
state->x.have = strm->avail_in;
strm->avail_in = 0;
}
state->how = COPY;
state->direct = 1;
return 0;
}
/* Decompress from input to the provided next_out and avail_out in the state.
On return, state->x.have and state->x.next point to the just decompressed
data. If the gzip stream completes, state->how is reset to LOOK to look for
the next gzip stream or raw data, once state->x.have is depleted. Returns 0
on success, -1 on failure. */
local int gz_decomp(state)
gz_statep state;
{
int ret = Z_OK;
unsigned had;
z_streamp strm = &(state->strm);
/* fill output buffer up to end of deflate stream */
had = strm->avail_out;
do {
/* get more input for inflate() */
if (strm->avail_in == 0 && gz_avail(state) == -1)
return -1;
if (strm->avail_in == 0) {
gz_error(state, Z_BUF_ERROR, "unexpected end of file");
break;
}
/* decompress and handle errors */
ret = inflate(strm, Z_NO_FLUSH);
if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) {
gz_error(state, Z_STREAM_ERROR,
"internal error: inflate stream corrupt");
return -1;
}
if (ret == Z_MEM_ERROR) {
gz_error(state, Z_MEM_ERROR, "out of memory");
return -1;
}
if (ret == Z_DATA_ERROR) { /* deflate stream invalid */
gz_error(state, Z_DATA_ERROR,
strm->msg == NULL ? "compressed data error" : strm->msg);
return -1;
}
} while (strm->avail_out && ret != Z_STREAM_END);
/* update available output */
state->x.have = had - strm->avail_out;
state->x.next = strm->next_out - state->x.have;
/* if the gzip stream completed successfully, look for another */
if (ret == Z_STREAM_END)
state->how = LOOK;
/* good decompression */
return 0;
}
/* Fetch data and put it in the output buffer. Assumes state->x.have is 0.
Data is either copied from the input file or decompressed from the input
file depending on state->how. If state->how is LOOK, then a gzip header is
looked for to determine whether to copy or decompress. Returns -1 on error,
otherwise 0. gz_fetch() will leave state->how as COPY or GZIP unless the
end of the input file has been reached and all data has been processed. */
local int gz_fetch(state)
gz_statep state;
{
z_streamp strm = &(state->strm);
do {
switch(state->how) {
case LOOK: /* -> LOOK, COPY (only if never GZIP), or GZIP */
if (gz_look(state) == -1)
return -1;
if (state->how == LOOK)
return 0;
break;
case COPY: /* -> COPY */
if (gz_load(state, state->out, state->size << 1, &(state->x.have))
== -1)
return -1;
state->x.next = state->out;
return 0;
case GZIP: /* -> GZIP or LOOK (if end of gzip stream) */
strm->avail_out = state->size << 1;
strm->next_out = state->out;
if (gz_decomp(state) == -1)
return -1;
}
} while (state->x.have == 0 && (!state->eof || strm->avail_in));
return 0;
}
/* Skip len uncompressed bytes of output. Return -1 on error, 0 on success. */
local int gz_skip(state, len)
gz_statep state;
z_off64_t len;
{
unsigned n;
/* skip over len bytes or reach end-of-file, whichever comes first */
while (len)
/* skip over whatever is in output buffer */
if (state->x.have) {
n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > len ?
(unsigned)len : state->x.have;
state->x.have -= n;
state->x.next += n;
state->x.pos += n;
len -= n;
}
/* output buffer empty -- return if we're at the end of the input */
else if (state->eof && state->strm.avail_in == 0)
break;
/* need more data to skip -- load up output buffer */
else {
/* get more output, looking for header if required */
if (gz_fetch(state) == -1)
return -1;
}
return 0;
}
/* -- see zlib.h -- */
int ZEXPORT gzread(file, buf, len)
gzFile file;
voidp buf;
unsigned len;
{
unsigned got, n;
gz_statep state;
z_streamp strm;
/* get internal structure */
if (file == NULL)
return -1;
state = (gz_statep)file;
strm = &(state->strm);
/* check that we're reading and that there's no (serious) error */
if (state->mode != GZ_READ ||
(state->err != Z_OK && state->err != Z_BUF_ERROR))
return -1;
/* since an int is returned, make sure len fits in one, otherwise return
with an error (this avoids the flaw in the interface) */
if ((int)len < 0) {
gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
return -1;
}
/* if len is zero, avoid unnecessary operations */
if (len == 0)
return 0;
/* process a skip request */
if (state->seek) {
state->seek = 0;
if (gz_skip(state, state->skip) == -1)
return -1;
}
/* get len bytes to buf, or less than len if at the end */
got = 0;
do {
/* first just try copying data from the output buffer */
if (state->x.have) {
n = state->x.have > len ? len : state->x.have;
memcpy(buf, state->x.next, n);
state->x.next += n;
state->x.have -= n;
}
/* output buffer empty -- return if we're at the end of the input */
else if (state->eof && strm->avail_in == 0) {
state->past = 1; /* tried to read past end */
break;
}
/* need output data -- for small len or new stream load up our output
buffer */
else if (state->how == LOOK || len < (state->size << 1)) {
/* get more output, looking for header if required */
if (gz_fetch(state) == -1)
return -1;
continue; /* no progress yet -- go back to copy above */
/* the copy above assures that we will leave with space in the
output buffer, allowing at least one gzungetc() to succeed */
}
/* large len -- read directly into user buffer */
else if (state->how == COPY) { /* read directly */
if (gz_load(state, (unsigned char *)buf, len, &n) == -1)
return -1;
}
/* large len -- decompress directly into user buffer */
else { /* state->how == GZIP */
strm->avail_out = len;
strm->next_out = (unsigned char *)buf;
if (gz_decomp(state) == -1)
return -1;
n = state->x.have;
state->x.have = 0;
}
/* update progress */
len -= n;
buf = (char *)buf + n;
got += n;
state->x.pos += n;
} while (len);
/* return number of bytes read into user buffer (will fit in int) */
return (int)got;
}
/* -- see zlib.h -- */
#ifdef Z_PREFIX_SET
# undef z_gzgetc
#else
# undef gzgetc
#endif
int ZEXPORT gzgetc(file)
gzFile file;
{
int ret;
unsigned char buf[1];
gz_statep state;
/* get internal structure */
if (file == NULL)
return -1;
state = (gz_statep)file;
/* check that we're reading and that there's no (serious) error */
if (state->mode != GZ_READ ||
(state->err != Z_OK && state->err != Z_BUF_ERROR))
return -1;
/* try output buffer (no need to check for skip request) */
if (state->x.have) {
state->x.have--;
state->x.pos++;
return *(state->x.next)++;
}
/* nothing there -- try gzread() */
ret = gzread(file, buf, 1);
return ret < 1 ? -1 : buf[0];
}
int ZEXPORT gzgetc_(file)
gzFile file;
{
return gzgetc(file);
}
/* -- see zlib.h -- */
int ZEXPORT gzungetc(c, file)
int c;
gzFile file;
{
gz_statep state;
/* get internal structure */
if (file == NULL)
return -1;
state = (gz_statep)file;
/* check that we're reading and that there's no (serious) error */
if (state->mode != GZ_READ ||
(state->err != Z_OK && state->err != Z_BUF_ERROR))
return -1;
/* process a skip request */
if (state->seek) {
state->seek = 0;
if (gz_skip(state, state->skip) == -1)
return -1;
}
/* can't push EOF */
if (c < 0)
return -1;
/* if output buffer empty, put byte at end (allows more pushing) */
if (state->x.have == 0) {
state->x.have = 1;
state->x.next = state->out + (state->size << 1) - 1;
state->x.next[0] = c;
state->x.pos--;
state->past = 0;
return c;
}
/* if no room, give up (must have already done a gzungetc()) */
if (state->x.have == (state->size << 1)) {
gz_error(state, Z_DATA_ERROR, "out of room to push characters");
return -1;
}
/* slide output data if needed and insert byte before existing data */
if (state->x.next == state->out) {
unsigned char *src = state->out + state->x.have;
unsigned char *dest = state->out + (state->size << 1);
while (src > state->out)
*--dest = *--src;
state->x.next = dest;
}
state->x.have++;
state->x.next--;
state->x.next[0] = c;
state->x.pos--;
state->past = 0;
return c;
}
/* -- see zlib.h -- */
char * ZEXPORT gzgets(file, buf, len)
gzFile file;
char *buf;
int len;
{
unsigned left, n;
char *str;
unsigned char *eol;
gz_statep state;
/* check parameters and get internal structure */
if (file == NULL || buf == NULL || len < 1)
return NULL;
state = (gz_statep)file;
/* check that we're reading and that there's no (serious) error */
if (state->mode != GZ_READ ||
(state->err != Z_OK && state->err != Z_BUF_ERROR))
return NULL;
/* process a skip request */
if (state->seek) {
state->seek = 0;
if (gz_skip(state, state->skip) == -1)
return NULL;
}
/* copy output bytes up to new line or len - 1, whichever comes first --
append a terminating zero to the string (we don't check for a zero in
the contents, let the user worry about that) */
str = buf;
left = (unsigned)len - 1;
if (left) do {
/* assure that something is in the output buffer */
if (state->x.have == 0 && gz_fetch(state) == -1)
return NULL; /* error */
if (state->x.have == 0) { /* end of file */
state->past = 1; /* read past end */
break; /* return what we have */
}
/* look for end-of-line in current output buffer */
n = state->x.have > left ? left : state->x.have;
eol = (unsigned char *)memchr(state->x.next, '\n', n);
if (eol != NULL)
n = (unsigned)(eol - state->x.next) + 1;
/* copy through end-of-line, or remainder if not found */
memcpy(buf, state->x.next, n);
state->x.have -= n;
state->x.next += n;
state->x.pos += n;
left -= n;
buf += n;
} while (left && eol == NULL);
/* return terminated string, or if nothing, end of file */
if (buf == str)
return NULL;
buf[0] = 0;
return str;
}
/* -- see zlib.h -- */
int ZEXPORT gzdirect(file)
gzFile file;
{
gz_statep state;
/* get internal structure */
if (file == NULL)
return 0;
state = (gz_statep)file;
/* if the state is not known, but we can find out, then do so (this is
mainly for right after a gzopen() or gzdopen()) */
if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0)
(void)gz_look(state);
/* return 1 if transparent, 0 if processing a gzip stream */
return state->direct;
}
/* -- see zlib.h -- */
int ZEXPORT gzclose_r(file)
gzFile file;
{
int ret, err;
gz_statep state;
/* get internal structure */
if (file == NULL)
return Z_STREAM_ERROR;
state = (gz_statep)file;
/* check that we're reading */
if (state->mode != GZ_READ)
return Z_STREAM_ERROR;
/* free memory and close file */
if (state->size) {
inflateEnd(&(state->strm));
free(state->out);
free(state->in);
}
err = state->err == Z_BUF_ERROR ? Z_BUF_ERROR : Z_OK;
gz_error(state, Z_OK, NULL);
free(state->path);
ret = close(state->fd);
free(state);
return ret ? Z_ERRNO : err;
}
deps/zlib/gzwrite.c 0 → 100644
/* gzwrite.c -- zlib functions for writing gzip files
* Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
#include "gzguts.h"
/* Local functions */
local int gz_init OF((gz_statep));
local int gz_comp OF((gz_statep, int));
local int gz_zero OF((gz_statep, z_off64_t));
/* Initialize state for writing a gzip file. Mark initialization by setting
state->size to non-zero. Return -1 on failure or 0 on success. */
local int gz_init(state)
gz_statep state;
{
int ret;
z_streamp strm = &(state->strm);
/* allocate input buffer */
state->in = (unsigned char *)malloc(state->want);
if (state->in == NULL) {
gz_error(state, Z_MEM_ERROR, "out of memory");
return -1;
}
/* only need output buffer and deflate state if compressing */
if (!state->direct) {
/* allocate output buffer */
state->out = (unsigned char *)malloc(state->want);
if (state->out == NULL) {
free(state->in);
gz_error(state, Z_MEM_ERROR, "out of memory");
return -1;
}
/* allocate deflate memory, set up for gzip compression */
strm->zalloc = Z_NULL;
strm->zfree = Z_NULL;
strm->opaque = Z_NULL;
ret = deflateInit2(strm, state->level, Z_DEFLATED,
MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy);
if (ret != Z_OK) {
free(state->out);
free(state->in);
gz_error(state, Z_MEM_ERROR, "out of memory");
return -1;
}
}
/* mark state as initialized */
state->size = state->want;
/* initialize write buffer if compressing */
if (!state->direct) {
strm->avail_out = state->size;
strm->next_out = state->out;
state->x.next = strm->next_out;
}
return 0;
}
/* Compress whatever is at avail_in and next_in and write to the output file.
Return -1 if there is an error writing to the output file, otherwise 0.
flush is assumed to be a valid deflate() flush value. If flush is Z_FINISH,
then the deflate() state is reset to start a new gzip stream. If gz->direct
is true, then simply write to the output file without compressing, and
ignore flush. */
local int gz_comp(state, flush)
gz_statep state;
int flush;
{
int ret, got;
unsigned have;
z_streamp strm = &(state->strm);
/* allocate memory if this is the first time through */
if (state->size == 0 && gz_init(state) == -1)
return -1;
/* write directly if requested */
if (state->direct) {
got = write(state->fd, strm->next_in, strm->avail_in);
if (got < 0 || (unsigned)got != strm->avail_in) {
gz_error(state, Z_ERRNO, zstrerror());
return -1;
}
strm->avail_in = 0;
return 0;
}
/* run deflate() on provided input until it produces no more output */
ret = Z_OK;
do {
/* write out current buffer contents if full, or if flushing, but if
doing Z_FINISH then don't write until we get to Z_STREAM_END */
if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
(flush != Z_FINISH || ret == Z_STREAM_END))) {
have = (unsigned)(strm->next_out - state->x.next);
if (have && ((got = write(state->fd, state->x.next, have)) < 0 ||
(unsigned)got != have)) {
gz_error(state, Z_ERRNO, zstrerror());
return -1;
}
if (strm->avail_out == 0) {
strm->avail_out = state->size;
strm->next_out = state->out;
}
state->x.next = strm->next_out;
}
/* compress */
have = strm->avail_out;
ret = deflate(strm, flush);
if (ret == Z_STREAM_ERROR) {
gz_error(state, Z_STREAM_ERROR,
"internal error: deflate stream corrupt");
return -1;
}
have -= strm->avail_out;
} while (have);
/* if that completed a deflate stream, allow another to start */
if (flush == Z_FINISH)
deflateReset(strm);
/* all done, no errors */
return 0;
}
/* Compress len zeros to output. Return -1 on error, 0 on success. */
local int gz_zero(state, len)
gz_statep state;
z_off64_t len;
{
int first;
unsigned n;
z_streamp strm = &(state->strm);
/* consume whatever's left in the input buffer */
if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
return -1;
/* compress len zeros (len guaranteed > 0) */
first = 1;
while (len) {
n = GT_OFF(state->size) || (z_off64_t)state->size > len ?
(unsigned)len : state->size;
if (first) {
memset(state->in, 0, n);
first = 0;
}
strm->avail_in = n;
strm->next_in = state->in;
state->x.pos += n;
if (gz_comp(state, Z_NO_FLUSH) == -1)
return -1;
len -= n;
}
return 0;
}
/* -- see zlib.h -- */
int ZEXPORT gzwrite(file, buf, len)
gzFile file;
voidpc buf;
unsigned len;
{
unsigned put = len;
gz_statep state;
z_streamp strm;
/* get internal structure */
if (file == NULL)
return 0;
state = (gz_statep)file;
strm = &(state->strm);
/* check that we're writing and that there's no error */
if (state->mode != GZ_WRITE || state->err != Z_OK)
return 0;
/* since an int is returned, make sure len fits in one, otherwise return
with an error (this avoids the flaw in the interface) */
if ((int)len < 0) {
gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
return 0;
}
/* if len is zero, avoid unnecessary operations */
if (len == 0)
return 0;
/* allocate memory if this is the first time through */
if (state->size == 0 && gz_init(state) == -1)
return 0;
/* check for seek request */
if (state->seek) {
state->seek = 0;
if (gz_zero(state, state->skip) == -1)
return 0;
}
/* for small len, copy to input buffer, otherwise compress directly */
if (len < state->size) {
/* copy to input buffer, compress when full */
do {
unsigned have, copy;
if (strm->avail_in == 0)
strm->next_in = state->in;
have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
copy = state->size - have;
if (copy > len)
copy = len;
memcpy(state->in + have, buf, copy);
strm->avail_in += copy;
state->x.pos += copy;
buf = (const char *)buf + copy;
len -= copy;
if (len && gz_comp(state, Z_NO_FLUSH) == -1)
return 0;
} while (len);
}
else {
/* consume whatever's left in the input buffer */
if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
return 0;
/* directly compress user buffer to file */
strm->avail_in = len;
strm->next_in = (z_const Bytef *)buf;
state->x.pos += len;
if (gz_comp(state, Z_NO_FLUSH) == -1)
return 0;
}
/* input was all buffered or compressed (put will fit in int) */
return (int)put;
}
/* -- see zlib.h -- */
int ZEXPORT gzputc(file, c)
gzFile file;
int c;
{
unsigned have;
unsigned char buf[1];
gz_statep state;
z_streamp strm;
/* get internal structure */
if (file == NULL)
return -1;
state = (gz_statep)file;
strm = &(state->strm);
/* check that we're writing and that there's no error */
if (state->mode != GZ_WRITE || state->err != Z_OK)
return -1;
/* check for seek request */
if (state->seek) {
state->seek = 0;
if (gz_zero(state, state->skip) == -1)
return -1;
}
/* try writing to input buffer for speed (state->size == 0 if buffer not
initialized) */
if (state->size) {
if (strm->avail_in == 0)
strm->next_in = state->in;
have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
if (have < state->size) {
state->in[have] = c;
strm->avail_in++;
state->x.pos++;
return c & 0xff;
}
}
/* no room in buffer or not initialized, use gz_write() */
buf[0] = c;
if (gzwrite(file, buf, 1) != 1)
return -1;
return c & 0xff;
}
/* -- see zlib.h -- */
int ZEXPORT gzputs(file, str)
gzFile file;
const char *str;
{
int ret;
unsigned len;
/* write string */
len = (unsigned)strlen(str);
ret = gzwrite(file, str, len);
return ret == 0 && len != 0 ? -1 : ret;
}
#if defined(STDC) || defined(Z_HAVE_STDARG_H)
#include <stdarg.h>
/* -- see zlib.h -- */
int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va)
{
int size, len;
gz_statep state;
z_streamp strm;
/* get internal structure */
if (file == NULL)
return -1;
state = (gz_statep)file;
strm = &(state->strm);
/* check that we're writing and that there's no error */
if (state->mode != GZ_WRITE || state->err != Z_OK)
return 0;
/* make sure we have some buffer space */
if (state->size == 0 && gz_init(state) == -1)
return 0;
/* check for seek request */
if (state->seek) {
state->seek = 0;
if (gz_zero(state, state->skip) == -1)
return 0;
}
/* consume whatever's left in the input buffer */
if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
return 0;
/* do the printf() into the input buffer, put length in len */
size = (int)(state->size);
state->in[size - 1] = 0;
#ifdef NO_vsnprintf
# ifdef HAS_vsprintf_void
(void)vsprintf((char *)(state->in), format, va);
for (len = 0; len < size; len++)
if (state->in[len] == 0) break;
# else
len = vsprintf((char *)(state->in), format, va);
# endif
#else
# ifdef HAS_vsnprintf_void
(void)vsnprintf((char *)(state->in), size, format, va);
len = strlen((char *)(state->in));
# else
len = vsnprintf((char *)(state->in), size, format, va);
# endif
#endif
/* check that printf() results fit in buffer */
if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
return 0;
/* update buffer and position, defer compression until needed */
strm->avail_in = (unsigned)len;
strm->next_in = state->in;
state->x.pos += len;
return len;
}
int ZEXPORTVA gzprintf(gzFile file, const char *format, ...)
{
va_list va;
int ret;
va_start(va, format);
ret = gzvprintf(file, format, va);
va_end(va);
return ret;
}
#else /* !STDC && !Z_HAVE_STDARG_H */
/* -- see zlib.h -- */
int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
gzFile file;
const char *format;
int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
{
int size, len;
gz_statep state;
z_streamp strm;
/* get internal structure */
if (file == NULL)
return -1;
state = (gz_statep)file;
strm = &(state->strm);
/* check that can really pass pointer in ints */
if (sizeof(int) != sizeof(void *))
return 0;
/* check that we're writing and that there's no error */
if (state->mode != GZ_WRITE || state->err != Z_OK)
return 0;
/* make sure we have some buffer space */
if (state->size == 0 && gz_init(state) == -1)
return 0;
/* check for seek request */
if (state->seek) {
state->seek = 0;
if (gz_zero(state, state->skip) == -1)
return 0;
}
/* consume whatever's left in the input buffer */
if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
return 0;
/* do the printf() into the input buffer, put length in len */
size = (int)(state->size);
state->in[size - 1] = 0;
#ifdef NO_snprintf
# ifdef HAS_sprintf_void
sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
for (len = 0; len < size; len++)
if (state->in[len] == 0) break;
# else
len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
# endif
#else
# ifdef HAS_snprintf_void
snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8,
a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
len = strlen((char *)(state->in));
# else
len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6,
a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18,
a19, a20);
# endif
#endif
/* check that printf() results fit in buffer */
if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
return 0;
/* update buffer and position, defer compression until needed */
strm->avail_in = (unsigned)len;
strm->next_in = state->in;
state->x.pos += len;
return len;
}
#endif
/* -- see zlib.h -- */
int ZEXPORT gzflush(file, flush)
gzFile file;
int flush;
{
gz_statep state;
/* get internal structure */
if (file == NULL)
return -1;
state = (gz_statep)file;
/* check that we're writing and that there's no error */
if (state->mode != GZ_WRITE || state->err != Z_OK)
return Z_STREAM_ERROR;
/* check flush parameter */
if (flush < 0 || flush > Z_FINISH)
return Z_STREAM_ERROR;
/* check for seek request */
if (state->seek) {
state->seek = 0;
if (gz_zero(state, state->skip) == -1)
return -1;
}
/* compress remaining data with requested flush */
gz_comp(state, flush);
return state->err;
}
/* -- see zlib.h -- */
int ZEXPORT gzsetparams(file, level, strategy)
gzFile file;
int level;
int strategy;
{
gz_statep state;
z_streamp strm;
/* get internal structure */
if (file == NULL)
return Z_STREAM_ERROR;
state = (gz_statep)file;
strm = &(state->strm);
/* check that we're writing and that there's no error */
if (state->mode != GZ_WRITE || state->err != Z_OK)
return Z_STREAM_ERROR;
/* if no change is requested, then do nothing */
if (level == state->level && strategy == state->strategy)
return Z_OK;
/* check for seek request */
if (state->seek) {
state->seek = 0;
if (gz_zero(state, state->skip) == -1)
return -1;
}
/* change compression parameters for subsequent input */
if (state->size) {
/* flush previous input with previous parameters before changing */
if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1)
return state->err;
deflateParams(strm, level, strategy);
}
state->level = level;
state->strategy = strategy;
return Z_OK;
}
/* -- see zlib.h -- */
int ZEXPORT gzclose_w(file)
gzFile file;
{
int ret = Z_OK;
gz_statep state;
/* get internal structure */
if (file == NULL)
return Z_STREAM_ERROR;
state = (gz_statep)file;
/* check that we're writing */
if (state->mode != GZ_WRITE)
return Z_STREAM_ERROR;
/* check for seek request */
if (state->seek) {
state->seek = 0;
if (gz_zero(state, state->skip) == -1)
ret = state->err;
}
/* flush, free memory, and close file */
if (gz_comp(state, Z_FINISH) == -1)
ret = state->err;
if (state->size) {
if (!state->direct) {
(void)deflateEnd(&(state->strm));
free(state->out);
}
free(state->in);
}
gz_error(state, Z_OK, NULL);
free(state->path);
if (close(state->fd) == -1)
ret = Z_ERRNO;
free(state);
return ret;
}
deps/zlib/infback.c 0 → 100644
/* infback.c -- inflate using a call-back interface
* Copyright (C) 1995-2011 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/*
This code is largely copied from inflate.c. Normally either infback.o or
inflate.o would be linked into an application--not both. The interface
with inffast.c is retained so that optimized assembler-coded versions of
inflate_fast() can be used with either inflate.c or infback.c.
*/
#include "zutil.h"
#include "inftrees.h"
#include "inflate.h"
#include "inffast.h"
/* function prototypes */
local void fixedtables OF((struct inflate_state FAR *state));
/*
strm provides memory allocation functions in zalloc and zfree, or
Z_NULL to use the library memory allocation functions.
windowBits is in the range 8..15, and window is a user-supplied
window and output buffer that is 2**windowBits bytes.
*/
int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size)
z_streamp strm;
int windowBits;
unsigned char FAR *window;
const char *version;
int stream_size;
{
struct inflate_state FAR *state;
if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
stream_size != (int)(sizeof(z_stream)))
return Z_VERSION_ERROR;
if (strm == Z_NULL || window == Z_NULL ||
windowBits < 8 || windowBits > 15)
return Z_STREAM_ERROR;
strm->msg = Z_NULL; /* in case we return an error */
if (strm->zalloc == (alloc_func)0) {
#ifdef Z_SOLO
return Z_STREAM_ERROR;
#else
strm->zalloc = zcalloc;
strm->opaque = (voidpf)0;
#endif
}
if (strm->zfree == (free_func)0)
#ifdef Z_SOLO
return Z_STREAM_ERROR;
#else
strm->zfree = zcfree;
#endif
state = (struct inflate_state FAR *)ZALLOC(strm, 1,
sizeof(struct inflate_state));
if (state == Z_NULL) return Z_MEM_ERROR;
Tracev((stderr, "inflate: allocated\n"));
strm->state = (struct internal_state FAR *)state;
state->dmax = 32768U;
state->wbits = windowBits;
state->wsize = 1U << windowBits;
state->window = window;
state->wnext = 0;
state->whave = 0;
return Z_OK;
}
/*
Return state with length and distance decoding tables and index sizes set to
fixed code decoding. Normally this returns fixed tables from inffixed.h.
If BUILDFIXED is defined, then instead this routine builds the tables the
first time it's called, and returns those tables the first time and
thereafter. This reduces the size of the code by about 2K bytes, in
exchange for a little execution time. However, BUILDFIXED should not be
used for threaded applications, since the rewriting of the tables and virgin
may not be thread-safe.
*/
local void fixedtables(state)
struct inflate_state FAR *state;
{
#ifdef BUILDFIXED
static int virgin = 1;
static code *lenfix, *distfix;
static code fixed[544];
/* build fixed huffman tables if first call (may not be thread safe) */
if (virgin) {
unsigned sym, bits;
static code *next;
/* literal/length table */
sym = 0;
while (sym < 144) state->lens[sym++] = 8;
while (sym < 256) state->lens[sym++] = 9;
while (sym < 280) state->lens[sym++] = 7;
while (sym < 288) state->lens[sym++] = 8;
next = fixed;
lenfix = next;
bits = 9;
inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
/* distance table */
sym = 0;
while (sym < 32) state->lens[sym++] = 5;
distfix = next;
bits = 5;
inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
/* do this just once */
virgin = 0;
}
#else /* !BUILDFIXED */
# include "inffixed.h"
#endif /* BUILDFIXED */
state->lencode = lenfix;
state->lenbits = 9;
state->distcode = distfix;
state->distbits = 5;
}
/* Macros for inflateBack(): */
/* Load returned state from inflate_fast() */
#define LOAD() \
do { \
put = strm->next_out; \
left = strm->avail_out; \
next = strm->next_in; \
have = strm->avail_in; \
hold = state->hold; \
bits = state->bits; \
} while (0)
/* Set state from registers for inflate_fast() */
#define RESTORE() \
do { \
strm->next_out = put; \
strm->avail_out = left; \
strm->next_in = next; \
strm->avail_in = have; \
state->hold = hold; \
state->bits = bits; \
} while (0)
/* Clear the input bit accumulator */
#define INITBITS() \
do { \
hold = 0; \
bits = 0; \
} while (0)
/* Assure that some input is available. If input is requested, but denied,
then return a Z_BUF_ERROR from inflateBack(). */
#define PULL() \
do { \
if (have == 0) { \
have = in(in_desc, &next); \
if (have == 0) { \
next = Z_NULL; \
ret = Z_BUF_ERROR; \
goto inf_leave; \
} \
} \
} while (0)
/* Get a byte of input into the bit accumulator, or return from inflateBack()
with an error if there is no input available. */
#define PULLBYTE() \
do { \
PULL(); \
have--; \
hold += (unsigned long)(*next++) << bits; \
bits += 8; \
} while (0)
/* Assure that there are at least n bits in the bit accumulator. If there is
not enough available input to do that, then return from inflateBack() with
an error. */
#define NEEDBITS(n) \
do { \
while (bits < (unsigned)(n)) \
PULLBYTE(); \
} while (0)
/* Return the low n bits of the bit accumulator (n < 16) */
#define BITS(n) \
((unsigned)hold & ((1U << (n)) - 1))
/* Remove n bits from the bit accumulator */
#define DROPBITS(n) \
do { \
hold >>= (n); \
bits -= (unsigned)(n); \
} while (0)
/* Remove zero to seven bits as needed to go to a byte boundary */
#define BYTEBITS() \
do { \
hold >>= bits & 7; \
bits -= bits & 7; \
} while (0)
/* Assure that some output space is available, by writing out the window
if it's full. If the write fails, return from inflateBack() with a
Z_BUF_ERROR. */
#define ROOM() \
do { \
if (left == 0) { \
put = state->window; \
left = state->wsize; \
state->whave = left; \
if (out(out_desc, put, left)) { \
ret = Z_BUF_ERROR; \
goto inf_leave; \
} \
} \
} while (0)
/*
strm provides the memory allocation functions and window buffer on input,
and provides information on the unused input on return. For Z_DATA_ERROR
returns, strm will also provide an error message.
in() and out() are the call-back input and output functions. When
inflateBack() needs more input, it calls in(). When inflateBack() has
filled the window with output, or when it completes with data in the
window, it calls out() to write out the data. The application must not
change the provided input until in() is called again or inflateBack()
returns. The application must not change the window/output buffer until
inflateBack() returns.
in() and out() are called with a descriptor parameter provided in the
inflateBack() call. This parameter can be a structure that provides the
information required to do the read or write, as well as accumulated
information on the input and output such as totals and check values.
in() should return zero on failure. out() should return non-zero on
failure. If either in() or out() fails, than inflateBack() returns a
Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it
was in() or out() that caused in the error. Otherwise, inflateBack()
returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
error, or Z_MEM_ERROR if it could not allocate memory for the state.
inflateBack() can also return Z_STREAM_ERROR if the input parameters
are not correct, i.e. strm is Z_NULL or the state was not initialized.
*/
int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc)
z_streamp strm;
in_func in;
void FAR *in_desc;
out_func out;
void FAR *out_desc;
{
struct inflate_state FAR *state;
z_const unsigned char FAR *next; /* next input */
unsigned char FAR *put; /* next output */
unsigned have, left; /* available input and output */
unsigned long hold; /* bit buffer */
unsigned bits; /* bits in bit buffer */
unsigned copy; /* number of stored or match bytes to copy */
unsigned char FAR *from; /* where to copy match bytes from */
code here; /* current decoding table entry */
code last; /* parent table entry */
unsigned len; /* length to copy for repeats, bits to drop */
int ret; /* return code */
static const unsigned short order[19] = /* permutation of code lengths */
{16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
/* Check that the strm exists and that the state was initialized */
if (strm == Z_NULL || strm->state == Z_NULL)
return Z_STREAM_ERROR;
state = (struct inflate_state FAR *)strm->state;
/* Reset the state */
strm->msg = Z_NULL;
state->mode = TYPE;
state->last = 0;
state->whave = 0;
next = strm->next_in;
have = next != Z_NULL ? strm->avail_in : 0;
hold = 0;
bits = 0;
put = state->window;
left = state->wsize;
/* Inflate until end of block marked as last */
for (;;)
switch (state->mode) {
case TYPE:
/* determine and dispatch block type */
if (state->last) {
BYTEBITS();
state->mode = DONE;
break;
}
NEEDBITS(3);
state->last = BITS(1);
DROPBITS(1);
switch (BITS(2)) {
case 0: /* stored block */
Tracev((stderr, "inflate: stored block%s\n",
state->last ? " (last)" : ""));
state->mode = STORED;
break;
case 1: /* fixed block */
fixedtables(state);
Tracev((stderr, "inflate: fixed codes block%s\n",
state->last ? " (last)" : ""));
state->mode = LEN; /* decode codes */
break;
case 2: /* dynamic block */
Tracev((stderr, "inflate: dynamic codes block%s\n",
state->last ? " (last)" : ""));
state->mode = TABLE;
break;
case 3:
strm->msg = (char *)"invalid block type";
state->mode = BAD;
}
DROPBITS(2);
break;
case STORED:
/* get and verify stored block length */
BYTEBITS(); /* go to byte boundary */
NEEDBITS(32);
if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
strm->msg = (char *)"invalid stored block lengths";
state->mode = BAD;
break;
}
state->length = (unsigned)hold & 0xffff;
Tracev((stderr, "inflate: stored length %u\n",
state->length));
INITBITS();
/* copy stored block from input to output */
while (state->length != 0) {
copy = state->length;
PULL();
ROOM();
if (copy > have) copy = have;
if (copy > left) copy = left;
zmemcpy(put, next, copy);
have -= copy;
next += copy;
left -= copy;
put += copy;
state->length -= copy;
}
Tracev((stderr, "inflate: stored end\n"));
state->mode = TYPE;
break;
case TABLE:
/* get dynamic table entries descriptor */
NEEDBITS(14);
state->nlen = BITS(5) + 257;
DROPBITS(5);
state->ndist = BITS(5) + 1;
DROPBITS(5);
state->ncode = BITS(4) + 4;
DROPBITS(4);
#ifndef PKZIP_BUG_WORKAROUND
if (state->nlen > 286 || state->ndist > 30) {
strm->msg = (char *)"too many length or distance symbols";
state->mode = BAD;
break;
}
#endif
Tracev((stderr, "inflate: table sizes ok\n"));
/* get code length code lengths (not a typo) */
state->have = 0;
while (state->have < state->ncode) {
NEEDBITS(3);
state->lens[order[state->have++]] = (unsigned short)BITS(3);
DROPBITS(3);
}
while (state->have < 19)
state->lens[order[state->have++]] = 0;
state->next = state->codes;
state->lencode = (code const FAR *)(state->next);
state->lenbits = 7;
ret = inflate_table(CODES, state->lens, 19, &(state->next),
&(state->lenbits), state->work);
if (ret) {
strm->msg = (char *)"invalid code lengths set";
state->mode = BAD;
break;
}
Tracev((stderr, "inflate: code lengths ok\n"));
/* get length and distance code code lengths */
state->have = 0;
while (state->have < state->nlen + state->ndist) {
for (;;) {
here = state->lencode[BITS(state->lenbits)];
if ((unsigned)(here.bits) <= bits) break;
PULLBYTE();
}
if (here.val < 16) {
DROPBITS(here.bits);
state->lens[state->have++] = here.val;
}
else {
if (here.val == 16) {
NEEDBITS(here.bits + 2);
DROPBITS(here.bits);
if (state->have == 0) {
strm->msg = (char *)"invalid bit length repeat";
state->mode = BAD;
break;
}
len = (unsigned)(state->lens[state->have - 1]);
copy = 3 + BITS(2);
DROPBITS(2);
}
else if (here.val == 17) {
NEEDBITS(here.bits + 3);
DROPBITS(here.bits);
len = 0;
copy = 3 + BITS(3);
DROPBITS(3);
}
else {
NEEDBITS(here.bits + 7);
DROPBITS(here.bits);
len = 0;
copy = 11 + BITS(7);
DROPBITS(7);
}
if (state->have + copy > state->nlen + state->ndist) {
strm->msg = (char *)"invalid bit length repeat";
state->mode = BAD;
break;
}
while (copy--)
state->lens[state->have++] = (unsigned short)len;
}
}
/* handle error breaks in while */
if (state->mode == BAD) break;
/* check for end-of-block code (better have one) */
if (state->lens[256] == 0) {
strm->msg = (char *)"invalid code -- missing end-of-block";
state->mode = BAD;
break;
}
/* build code tables -- note: do not change the lenbits or distbits
values here (9 and 6) without reading the comments in inftrees.h
concerning the ENOUGH constants, which depend on those values */
state->next = state->codes;
state->lencode = (code const FAR *)(state->next);
state->lenbits = 9;
ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
&(state->lenbits), state->work);
if (ret) {
strm->msg = (char *)"invalid literal/lengths set";
state->mode = BAD;
break;
}
state->distcode = (code const FAR *)(state->next);
state->distbits = 6;
ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
&(state->next), &(state->distbits), state->work);
if (ret) {
strm->msg = (char *)"invalid distances set";
state->mode = BAD;
break;
}
Tracev((stderr, "inflate: codes ok\n"));
state->mode = LEN;
case LEN:
/* use inflate_fast() if we have enough input and output */
if (have >= 6 && left >= 258) {
RESTORE();
if (state->whave < state->wsize)
state->whave = state->wsize - left;
inflate_fast(strm, state->wsize);
LOAD();
break;
}
/* get a literal, length, or end-of-block code */
for (;;) {
here = state->lencode[BITS(state->lenbits)];
if ((unsigned)(here.bits) <= bits) break;
PULLBYTE();
}
if (here.op && (here.op & 0xf0) == 0) {
last = here;
for (;;) {
here = state->lencode[last.val +
(BITS(last.bits + last.op) >> last.bits)];
if ((unsigned)(last.bits + here.bits) <= bits) break;
PULLBYTE();
}
DROPBITS(last.bits);
}
DROPBITS(here.bits);
state->length = (unsigned)here.val;
/* process literal */
if (here.op == 0) {
Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
"inflate: literal '%c'\n" :
"inflate: literal 0x%02x\n", here.val));
ROOM();
*put++ = (unsigned char)(state->length);
left--;
state->mode = LEN;
break;
}
/* process end of block */
if (here.op & 32) {
Tracevv((stderr, "inflate: end of block\n"));
state->mode = TYPE;
break;
}
/* invalid code */
if (here.op & 64) {
strm->msg = (char *)"invalid literal/length code";
state->mode = BAD;
break;
}
/* length code -- get extra bits, if any */
state->extra = (unsigned)(here.op) & 15;
if (state->extra != 0) {
NEEDBITS(state->extra);
state->length += BITS(state->extra);
DROPBITS(state->extra);
}
Tracevv((stderr, "inflate: length %u\n", state->length));
/* get distance code */
for (;;) {
here = state->distcode[BITS(state->distbits)];
if ((unsigned)(here.bits) <= bits) break;
PULLBYTE();
}
if ((here.op & 0xf0) == 0) {
last = here;
for (;;) {
here = state->distcode[last.val +
(BITS(last.bits + last.op) >> last.bits)];
if ((unsigned)(last.bits + here.bits) <= bits) break;
PULLBYTE();
}
DROPBITS(last.bits);
}
DROPBITS(here.bits);
if (here.op & 64) {
strm->msg = (char *)"invalid distance code";
state->mode = BAD;
break;
}
state->offset = (unsigned)here.val;
/* get distance extra bits, if any */
state->extra = (unsigned)(here.op) & 15;
if (state->extra != 0) {
NEEDBITS(state->extra);
state->offset += BITS(state->extra);
DROPBITS(state->extra);
}
if (state->offset > state->wsize - (state->whave < state->wsize ?
left : 0)) {
strm->msg = (char *)"invalid distance too far back";
state->mode = BAD;
break;
}
Tracevv((stderr, "inflate: distance %u\n", state->offset));
/* copy match from window to output */
do {
ROOM();
copy = state->wsize - state->offset;
if (copy < left) {
from = put + copy;
copy = left - copy;
}
else {
from = put - state->offset;
copy = left;
}
if (copy > state->length) copy = state->length;
state->length -= copy;
left -= copy;
do {
*put++ = *from++;
} while (--copy);
} while (state->length != 0);
break;
case DONE:
/* inflate stream terminated properly -- write leftover output */
ret = Z_STREAM_END;
if (left < state->wsize) {
if (out(out_desc, state->window, state->wsize - left))
ret = Z_BUF_ERROR;
}
goto inf_leave;
case BAD:
ret = Z_DATA_ERROR;
goto inf_leave;
default: /* can't happen, but makes compilers happy */
ret = Z_STREAM_ERROR;
goto inf_leave;
}
/* Return unused input */
inf_leave:
strm->next_in = next;
strm->avail_in = have;
return ret;
}
int ZEXPORT inflateBackEnd(strm)
z_streamp strm;
{
if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
return Z_STREAM_ERROR;
ZFREE(strm, strm->state);
strm->state = Z_NULL;
Tracev((stderr, "inflate: end\n"));
return Z_OK;
}
deps/zlib/inffast.c
/* inffast.c -- fast decoding
* Copyright (C) 1995-2008, 2010 Mark Adler
* Copyright (C) 1995-2008, 2010, 2013 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -69,8 +69,8 @@ z_streamp strm;
unsigned start; /* inflate()'s starting value for strm->avail_out */
{
struct inflate_state FAR *state;
unsigned char FAR *in; /* local strm->next_in */
unsigned char FAR *last; /* while in < last, enough input available */
z_const unsigned char FAR *in; /* local strm->next_in */
z_const unsigned char FAR *last; /* have enough input while in < last */
unsigned char FAR *out; /* local strm->next_out */
unsigned char FAR *beg; /* inflate()'s initial strm->next_out */
unsigned char FAR *end; /* while out < end, enough space available */
......
deps/zlib/inffixed.h
......@@ -2,9 +2,9 @@
* Generated automatically by makefixed().
*/
/* WARNING: this file should *not* be used by applications. It
is part of the implementation of the compression library and
is subject to change. Applications should only use zlib.h.
/* WARNING: this file should *not* be used by applications.
It is part of the implementation of this library and is
subject to change. Applications should only use zlib.h.
*/
static const code lenfix[512] = {
......
deps/zlib/inflate.c
/* inflate.c -- zlib decompression
* Copyright (C) 1995-2010 Mark Adler
* Copyright (C) 1995-2012 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -93,14 +93,15 @@
/* function prototypes */
local void fixedtables OF((struct inflate_state FAR *state));
local int updatewindow OF((z_streamp strm, unsigned out));
local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
unsigned copy));
#ifdef BUILDFIXED
void makefixed OF((void));
#endif
local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf,
local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
unsigned len));
int ZEXPORT inflateReset(strm)
int ZEXPORT inflateResetKeep(strm)
z_streamp strm;
{
struct inflate_state FAR *state;
......@@ -109,15 +110,13 @@ z_streamp strm;
state = (struct inflate_state FAR *)strm->state;
strm->total_in = strm->total_out = state->total = 0;
strm->msg = Z_NULL;
strm->adler = 1; /* to support ill-conceived Java test suite */
if (state->wrap) /* to support ill-conceived Java test suite */
strm->adler = state->wrap & 1;
state->mode = HEAD;
state->last = 0;
state->havedict = 0;
state->dmax = 32768U;
state->head = Z_NULL;
state->wsize = 0;
state->whave = 0;
state->wnext = 0;
state->hold = 0;
state->bits = 0;
state->lencode = state->distcode = state->next = state->codes;
......@@ -127,6 +126,19 @@ z_streamp strm;
return Z_OK;
}
int ZEXPORT inflateReset(strm)
z_streamp strm;
{
struct inflate_state FAR *state;
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
state = (struct inflate_state FAR *)strm->state;
state->wsize = 0;
state->whave = 0;
state->wnext = 0;
return inflateResetKeep(strm);
}
int ZEXPORT inflateReset2(strm, windowBits)
z_streamp strm;
int windowBits;
......@@ -180,10 +192,19 @@ int stream_size;
if (strm == Z_NULL) return Z_STREAM_ERROR;
strm->msg = Z_NULL; /* in case we return an error */
if (strm->zalloc == (alloc_func)0) {
#ifdef Z_SOLO
return Z_STREAM_ERROR;
#else
strm->zalloc = zcalloc;
strm->opaque = (voidpf)0;
#endif
}
if (strm->zfree == (free_func)0) strm->zfree = zcfree;
if (strm->zfree == (free_func)0)
#ifdef Z_SOLO
return Z_STREAM_ERROR;
#else
strm->zfree = zcfree;
#endif
state = (struct inflate_state FAR *)
ZALLOC(strm, 1, sizeof(struct inflate_state));
if (state == Z_NULL) return Z_MEM_ERROR;
......@@ -321,8 +342,8 @@ void makefixed()
low = 0;
for (;;) {
if ((low % 7) == 0) printf("\n ");
printf("{%u,%u,%d}", state.lencode[low].op, state.lencode[low].bits,
state.lencode[low].val);
printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op,
state.lencode[low].bits, state.lencode[low].val);
if (++low == size) break;
putchar(',');
}
......@@ -355,12 +376,13 @@ void makefixed()
output will fall in the output data, making match copies simpler and faster.
The advantage may be dependent on the size of the processor's data caches.
*/
local int updatewindow(strm, out)
local int updatewindow(strm, end, copy)
z_streamp strm;
unsigned out;
const Bytef *end;
unsigned copy;
{
struct inflate_state FAR *state;
unsigned copy, dist;
unsigned dist;
state = (struct inflate_state FAR *)strm->state;
......@@ -380,19 +402,18 @@ unsigned out;
}
/* copy state->wsize or less output bytes into the circular window */
copy = out - strm->avail_out;
if (copy >= state->wsize) {
zmemcpy(state->window, strm->next_out - state->wsize, state->wsize);
zmemcpy(state->window, end - state->wsize, state->wsize);
state->wnext = 0;
state->whave = state->wsize;
}
else {
dist = state->wsize - state->wnext;
if (dist > copy) dist = copy;
zmemcpy(state->window + state->wnext, strm->next_out - copy, dist);
zmemcpy(state->window + state->wnext, end - copy, dist);
copy -= dist;
if (copy) {
zmemcpy(state->window, strm->next_out - copy, copy);
zmemcpy(state->window, end - copy, copy);
state->wnext = copy;
state->whave = state->wsize;
}
......@@ -499,11 +520,6 @@ unsigned out;
bits -= bits & 7; \
} while (0)
/* Reverse the bytes in a 32-bit value */
#define REVERSE(q) \
((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
(((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
/*
inflate() uses a state machine to process as much input data and generate as
much output data as possible before returning. The state machine is
......@@ -591,7 +607,7 @@ z_streamp strm;
int flush;
{
struct inflate_state FAR *state;
unsigned char FAR *next; /* next input */
z_const unsigned char FAR *next; /* next input */
unsigned char FAR *put; /* next output */
unsigned have, left; /* available input and output */
unsigned long hold; /* bit buffer */
......@@ -797,7 +813,7 @@ int flush;
#endif
case DICTID:
NEEDBITS(32);
strm->adler = state->check = REVERSE(hold);
strm->adler = state->check = ZSWAP32(hold);
INITBITS();
state->mode = DICT;
case DICT:
......@@ -905,7 +921,7 @@ int flush;
while (state->have < 19)
state->lens[order[state->have++]] = 0;
state->next = state->codes;
state->lencode = (code const FAR *)(state->next);
state->lencode = (const code FAR *)(state->next);
state->lenbits = 7;
ret = inflate_table(CODES, state->lens, 19, &(state->next),
&(state->lenbits), state->work);
......@@ -925,7 +941,6 @@ int flush;
PULLBYTE();
}
if (here.val < 16) {
NEEDBITS(here.bits);
DROPBITS(here.bits);
state->lens[state->have++] = here.val;
}
......@@ -980,7 +995,7 @@ int flush;
values here (9 and 6) without reading the comments in inftrees.h
concerning the ENOUGH constants, which depend on those values */
state->next = state->codes;
state->lencode = (code const FAR *)(state->next);
state->lencode = (const code FAR *)(state->next);
state->lenbits = 9;
ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
&(state->lenbits), state->work);
......@@ -989,7 +1004,7 @@ int flush;
state->mode = BAD;
break;
}
state->distcode = (code const FAR *)(state->next);
state->distcode = (const code FAR *)(state->next);
state->distbits = 6;
ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
&(state->next), &(state->distbits), state->work);
......@@ -1170,7 +1185,7 @@ int flush;
#ifdef GUNZIP
state->flags ? hold :
#endif
REVERSE(hold)) != state->check) {
ZSWAP32(hold)) != state->check) {
strm->msg = (char *)"incorrect data check";
state->mode = BAD;
break;
......@@ -1214,8 +1229,9 @@ int flush;
*/
inf_leave:
RESTORE();
if (state->wsize || (state->mode < CHECK && out != strm->avail_out))
if (updatewindow(strm, out)) {
if (state->wsize || (out != strm->avail_out && state->mode < BAD &&
(state->mode < CHECK || flush != Z_FINISH)))
if (updatewindow(strm, strm->next_out, out - strm->avail_out)) {
state->mode = MEM;
return Z_MEM_ERROR;
}
......@@ -1249,13 +1265,37 @@ z_streamp strm;
return Z_OK;
}
int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength)
z_streamp strm;
Bytef *dictionary;
uInt *dictLength;
{
struct inflate_state FAR *state;
/* check state */
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
state = (struct inflate_state FAR *)strm->state;
/* copy dictionary */
if (state->whave && dictionary != Z_NULL) {
zmemcpy(dictionary, state->window + state->wnext,
state->whave - state->wnext);
zmemcpy(dictionary + state->whave - state->wnext,
state->window, state->wnext);
}
if (dictLength != Z_NULL)
*dictLength = state->whave;
return Z_OK;
}
int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
z_streamp strm;
const Bytef *dictionary;
uInt dictLength;
{
struct inflate_state FAR *state;
unsigned long id;
unsigned long dictid;
int ret;
/* check state */
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
......@@ -1263,29 +1303,21 @@ uInt dictLength;
if (state->wrap != 0 && state->mode != DICT)
return Z_STREAM_ERROR;
/* check for correct dictionary id */
/* check for correct dictionary identifier */
if (state->mode == DICT) {
id = adler32(0L, Z_NULL, 0);
id = adler32(id, dictionary, dictLength);
if (id != state->check)
dictid = adler32(0L, Z_NULL, 0);
dictid = adler32(dictid, dictionary, dictLength);
if (dictid != state->check)
return Z_DATA_ERROR;
}
/* copy dictionary to window */
if (updatewindow(strm, strm->avail_out)) {
/* copy dictionary to window using updatewindow(), which will amend the
existing dictionary if appropriate */
ret = updatewindow(strm, dictionary + dictLength, dictLength);
if (ret) {
state->mode = MEM;
return Z_MEM_ERROR;
}
if (dictLength > state->wsize) {
zmemcpy(state->window, dictionary + dictLength - state->wsize,
state->wsize);
state->whave = state->wsize;
}
else {
zmemcpy(state->window + state->wsize - dictLength, dictionary,
dictLength);
state->whave = dictLength;
}
state->havedict = 1;
Tracev((stderr, "inflate: dictionary set\n"));
return Z_OK;
......@@ -1321,7 +1353,7 @@ gz_headerp head;
*/
local unsigned syncsearch(have, buf, len)
unsigned FAR *have;
unsigned char FAR *buf;
const unsigned char FAR *buf;
unsigned len;
{
unsigned got;
......@@ -1433,8 +1465,8 @@ z_streamp source;
}
/* copy state */
zmemcpy(dest, source, sizeof(z_stream));
zmemcpy(copy, state, sizeof(struct inflate_state));
zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state));
if (state->lencode >= state->codes &&
state->lencode <= state->codes + ENOUGH - 1) {
copy->lencode = copy->codes + (state->lencode - state->codes);
......
deps/zlib/inftrees.c
/* inftrees.c -- generate Huffman trees for efficient decoding
* Copyright (C) 1995-2010 Mark Adler
* Copyright (C) 1995-2013 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate_copyright[] =
" inflate 1.2.5 Copyright 1995-2010 Mark Adler ";
" inflate 1.2.8 Copyright 1995-2013 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
......@@ -62,7 +62,7 @@ unsigned short FAR *work;
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 73, 195};
19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 78};
static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
......@@ -208,8 +208,8 @@ unsigned short FAR *work;
mask = used - 1; /* mask for comparing low */
/* check available table space */
if ((type == LENS && used >= ENOUGH_LENS) ||
(type == DISTS && used >= ENOUGH_DISTS))
if ((type == LENS && used > ENOUGH_LENS) ||
(type == DISTS && used > ENOUGH_DISTS))
return 1;
/* process all codes and make table entries */
......@@ -277,8 +277,8 @@ unsigned short FAR *work;
/* check for enough space */
used += 1U << curr;
if ((type == LENS && used >= ENOUGH_LENS) ||
(type == DISTS && used >= ENOUGH_DISTS))
if ((type == LENS && used > ENOUGH_LENS) ||
(type == DISTS && used > ENOUGH_DISTS))
return 1;
/* point entry in root table to sub-table */
......@@ -289,38 +289,14 @@ unsigned short FAR *work;
}
}
/*
Fill in rest of table for incomplete codes. This loop is similar to the
loop above in incrementing huff for table indices. It is assumed that
len is equal to curr + drop, so there is no loop needed to increment
through high index bits. When the current sub-table is filled, the loop
drops back to the root table to fill in any remaining entries there.
*/
here.op = (unsigned char)64; /* invalid code marker */
here.bits = (unsigned char)(len - drop);
here.val = (unsigned short)0;
while (huff != 0) {
/* when done with sub-table, drop back to root table */
if (drop != 0 && (huff & mask) != low) {
drop = 0;
len = root;
next = *table;
here.bits = (unsigned char)len;
}
/* put invalid code marker in table */
next[huff >> drop] = here;
/* backwards increment the len-bit code huff */
incr = 1U << (len - 1);
while (huff & incr)
incr >>= 1;
if (incr != 0) {
huff &= incr - 1;
huff += incr;
}
else
huff = 0;
/* fill in remaining table entry if code is incomplete (guaranteed to have
at most one remaining entry, since if the code is incomplete, the
maximum code length that was allowed to get this far is one bit) */
if (huff != 0) {
here.op = (unsigned char)64; /* invalid code marker */
here.bits = (unsigned char)(len - drop);
here.val = (unsigned short)0;
next[huff] = here;
}
/* set return parameters */
......
deps/zlib/trees.c
/* trees.c -- output deflated data using Huffman coding
* Copyright (C) 1995-2010 Jean-loup Gailly
* Copyright (C) 1995-2012 Jean-loup Gailly
* detect_data_type() function provided freely by Cosmin Truta, 2006
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -74,11 +74,6 @@ local const uch bl_order[BL_CODES]
* probability, to avoid transmitting the lengths for unused bit length codes.
*/
#define Buf_size (8 * 2*sizeof(char))
/* Number of bits used within bi_buf. (bi_buf might be implemented on
* more than 16 bits on some systems.)
*/
/* ===========================================================================
* Local data. These are initialized only once.
*/
......@@ -151,8 +146,8 @@ local void send_tree OF((deflate_state *s, ct_data *tree, int max_code));
local int build_bl_tree OF((deflate_state *s));
local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
int blcodes));
local void compress_block OF((deflate_state *s, ct_data *ltree,
ct_data *dtree));
local void compress_block OF((deflate_state *s, const ct_data *ltree,
const ct_data *dtree));
local int detect_data_type OF((deflate_state *s));
local unsigned bi_reverse OF((unsigned value, int length));
local void bi_windup OF((deflate_state *s));
......@@ -399,7 +394,6 @@ void ZLIB_INTERNAL _tr_init(s)
s->bi_buf = 0;
s->bi_valid = 0;
s->last_eob_len = 8; /* enough lookahead for inflate */
#ifdef DEBUG
s->compressed_len = 0L;
s->bits_sent = 0L;
......@@ -883,15 +877,17 @@ void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
}
/* ===========================================================================
* Flush the bits in the bit buffer to pending output (leaves at most 7 bits)
*/
void ZLIB_INTERNAL _tr_flush_bits(s)
deflate_state *s;
{
bi_flush(s);
}
/* ===========================================================================
* Send one empty static block to give enough lookahead for inflate.
* This takes 10 bits, of which 7 may remain in the bit buffer.
* The current inflate code requires 9 bits of lookahead. If the
* last two codes for the previous block (real code plus EOB) were coded
* on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
* the last real code. In this case we send two empty static blocks instead
* of one. (There are no problems if the previous block is stored or fixed.)
* To simplify the code, we assume the worst case of last real code encoded
* on one bit only.
*/
void ZLIB_INTERNAL _tr_align(s)
deflate_state *s;
......@@ -902,20 +898,6 @@ void ZLIB_INTERNAL _tr_align(s)
s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
#endif
bi_flush(s);
/* Of the 10 bits for the empty block, we have already sent
* (10 - bi_valid) bits. The lookahead for the last real code (before
* the EOB of the previous block) was thus at least one plus the length
* of the EOB plus what we have just sent of the empty static block.
*/
if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
send_bits(s, STATIC_TREES<<1, 3);
send_code(s, END_BLOCK, static_ltree);
#ifdef DEBUG
s->compressed_len += 10L;
#endif
bi_flush(s);
}
s->last_eob_len = 7;
}
/* ===========================================================================
......@@ -990,7 +972,8 @@ void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
} else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) {
#endif
send_bits(s, (STATIC_TREES<<1)+last, 3);
compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
compress_block(s, (const ct_data *)static_ltree,
(const ct_data *)static_dtree);
#ifdef DEBUG
s->compressed_len += 3 + s->static_len;
#endif
......@@ -998,7 +981,8 @@ void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
send_bits(s, (DYN_TREES<<1)+last, 3);
send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
max_blindex+1);
compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
compress_block(s, (const ct_data *)s->dyn_ltree,
(const ct_data *)s->dyn_dtree);
#ifdef DEBUG
s->compressed_len += 3 + s->opt_len;
#endif
......@@ -1075,8 +1059,8 @@ int ZLIB_INTERNAL _tr_tally (s, dist, lc)
*/
local void compress_block(s, ltree, dtree)
deflate_state *s;
ct_data *ltree; /* literal tree */
ct_data *dtree; /* distance tree */
const ct_data *ltree; /* literal tree */
const ct_data *dtree; /* distance tree */
{
unsigned dist; /* distance of matched string */
int lc; /* match length or unmatched char (if dist == 0) */
......@@ -1118,7 +1102,6 @@ local void compress_block(s, ltree, dtree)
} while (lx < s->last_lit);
send_code(s, END_BLOCK, ltree);
s->last_eob_len = ltree[END_BLOCK].Len;
}
/* ===========================================================================
......@@ -1226,7 +1209,6 @@ local void copy_block(s, buf, len, header)
int header; /* true if block header must be written */
{
bi_windup(s); /* align on byte boundary */
s->last_eob_len = 8; /* enough lookahead for inflate */
if (header) {
put_short(s, (ush)len);
......
deps/zlib/uncompr.c 0 → 100644
/* uncompr.c -- decompress a memory buffer
* Copyright (C) 1995-2003, 2010 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* @(#) $Id$ */
#define ZLIB_INTERNAL
#include "zlib.h"
/* ===========================================================================
Decompresses the source buffer into the destination buffer. sourceLen is
the byte length of the source buffer. Upon entry, destLen is the total
size of the destination buffer, which must be large enough to hold the
entire uncompressed data. (The size of the uncompressed data must have
been saved previously by the compressor and transmitted to the decompressor
by some mechanism outside the scope of this compression library.)
Upon exit, destLen is the actual size of the compressed buffer.
uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_BUF_ERROR if there was not enough room in the output
buffer, or Z_DATA_ERROR if the input data was corrupted.
*/
int ZEXPORT uncompress (dest, destLen, source, sourceLen)
Bytef *dest;
uLongf *destLen;
const Bytef *source;
uLong sourceLen;
{
z_stream stream;
int err;
stream.next_in = (z_const Bytef *)source;
stream.avail_in = (uInt)sourceLen;
/* Check for source > 64K on 16-bit machine: */
if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
stream.next_out = dest;
stream.avail_out = (uInt)*destLen;
if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
stream.zalloc = (alloc_func)0;
stream.zfree = (free_func)0;
err = inflateInit(&stream);
if (err != Z_OK) return err;
err = inflate(&stream, Z_FINISH);
if (err != Z_STREAM_END) {
inflateEnd(&stream);
if (err == Z_NEED_DICT || (err == Z_BUF_ERROR && stream.avail_in == 0))
return Z_DATA_ERROR;
return err;
}
*destLen = stream.total_out;
err = inflateEnd(&stream);
return err;
}
deps/zlib/zlib.h
/* zlib.h -- interface of the 'zlib' general purpose compression library
version 1.2.5, April 19th, 2010
version 1.2.8, April 28th, 2013
Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
......@@ -24,8 +24,8 @@
The data format used by the zlib library is described by RFCs (Request for
Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
(zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
(zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
*/
#ifndef ZLIB_H
......@@ -37,11 +37,11 @@
extern "C" {
#endif
#define ZLIB_VERSION "1.2.5"
#define ZLIB_VERNUM 0x1250
#define ZLIB_VERSION "1.2.8"
#define ZLIB_VERNUM 0x1280
#define ZLIB_VER_MAJOR 1
#define ZLIB_VER_MINOR 2
#define ZLIB_VER_REVISION 5
#define ZLIB_VER_REVISION 8
#define ZLIB_VER_SUBREVISION 0
/*
......@@ -83,15 +83,15 @@ typedef void (*free_func) OF((voidpf opaque, voidpf address));
struct internal_state;
typedef struct z_stream_s {
Bytef *next_in; /* next input byte */
z_const Bytef *next_in; /* next input byte */
uInt avail_in; /* number of bytes available at next_in */
uLong total_in; /* total nb of input bytes read so far */
uLong total_in; /* total number of input bytes read so far */
Bytef *next_out; /* next output byte should be put there */
uInt avail_out; /* remaining free space at next_out */
uLong total_out; /* total nb of bytes output so far */
uLong total_out; /* total number of bytes output so far */
char *msg; /* last error message, NULL if no error */
z_const char *msg; /* last error message, NULL if no error */
struct internal_state FAR *state; /* not visible by applications */
alloc_func zalloc; /* used to allocate the internal state */
......@@ -327,8 +327,9 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
Z_FINISH can be used immediately after deflateInit if all the compression
is to be done in a single step. In this case, avail_out must be at least the
value returned by deflateBound (see below). If deflate does not return
Z_STREAM_END, then it must be called again as described above.
value returned by deflateBound (see below). Then deflate is guaranteed to
return Z_STREAM_END. If not enough output space is provided, deflate will
not return Z_STREAM_END, and it must be called again as described above.
deflate() sets strm->adler to the adler32 checksum of all input read
so far (that is, total_in bytes).
......@@ -451,23 +452,29 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
error. However if all decompression is to be performed in a single step (a
single call of inflate), the parameter flush should be set to Z_FINISH. In
this case all pending input is processed and all pending output is flushed;
avail_out must be large enough to hold all the uncompressed data. (The size
of the uncompressed data may have been saved by the compressor for this
purpose.) The next operation on this stream must be inflateEnd to deallocate
the decompression state. The use of Z_FINISH is never required, but can be
used to inform inflate that a faster approach may be used for the single
inflate() call.
avail_out must be large enough to hold all of the uncompressed data for the
operation to complete. (The size of the uncompressed data may have been
saved by the compressor for this purpose.) The use of Z_FINISH is not
required to perform an inflation in one step. However it may be used to
inform inflate that a faster approach can be used for the single inflate()
call. Z_FINISH also informs inflate to not maintain a sliding window if the
stream completes, which reduces inflate's memory footprint. If the stream
does not complete, either because not all of the stream is provided or not
enough output space is provided, then a sliding window will be allocated and
inflate() can be called again to continue the operation as if Z_NO_FLUSH had
been used.
In this implementation, inflate() always flushes as much output as
possible to the output buffer, and always uses the faster approach on the
first call. So the only effect of the flush parameter in this implementation
is on the return value of inflate(), as noted below, or when it returns early
because Z_BLOCK or Z_TREES is used.
first call. So the effects of the flush parameter in this implementation are
on the return value of inflate() as noted below, when inflate() returns early
when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of
memory for a sliding window when Z_FINISH is used.
If a preset dictionary is needed after this call (see inflateSetDictionary
below), inflate sets strm->adler to the adler32 checksum of the dictionary
below), inflate sets strm->adler to the Adler-32 checksum of the dictionary
chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
strm->adler to the adler32 checksum of all output produced so far (that is,
strm->adler to the Adler-32 checksum of all output produced so far (that is,
total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
below. At the end of the stream, inflate() checks that its computed adler32
checksum is equal to that saved by the compressor and returns Z_STREAM_END
......@@ -478,7 +485,9 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
initializing with inflateInit2(). Any information contained in the gzip
header is not retained, so applications that need that information should
instead use raw inflate, see inflateInit2() below, or inflateBack() and
perform their own processing of the gzip header and trailer.
perform their own processing of the gzip header and trailer. When processing
gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
producted so far. The CRC-32 is checked against the gzip trailer.
inflate() returns Z_OK if some progress has been made (more input processed
or more output produced), Z_STREAM_END if the end of the compressed data has
......@@ -580,10 +589,15 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
uInt dictLength));
/*
Initializes the compression dictionary from the given byte sequence
without producing any compressed output. This function must be called
immediately after deflateInit, deflateInit2 or deflateReset, before any call
of deflate. The compressor and decompressor must use exactly the same
dictionary (see inflateSetDictionary).
without producing any compressed output. When using the zlib format, this
function must be called immediately after deflateInit, deflateInit2 or
deflateReset, and before any call of deflate. When doing raw deflate, this
function must be called either before any call of deflate, or immediately
after the completion of a deflate block, i.e. after all input has been
consumed and all output has been delivered when using any of the flush
options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The
compressor and decompressor must use exactly the same dictionary (see
inflateSetDictionary).
The dictionary should consist of strings (byte sequences) that are likely
to be encountered later in the data to be compressed, with the most commonly
......@@ -610,8 +624,8 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
inconsistent (for example if deflate has already been called for this stream
or if the compression method is bsort). deflateSetDictionary does not
perform any compression: this will be done by deflate().
or if not at a block boundary for raw deflate). deflateSetDictionary does
not perform any compression: this will be done by deflate().
*/
ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
......@@ -688,8 +702,28 @@ ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
deflation of sourceLen bytes. It must be called after deflateInit() or
deflateInit2(), and after deflateSetHeader(), if used. This would be used
to allocate an output buffer for deflation in a single pass, and so would be
called before deflate().
*/
called before deflate(). If that first deflate() call is provided the
sourceLen input bytes, an output buffer allocated to the size returned by
deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
to return Z_STREAM_END. Note that it is possible for the compressed size to
be larger than the value returned by deflateBound() if flush options other
than Z_FINISH or Z_NO_FLUSH are used.
*/
ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
unsigned *pending,
int *bits));
/*
deflatePending() returns the number of bytes and bits of output that have
been generated, but not yet provided in the available output. The bytes not
provided would be due to the available output space having being consumed.
The number of bits of output not provided are between 0 and 7, where they
await more bits to join them in order to fill out a full byte. If pending
or bits are Z_NULL, then those values are not set.
deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
stream state was inconsistent.
*/
ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
int bits,
......@@ -703,8 +737,9 @@ ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
than or equal to 16, and that many of the least significant bits of value
will be inserted in the output.
deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
stream state was inconsistent.
deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough
room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the
source stream state was inconsistent.
*/
ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
......@@ -790,10 +825,11 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
can be determined from the adler32 value returned by that call of inflate.
The compressor and decompressor must use exactly the same dictionary (see
deflateSetDictionary). For raw inflate, this function can be called
immediately after inflateInit2() or inflateReset() and before any call of
inflate() to set the dictionary. The application must insure that the
dictionary that was used for compression is provided.
deflateSetDictionary). For raw inflate, this function can be called at any
time to set the dictionary. If the provided dictionary is smaller than the
window and there is already data in the window, then the provided dictionary
will amend what's there. The application must insure that the dictionary
that was used for compression is provided.
inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
......@@ -803,19 +839,38 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
inflate().
*/
ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
Bytef *dictionary,
uInt *dictLength));
/*
Returns the sliding dictionary being maintained by inflate. dictLength is
set to the number of bytes in the dictionary, and that many bytes are copied
to dictionary. dictionary must have enough space, where 32768 bytes is
always enough. If inflateGetDictionary() is called with dictionary equal to
Z_NULL, then only the dictionary length is returned, and nothing is copied.
Similary, if dictLength is Z_NULL, then it is not set.
inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
stream state is inconsistent.
*/
ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
/*
Skips invalid compressed data until a full flush point (see above the
description of deflate with Z_FULL_FLUSH) can be found, or until all
Skips invalid compressed data until a possible full flush point (see above
for the description of deflate with Z_FULL_FLUSH) can be found, or until all
available input is skipped. No output is provided.
inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
if no more input was provided, Z_DATA_ERROR if no flush point has been
found, or Z_STREAM_ERROR if the stream structure was inconsistent. In the
success case, the application may save the current current value of total_in
which indicates where valid compressed data was found. In the error case,
the application may repeatedly call inflateSync, providing more input each
time, until success or end of the input data.
inflateSync searches for a 00 00 FF FF pattern in the compressed data.
All full flush points have this pattern, but not all occurrences of this
pattern are full flush points.
inflateSync returns Z_OK if a possible full flush point has been found,
Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
In the success case, the application may save the current current value of
total_in which indicates where valid compressed data was found. In the
error case, the application may repeatedly call inflateSync, providing more
input each time, until success or end of the input data.
*/
ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
......@@ -962,12 +1017,13 @@ ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
See inflateBack() for the usage of these routines.
inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
the paramaters are invalid, Z_MEM_ERROR if the internal state could not be
the parameters are invalid, Z_MEM_ERROR if the internal state could not be
allocated, or Z_VERSION_ERROR if the version of the library does not match
the version of the header file.
*/
typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
typedef unsigned (*in_func) OF((void FAR *,
z_const unsigned char FAR * FAR *));
typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
......@@ -975,11 +1031,12 @@ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
out_func out, void FAR *out_desc));
/*
inflateBack() does a raw inflate with a single call using a call-back
interface for input and output. This is more efficient than inflate() for
file i/o applications in that it avoids copying between the output and the
sliding window by simply making the window itself the output buffer. This
function trusts the application to not change the output buffer passed by
the output function, at least until inflateBack() returns.
interface for input and output. This is potentially more efficient than
inflate() for file i/o applications, in that it avoids copying between the
output and the sliding window by simply making the window itself the output
buffer. inflate() can be faster on modern CPUs when used with large
buffers. inflateBack() trusts the application to not change the output
buffer passed by the output function, at least until inflateBack() returns.
inflateBackInit() must be called first to allocate the internal state
and to initialize the state with the user-provided window buffer.
......@@ -1088,6 +1145,7 @@ ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
27-31: 0 (reserved)
*/
#ifndef Z_SOLO
/* utility functions */
......@@ -1149,10 +1207,11 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_BUF_ERROR if there was not enough room in the output
buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In
the case where there is not enough room, uncompress() will fill the output
buffer with the uncompressed data up to that point.
*/
/* gzip file access functions */
/*
......@@ -1162,7 +1221,7 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
wrapper, documented in RFC 1952, wrapped around a deflate stream.
*/
typedef voidp gzFile; /* opaque gzip file descriptor */
typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */
/*
ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
......@@ -1172,13 +1231,28 @@ ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
for fixed code compression as in "wb9F". (See the description of
deflateInit2 for more information about the strategy parameter.) Also "a"
can be used instead of "w" to request that the gzip stream that will be
written be appended to the file. "+" will result in an error, since reading
and writing to the same gzip file is not supported.
deflateInit2 for more information about the strategy parameter.) 'T' will
request transparent writing or appending with no compression and not using
the gzip format.
"a" can be used instead of "w" to request that the gzip stream that will
be written be appended to the file. "+" will result in an error, since
reading and writing to the same gzip file is not supported. The addition of
"x" when writing will create the file exclusively, which fails if the file
already exists. On systems that support it, the addition of "e" when
reading or writing will set the flag to close the file on an execve() call.
These functions, as well as gzip, will read and decode a sequence of gzip
streams in a file. The append function of gzopen() can be used to create
such a file. (Also see gzflush() for another way to do this.) When
appending, gzopen does not test whether the file begins with a gzip stream,
nor does it look for the end of the gzip streams to begin appending. gzopen
will simply append a gzip stream to the existing file.
gzopen can be used to read a file which is not in gzip format; in this
case gzread will directly read from the file without decompression.
case gzread will directly read from the file without decompression. When
reading, this will be detected automatically by looking for the magic two-
byte gzip header.
gzopen returns NULL if the file could not be opened, if there was
insufficient memory to allocate the gzFile state, or if an invalid mode was
......@@ -1197,7 +1271,11 @@ ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
mode);. The duplicated descriptor should be saved to avoid a leak, since
gzdopen does not close fd if it fails.
gzdopen does not close fd if it fails. If you are using fileno() to get the
file descriptor from a FILE *, then you will have to use dup() to avoid
double-close()ing the file descriptor. Both gzclose() and fclose() will
close the associated file descriptor, so they need to have different file
descriptors.
gzdopen returns NULL if there was insufficient memory to allocate the
gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
......@@ -1235,14 +1313,26 @@ ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
/*
Reads the given number of uncompressed bytes from the compressed file. If
the input file was not in gzip format, gzread copies the given number of
bytes into the buffer.
the input file is not in gzip format, gzread copies the given number of
bytes into the buffer directly from the file.
After reaching the end of a gzip stream in the input, gzread will continue
to read, looking for another gzip stream, or failing that, reading the rest
of the input file directly without decompression. The entire input file
will be read if gzread is called until it returns less than the requested
len.
to read, looking for another gzip stream. Any number of gzip streams may be
concatenated in the input file, and will all be decompressed by gzread().
If something other than a gzip stream is encountered after a gzip stream,
that remaining trailing garbage is ignored (and no error is returned).
gzread can be used to read a gzip file that is being concurrently written.
Upon reaching the end of the input, gzread will return with the available
data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then
gzclearerr can be used to clear the end of file indicator in order to permit
gzread to be tried again. Z_OK indicates that a gzip stream was completed
on the last gzread. Z_BUF_ERROR indicates that the input file ended in the
middle of a gzip stream. Note that gzread does not return -1 in the event
of an incomplete gzip stream. This error is deferred until gzclose(), which
will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip
stream. Alternatively, gzerror can be used before gzclose to detect this
case.
gzread returns the number of uncompressed bytes actually read, less than
len for end of file, or -1 for error.
......@@ -1256,7 +1346,7 @@ ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
error.
*/
ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
/*
Converts, formats, and writes the arguments to the compressed file under
control of the format string, as in fprintf. gzprintf returns the number of
......@@ -1301,7 +1391,10 @@ ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
/*
Reads one byte from the compressed file. gzgetc returns this byte or -1
in case of end of file or error.
in case of end of file or error. This is implemented as a macro for speed.
As such, it does not do all of the checking the other functions do. I.e.
it does not check to see if file is NULL, nor whether the structure file
points to has been clobbered or not.
*/
ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
......@@ -1397,9 +1490,7 @@ ZEXTERN int ZEXPORT gzeof OF((gzFile file));
ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
/*
Returns true (1) if file is being copied directly while reading, or false
(0) if file is a gzip stream being decompressed. This state can change from
false to true while reading the input file if the end of a gzip stream is
reached, but is followed by data that is not another gzip stream.
(0) if file is a gzip stream being decompressed.
If the input file is empty, gzdirect() will return true, since the input
does not contain a gzip stream.
......@@ -1408,6 +1499,13 @@ ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
cause buffers to be allocated to allow reading the file to determine if it
is a gzip file. Therefore if gzbuffer() is used, it should be called before
gzdirect().
When writing, gzdirect() returns true (1) if transparent writing was
requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note:
gzdirect() is not needed when writing. Transparent writing must be
explicitly requested, so the application already knows the answer. When
linking statically, using gzdirect() will include all of the zlib code for
gzip file reading and decompression, which may not be desired.)
*/
ZEXTERN int ZEXPORT gzclose OF((gzFile file));
......@@ -1419,7 +1517,8 @@ ZEXTERN int ZEXPORT gzclose OF((gzFile file));
must not be called more than once on the same allocation.
gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
file operation error, or Z_OK on success.
file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the
last read ended in the middle of a gzip stream, or Z_OK on success.
*/
ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
......@@ -1457,6 +1556,7 @@ ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
file that is being written concurrently.
*/
#endif /* !Z_SOLO */
/* checksum functions */
......@@ -1492,16 +1592,17 @@ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note
that the z_off_t type (like off_t) is a signed integer. If len2 is
negative, the result has no meaning or utility.
*/
ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
/*
Update a running CRC-32 with the bytes buf[0..len-1] and return the
updated CRC-32. If buf is Z_NULL, this function returns the required
initial value for the for the crc. Pre- and post-conditioning (one's
complement) is performed within this function so it shouldn't be done by the
application.
initial value for the crc. Pre- and post-conditioning (one's complement) is
performed within this function so it shouldn't be done by the application.
Usage example:
......@@ -1544,17 +1645,42 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
const char *version,
int stream_size));
#define deflateInit(strm, level) \
deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
#define inflateInit(strm) \
inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
(strategy), ZLIB_VERSION, sizeof(z_stream))
(strategy), ZLIB_VERSION, (int)sizeof(z_stream))
#define inflateInit2(strm, windowBits) \
inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
(int)sizeof(z_stream))
#define inflateBackInit(strm, windowBits, window) \
inflateBackInit_((strm), (windowBits), (window), \
ZLIB_VERSION, sizeof(z_stream))
ZLIB_VERSION, (int)sizeof(z_stream))
#ifndef Z_SOLO
/* gzgetc() macro and its supporting function and exposed data structure. Note
* that the real internal state is much larger than the exposed structure.
* This abbreviated structure exposes just enough for the gzgetc() macro. The
* user should not mess with these exposed elements, since their names or
* behavior could change in the future, perhaps even capriciously. They can
* only be used by the gzgetc() macro. You have been warned.
*/
struct gzFile_s {
unsigned have;
unsigned char *next;
z_off64_t pos;
};
ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */
#ifdef Z_PREFIX_SET
# undef z_gzgetc
# define z_gzgetc(g) \
((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
#else
# define gzgetc(g) \
((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
#endif
/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
* change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
......@@ -1562,7 +1688,7 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
* functions are changed to 64 bits) -- in case these are set on systems
* without large file support, _LFS64_LARGEFILE must also be true
*/
#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
#ifdef Z_LARGE64
ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
......@@ -1571,14 +1697,23 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
#endif
#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
# define gzopen gzopen64
# define gzseek gzseek64
# define gztell gztell64
# define gzoffset gzoffset64
# define adler32_combine adler32_combine64
# define crc32_combine crc32_combine64
# ifdef _LARGEFILE64_SOURCE
#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
# ifdef Z_PREFIX_SET
# define z_gzopen z_gzopen64
# define z_gzseek z_gzseek64
# define z_gztell z_gztell64
# define z_gzoffset z_gzoffset64
# define z_adler32_combine z_adler32_combine64
# define z_crc32_combine z_crc32_combine64
# else
# define gzopen gzopen64
# define gzseek gzseek64
# define gztell gztell64
# define gzoffset gzoffset64
# define adler32_combine adler32_combine64
# define crc32_combine crc32_combine64
# endif
# ifndef Z_LARGE64
ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
......@@ -1595,6 +1730,13 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
#endif
#else /* Z_SOLO */
ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
#endif /* !Z_SOLO */
/* hack for buggy compilers */
#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
struct internal_state {int dummy;};
......@@ -1603,8 +1745,21 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
/* undocumented functions */
ZEXTERN const char * ZEXPORT zError OF((int));
ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void));
ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void));
ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int));
ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp));
ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp));
#if defined(_WIN32) && !defined(Z_SOLO)
ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path,
const char *mode));
#endif
#if defined(STDC) || defined(Z_HAVE_STDARG_H)
# ifndef Z_SOLO
ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file,
const char *format,
va_list va));
# endif
#endif
#ifdef __cplusplus
}
......
deps/zlib/zutil.c
/* zutil.c -- target dependent utility functions for the compression library
* Copyright (C) 1995-2005, 2010 Jean-loup Gailly.
* Copyright (C) 1995-2005, 2010, 2011, 2012 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* @(#) $Id$ */
#include "zutil.h"
#ifndef Z_SOLO
# include "gzguts.h"
#endif
#ifndef NO_DUMMY_DECL
struct internal_state {int dummy;}; /* for buggy compilers */
#endif
const char * const z_errmsg[10] = {
z_const char * const z_errmsg[10] = {
"need dictionary", /* Z_NEED_DICT 2 */
"stream end", /* Z_STREAM_END 1 */
"", /* Z_OK 0 */
......@@ -85,27 +88,27 @@ uLong ZEXPORT zlibCompileFlags()
#ifdef FASTEST
flags += 1L << 21;
#endif
#ifdef STDC
#if defined(STDC) || defined(Z_HAVE_STDARG_H)
# ifdef NO_vsnprintf
flags += 1L << 25;
flags += 1L << 25;
# ifdef HAS_vsprintf_void
flags += 1L << 26;
flags += 1L << 26;
# endif
# else
# ifdef HAS_vsnprintf_void
flags += 1L << 26;
flags += 1L << 26;
# endif
# endif
#else
flags += 1L << 24;
flags += 1L << 24;
# ifdef NO_snprintf
flags += 1L << 25;
flags += 1L << 25;
# ifdef HAS_sprintf_void
flags += 1L << 26;
flags += 1L << 26;
# endif
# else
# ifdef HAS_snprintf_void
flags += 1L << 26;
flags += 1L << 26;
# endif
# endif
#endif
......@@ -181,6 +184,7 @@ void ZLIB_INTERNAL zmemzero(dest, len)
}
#endif
#ifndef Z_SOLO
#ifdef SYS16BIT
......@@ -316,3 +320,5 @@ void ZLIB_INTERNAL zcfree (opaque, ptr)
}
#endif /* MY_ZCALLOC */
#endif /* !Z_SOLO */
deps/zlib/zutil.h
/* zutil.h -- internal interface and configuration of the compression library
* Copyright (C) 1995-2010 Jean-loup Gailly.
* Copyright (C) 1995-2013 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -13,7 +13,7 @@
#ifndef ZUTIL_H
#define ZUTIL_H
#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
#ifdef HAVE_HIDDEN
# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
#else
# define ZLIB_INTERNAL
......@@ -21,7 +21,7 @@
#include "zlib.h"
#ifdef STDC
#if defined(STDC) && !defined(Z_SOLO)
# if !(defined(_WIN32_WCE) && defined(_MSC_VER))
# include <stddef.h>
# endif
......@@ -29,6 +29,10 @@
# include <stdlib.h>
#endif
#ifdef Z_SOLO
typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */
#endif
#ifndef local
# define local static
#endif
......@@ -40,13 +44,13 @@ typedef unsigned short ush;
typedef ush FAR ushf;
typedef unsigned long ulg;
extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
/* (size given to avoid silly warnings with Visual C++) */
#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
#define ERR_RETURN(strm,err) \
return (strm->msg = (char*)ERR_MSG(err), (err))
return (strm->msg = ERR_MSG(err), (err))
/* To be used only when the state is known to be valid */
/* common constants */
......@@ -78,16 +82,18 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
# define OS_CODE 0x00
# if defined(__TURBOC__) || defined(__BORLANDC__)
# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
/* Allow compilation with ANSI keywords only enabled */
void _Cdecl farfree( void *block );
void *_Cdecl farmalloc( unsigned long nbytes );
# else
# include <alloc.h>
# ifndef Z_SOLO
# if defined(__TURBOC__) || defined(__BORLANDC__)
# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
/* Allow compilation with ANSI keywords only enabled */
void _Cdecl farfree( void *block );
void *_Cdecl farmalloc( unsigned long nbytes );
# else
# include <alloc.h>
# endif
# else /* MSC or DJGPP */
# include <malloc.h>
# endif
# else /* MSC or DJGPP */
# include <malloc.h>
# endif
#endif
......@@ -107,18 +113,20 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
#ifdef OS2
# define OS_CODE 0x06
# ifdef M_I86
# if defined(M_I86) && !defined(Z_SOLO)
# include <malloc.h>
# endif
#endif
#if defined(MACOS) || defined(TARGET_OS_MAC)
# define OS_CODE 0x07
# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
# include <unix.h> /* for fdopen */
# else
# ifndef fdopen
# define fdopen(fd,mode) NULL /* No fdopen() */
# ifndef Z_SOLO
# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
# include <unix.h> /* for fdopen */
# else
# ifndef fdopen
# define fdopen(fd,mode) NULL /* No fdopen() */
# endif
# endif
# endif
#endif
......@@ -153,14 +161,15 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
# endif
#endif
#if defined(__BORLANDC__)
#if defined(__BORLANDC__) && !defined(MSDOS)
#pragma warn -8004
#pragma warn -8008
#pragma warn -8066
#endif
/* provide prototypes for these when building zlib without LFS */
#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
#if !defined(_WIN32) && \
(!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
#endif
......@@ -177,42 +186,7 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
/* functions */
#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
# ifndef HAVE_VSNPRINTF
# define HAVE_VSNPRINTF
# endif
#endif
#if defined(__CYGWIN__)
# ifndef HAVE_VSNPRINTF
# define HAVE_VSNPRINTF
# endif
#endif
#ifndef HAVE_VSNPRINTF
# ifdef MSDOS
/* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
but for now we just assume it doesn't. */
# define NO_vsnprintf
# endif
# ifdef __TURBOC__
# define NO_vsnprintf
# endif
# ifdef WIN32
/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
# if !defined(vsnprintf) && !defined(NO_vsnprintf)
# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
# define vsnprintf _vsnprintf
# endif
# endif
# endif
# ifdef __SASC
# define NO_vsnprintf
# endif
#endif
#ifdef VMS
# define NO_vsnprintf
#endif
#if defined(pyr)
#if defined(pyr) || defined(Z_SOLO)
# define NO_MEMCPY
#endif
#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
......@@ -261,14 +235,19 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
# define Tracecv(c,x)
#endif
voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
unsigned size));
void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr));
#ifndef Z_SOLO
voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
unsigned size));
void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr));
#endif
#define ZALLOC(strm, items, size) \
(*((strm)->zalloc))((strm)->opaque, (items), (size))
#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
/* Reverse the bytes in a 32-bit value */
#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
(((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
#endif /* ZUTIL_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment