/**CFile****************************************************************

  FileName    [fraigSat.c]

  PackageName [FRAIG: Functionally reduced AND-INV graphs.]

  Synopsis    [Proving functional equivalence using SAT.]

  Author      [Alan Mishchenko <alanmi@eecs.berkeley.edu>]
  
  Affiliation [UC Berkeley]

  Date        [Ver. 2.0. Started - October 1, 2004]

  Revision    [$Id: fraigSat.c,v 1.10 2005/07/08 01:01:32 alanmi Exp $]

***********************************************************************/

#include <math.h>
#include "fraigInt.h"
#include "sat/msat/msatInt.h"

ABC_NAMESPACE_IMPL_START


////////////////////////////////////////////////////////////////////////
///                        DECLARATIONS                              ///
////////////////////////////////////////////////////////////////////////

static void Fraig_OrderVariables( Fraig_Man_t * pMan, Fraig_Node_t * pOld, Fraig_Node_t * pNew );
static void Fraig_SetupAdjacent( Fraig_Man_t * pMan, Msat_IntVec_t * vConeVars );
static void Fraig_SetupAdjacentMark( Fraig_Man_t * pMan, Msat_IntVec_t * vConeVars );
static void Fraig_PrepareCones( Fraig_Man_t * pMan, Fraig_Node_t * pOld, Fraig_Node_t * pNew );
static void Fraig_PrepareCones_rec( Fraig_Man_t * pMan, Fraig_Node_t * pNode );

static void Fraig_SupergateAddClauses( Fraig_Man_t * pMan, Fraig_Node_t * pNode, Fraig_NodeVec_t * vSuper );
static void Fraig_SupergateAddClausesExor( Fraig_Man_t * pMan, Fraig_Node_t * pNode );
static void Fraig_SupergateAddClausesMux( Fraig_Man_t * pMan, Fraig_Node_t * pNode );
//static void Fraig_DetectFanoutFreeCone( Fraig_Man_t * pMan, Fraig_Node_t * pNode );
static void Fraig_DetectFanoutFreeConeMux( Fraig_Man_t * pMan, Fraig_Node_t * pNode );
static void Fraig_SetActivity( Fraig_Man_t * pMan, Fraig_Node_t * pOld, Fraig_Node_t * pNew );

// The lesson learned seems to be that variable should be in reverse topological order
// from the output of the miter. The ordering of adjacency lists is very important.
// The best way seems to be fanins followed by fanouts. Slight changes to this order
// leads to big degradation in quality.

static int nMuxes;

////////////////////////////////////////////////////////////////////////
///                     FUNCTION DEFINITIONS                         ///
////////////////////////////////////////////////////////////////////////

/**Function*************************************************************

  Synopsis    [Checks equivalence of two nodes.]

  Description [Returns 1 iff the nodes are equivalent.]
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fraig_NodesAreEqual( Fraig_Man_t * p, Fraig_Node_t * pNode1, Fraig_Node_t * pNode2, int nBTLimit, int nTimeLimit )
{
    if ( pNode1 == pNode2 )
        return 1;
    if ( pNode1 == Fraig_Not(pNode2) )
        return 0;
    return Fraig_NodeIsEquivalent( p, Fraig_Regular(pNode1), Fraig_Regular(pNode2), nBTLimit, nTimeLimit );
}

/**Function*************************************************************

  Synopsis    [Tries to prove the final miter.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
void Fraig_ManProveMiter( Fraig_Man_t * p )
{
    Fraig_Node_t * pNode;
    int i;
    abctime clk;

    if ( !p->fTryProve )
        return;
 
    clk = Abc_Clock();
    // consider all outputs of the multi-output miter
    for ( i = 0; i < p->vOutputs->nSize; i++ )
    {
        pNode = Fraig_Regular(p->vOutputs->pArray[i]);
        // skip already constant nodes
        if ( pNode == p->pConst1 )
            continue;
        // skip nodes that are different according to simulation
        if ( !Fraig_CompareSimInfo( pNode, p->pConst1, p->nWordsRand, 1 ) )
            continue;
        if ( Fraig_NodeIsEquivalent( p, p->pConst1, pNode, -1, p->nSeconds ) )
        {
            if ( Fraig_IsComplement(p->vOutputs->pArray[i]) ^ Fraig_NodeComparePhase(p->pConst1, pNode) )
                p->vOutputs->pArray[i] = Fraig_Not(p->pConst1);
            else
                p->vOutputs->pArray[i] = p->pConst1;
        }
    }
    if ( p->fVerboseP ) 
    {
//        ABC_PRT( "Final miter proof time", Abc_Clock() - clk );
    }
}

/**Function*************************************************************

  Synopsis    [Returns 1 if the miter is unsat; 0 if sat; -1 if undecided.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fraig_ManCheckMiter( Fraig_Man_t * p )
{
    Fraig_Node_t * pNode;
    int i;
    ABC_FREE( p->pModel );
    for ( i = 0; i < p->vOutputs->nSize; i++ )
    {
        // get the output node (it can be complemented!)
        pNode = p->vOutputs->pArray[i];
        // if the miter is constant 0, the problem is UNSAT
        if ( pNode == Fraig_Not(p->pConst1) )
            continue;
        // consider the special case when the miter is constant 1
        if ( pNode == p->pConst1 )
        {
            // in this case, any counter example will do to distinquish it from constant 0
            // here we pick the counter example composed of all zeros
            p->pModel = Fraig_ManAllocCounterExample( p );
            return 0;
        }
        // save the counter example
        p->pModel = Fraig_ManSaveCounterExample( p, pNode );
        // if the model is not found, return undecided
        if ( p->pModel == NULL )
            return -1;
        else
            return 0;
    }
    return 1;
}


/**Function*************************************************************

  Synopsis    [Returns 1 if pOld is in the TFI of pNew.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fraig_MarkTfi_rec( Fraig_Man_t * pMan, Fraig_Node_t * pNode )
{
    // skip the visited node
    if ( pNode->TravId == pMan->nTravIds )
        return 0;
    pNode->TravId = pMan->nTravIds;
    // skip the PI node
    if ( pNode->NumPi >= 0 )
        return 1;
    // check the children
    return Fraig_MarkTfi_rec( pMan, Fraig_Regular(pNode->p1) ) +
           Fraig_MarkTfi_rec( pMan, Fraig_Regular(pNode->p2) );
}

/**Function*************************************************************

  Synopsis    [Returns 1 if pOld is in the TFI of pNew.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fraig_MarkTfi2_rec( Fraig_Man_t * pMan, Fraig_Node_t * pNode )
{
    // skip the visited node
    if ( pNode->TravId == pMan->nTravIds )
        return 0;
    // skip the boundary node
    if ( pNode->TravId == pMan->nTravIds-1 )
    {
        pNode->TravId = pMan->nTravIds;
        return 1;
    }
    pNode->TravId = pMan->nTravIds;
    // skip the PI node
    if ( pNode->NumPi >= 0 )
        return 1;
    // check the children
    return Fraig_MarkTfi2_rec( pMan, Fraig_Regular(pNode->p1) ) +
           Fraig_MarkTfi2_rec( pMan, Fraig_Regular(pNode->p2) );
}

/**Function*************************************************************

  Synopsis    [Returns 1 if pOld is in the TFI of pNew.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fraig_MarkTfi3_rec( Fraig_Man_t * pMan, Fraig_Node_t * pNode )
{
    // skip the visited node
    if ( pNode->TravId == pMan->nTravIds )
        return 1;
    // skip the boundary node
    if ( pNode->TravId == pMan->nTravIds-1 )
    {
        pNode->TravId = pMan->nTravIds;
        return 1;
    }
    pNode->TravId = pMan->nTravIds;
    // skip the PI node
    if ( pNode->NumPi >= 0 )
        return 0;
    // check the children
    return Fraig_MarkTfi3_rec( pMan, Fraig_Regular(pNode->p1) ) *
           Fraig_MarkTfi3_rec( pMan, Fraig_Regular(pNode->p2) );
}

/**Function*************************************************************

  Synopsis    []

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
void Fraig_VarsStudy( Fraig_Man_t * p, Fraig_Node_t * pOld, Fraig_Node_t * pNew )
{
    int NumPis, NumCut, fContain;

    // mark the TFI of pNew
    p->nTravIds++;
    NumPis = Fraig_MarkTfi_rec( p, pNew );
    printf( "(%d)(%d,%d):", NumPis, pOld->Level, pNew->Level );

    // check if the old is in the TFI
    if ( pOld->TravId == p->nTravIds )
    {
        printf( "* " );
        return;
    }

    // count the boundary of nodes in pOld
    p->nTravIds++;
    NumCut = Fraig_MarkTfi2_rec( p, pOld );
    printf( "%d", NumCut );

    // check if the new is contained in the old's support
    p->nTravIds++;
    fContain = Fraig_MarkTfi3_rec( p, pNew );
    printf( "%c ", fContain? '+':'-' );
}


/**Function*************************************************************

  Synopsis    [Checks whether two nodes are functinally equivalent.]

  Description [The flag (fComp) tells whether the nodes to be checked
  are in the opposite polarity. The second flag (fSkipZeros) tells whether
  the checking should be performed if the simulation vectors are zeros.
  Returns 1 if the nodes are equivalent; 0 othewise.]
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fraig_NodeIsEquivalent( Fraig_Man_t * p, Fraig_Node_t * pOld, Fraig_Node_t * pNew, int nBTLimit, int nTimeLimit )
{
    int RetValue, RetValue1, i, fComp;
    abctime clk;
    int fVerbose = 0;
    int fSwitch = 0;

    // make sure the nodes are not complemented
    assert( !Fraig_IsComplement(pNew) );
    assert( !Fraig_IsComplement(pOld) );
    assert( pNew != pOld );

    // if at least one of the nodes is a failed node, perform adjustments:
    // if the backtrack limit is small, simply skip this node
    // if the backtrack limit is > 10, take the quare root of the limit
    if ( nBTLimit > 0 && (pOld->fFailTfo || pNew->fFailTfo) )
    {
        p->nSatFails++;
//            return 0;
//        if ( nBTLimit > 10 )
//            nBTLimit /= 10;
        if ( nBTLimit <= 10 )
            return 0;
        nBTLimit = (int)sqrt((double)nBTLimit);
//        fSwitch = 1;
    }

    p->nSatCalls++;

    // make sure the solver is allocated and has enough variables
    if ( p->pSat == NULL )
        Fraig_ManCreateSolver( p );
    // make sure the SAT solver has enough variables
    for ( i = Msat_SolverReadVarNum(p->pSat); i < p->vNodes->nSize; i++ )
        Msat_SolverAddVar( p->pSat, p->vNodes->pArray[i]->Level );


 
/*
    {
        Fraig_Node_t * ppNodes[2] = { pOld, pNew };
        extern void Fraig_MappingShowNodes( Fraig_Man_t * pMan, Fraig_Node_t ** ppRoots, int nRoots, char * pFileName );
        Fraig_MappingShowNodes( p, ppNodes, 2, "temp_aig" );
    }
*/

    nMuxes = 0;


    // get the logic cone
clk = Abc_Clock();
//    Fraig_VarsStudy( p, pOld, pNew );
    Fraig_OrderVariables( p, pOld, pNew );
//    Fraig_PrepareCones( p, pOld, pNew );
p->timeTrav += Abc_Clock() - clk;

//    printf( "The number of MUXes detected = %d (%5.2f %% of logic).  ", nMuxes, 300.0*nMuxes/(p->vNodes->nSize - p->vInputs->nSize) );
//    ABC_PRT( "Time", Abc_Clock() - clk );

if ( fVerbose )
    printf( "%d(%d) - ", Fraig_CountPis(p,p->vVarsInt), Msat_IntVecReadSize(p->vVarsInt) );


    // prepare variable activity
    Fraig_SetActivity( p, pOld, pNew );

    // get the complemented attribute
    fComp = Fraig_NodeComparePhase( pOld, pNew );
//Msat_SolverPrintClauses( p->pSat );

    ////////////////////////////////////////////
    // prepare the solver to run incrementally on these variables
//clk = Abc_Clock();
    Msat_SolverPrepare( p->pSat, p->vVarsInt );
//p->time3 += Abc_Clock() - clk;


    // solve under assumptions
    // A = 1; B = 0     OR     A = 1; B = 1 
    Msat_IntVecClear( p->vProj );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pOld->Num, 0) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNew->Num, !fComp) );

//Msat_SolverWriteDimacs( p->pSat, "temp_fraig.cnf" );

    // run the solver
clk = Abc_Clock();
    RetValue1 = Msat_SolverSolve( p->pSat, p->vProj, nBTLimit, nTimeLimit );
p->timeSat += Abc_Clock() - clk;

    if ( RetValue1 == MSAT_FALSE )
    {
//p->time1 += Abc_Clock() - clk;

if ( fVerbose )
{
//    printf( "unsat  %d  ", Msat_SolverReadBackTracks(p->pSat) );
//ABC_PRT( "time", Abc_Clock() - clk );
}

        // add the clause
        Msat_IntVecClear( p->vProj );
        Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pOld->Num, 1) );
        Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNew->Num, fComp) );
        RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
        assert( RetValue );
        // continue solving the other implication
    }
    else if ( RetValue1 == MSAT_TRUE )
    {
//p->time2 += Abc_Clock() - clk;

if ( fVerbose )
{
//    printf( "sat  %d  ", Msat_SolverReadBackTracks(p->pSat) );
//ABC_PRT( "time", Abc_Clock() - clk );
}

        // record the counter example
        Fraig_FeedBack( p, Msat_SolverReadModelArray(p->pSat), p->vVarsInt, pOld, pNew );

//        if ( pOld->fFailTfo || pNew->fFailTfo )
//            printf( "*" );
//        printf( "s(%d)", pNew->Level );
        if ( fSwitch )
             printf( "s(%d)", pNew->Level );
        p->nSatCounter++;
        return 0;
    }
    else // if ( RetValue1 == MSAT_UNKNOWN )
    {
p->time3 += Abc_Clock() - clk;

//        if ( pOld->fFailTfo || pNew->fFailTfo )
//            printf( "*" );
//        printf( "T(%d)", pNew->Level );

        // mark the node as the failed node
        if ( pOld != p->pConst1 ) 
            pOld->fFailTfo = 1;
        pNew->fFailTfo = 1;
//        p->nSatFails++;
        if ( fSwitch )
             printf( "T(%d)", pNew->Level );
        p->nSatFailsReal++;
        return 0;
    }

    // if the old node was constant 0, we already know the answer
    if ( pOld == p->pConst1 )
        return 1;

    ////////////////////////////////////////////
    // prepare the solver to run incrementally 
//clk = Abc_Clock();
    Msat_SolverPrepare( p->pSat, p->vVarsInt );
//p->time3 += Abc_Clock() - clk;
    // solve under assumptions
    // A = 0; B = 1     OR     A = 0; B = 0 
    Msat_IntVecClear( p->vProj );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pOld->Num, 1) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNew->Num, fComp) );
    // run the solver
clk = Abc_Clock();
    RetValue1 = Msat_SolverSolve( p->pSat, p->vProj, nBTLimit, nTimeLimit );
p->timeSat += Abc_Clock() - clk;

    if ( RetValue1 == MSAT_FALSE )
    {
//p->time1 += Abc_Clock() - clk;

if ( fVerbose )
{
//    printf( "unsat  %d  ", Msat_SolverReadBackTracks(p->pSat) );
//ABC_PRT( "time", Abc_Clock() - clk );
}

        // add the clause
        Msat_IntVecClear( p->vProj );
        Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pOld->Num, 0) );
        Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNew->Num, !fComp) );
        RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
        assert( RetValue );
        // continue solving the other implication
    }
    else if ( RetValue1 == MSAT_TRUE )
    {
//p->time2 += Abc_Clock() - clk;

if ( fVerbose )
{
//    printf( "sat  %d  ", Msat_SolverReadBackTracks(p->pSat) );
//ABC_PRT( "time", Abc_Clock() - clk );
}

        // record the counter example
        Fraig_FeedBack( p, Msat_SolverReadModelArray(p->pSat), p->vVarsInt, pOld, pNew );
        p->nSatCounter++;

//        if ( pOld->fFailTfo || pNew->fFailTfo )
//            printf( "*" );
//        printf( "s(%d)", pNew->Level );
        if ( fSwitch )
             printf( "s(%d)", pNew->Level );
        return 0;
    }
    else // if ( RetValue1 == MSAT_UNKNOWN )
    {
p->time3 += Abc_Clock() - clk;

//        if ( pOld->fFailTfo || pNew->fFailTfo )
//            printf( "*" );
//        printf( "T(%d)", pNew->Level );
        if ( fSwitch )
             printf( "T(%d)", pNew->Level );

        // mark the node as the failed node
        pOld->fFailTfo = 1;
        pNew->fFailTfo = 1;
//        p->nSatFails++;
        p->nSatFailsReal++;
        return 0;
    }

    // return SAT proof
    p->nSatProof++;

//    if ( pOld->fFailTfo || pNew->fFailTfo )
//        printf( "*" );
//    printf( "u(%d)", pNew->Level );

    if ( fSwitch )
         printf( "u(%d)", pNew->Level );

    return 1;
}


/**Function*************************************************************

  Synopsis    [Checks whether pOld => pNew.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fraig_NodeIsImplication( Fraig_Man_t * p, Fraig_Node_t * pOld, Fraig_Node_t * pNew, int nBTLimit )
{
    int RetValue, RetValue1, i, fComp;
    abctime clk;
    int fVerbose = 0;

    // make sure the nodes are not complemented
    assert( !Fraig_IsComplement(pNew) );
    assert( !Fraig_IsComplement(pOld) );
    assert( pNew != pOld );

    p->nSatCallsImp++;

    // make sure the solver is allocated and has enough variables
    if ( p->pSat == NULL )
        Fraig_ManCreateSolver( p );
    // make sure the SAT solver has enough variables
    for ( i = Msat_SolverReadVarNum(p->pSat); i < p->vNodes->nSize; i++ )
        Msat_SolverAddVar( p->pSat, p->vNodes->pArray[i]->Level );

   // get the logic cone
clk = Abc_Clock();
    Fraig_OrderVariables( p, pOld, pNew );
//    Fraig_PrepareCones( p, pOld, pNew );
p->timeTrav += Abc_Clock() - clk;

if ( fVerbose )
    printf( "%d(%d) - ", Fraig_CountPis(p,p->vVarsInt), Msat_IntVecReadSize(p->vVarsInt) );


    // get the complemented attribute
    fComp = Fraig_NodeComparePhase( pOld, pNew );
//Msat_SolverPrintClauses( p->pSat );

    ////////////////////////////////////////////
    // prepare the solver to run incrementally on these variables
//clk = Abc_Clock();
    Msat_SolverPrepare( p->pSat, p->vVarsInt );
//p->time3 += Abc_Clock() - clk;

    // solve under assumptions
    // A = 1; B = 0     OR     A = 1; B = 1 
    Msat_IntVecClear( p->vProj );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pOld->Num, 0) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNew->Num, !fComp) );
    // run the solver
clk = Abc_Clock();
    RetValue1 = Msat_SolverSolve( p->pSat, p->vProj, nBTLimit, 1000000 );
p->timeSat += Abc_Clock() - clk;

    if ( RetValue1 == MSAT_FALSE )
    {
//p->time1 += Abc_Clock() - clk;

if ( fVerbose )
{
//    printf( "unsat  %d  ", Msat_SolverReadBackTracks(p->pSat) );
//ABC_PRT( "time", Abc_Clock() - clk );
}

        // add the clause
        Msat_IntVecClear( p->vProj );
        Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pOld->Num, 1) );
        Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNew->Num, fComp) );
        RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
        assert( RetValue );
//        p->nSatProofImp++;
        return 1;
    }
    else if ( RetValue1 == MSAT_TRUE )
    {
//p->time2 += Abc_Clock() - clk;

if ( fVerbose )
{
//    printf( "sat  %d  ", Msat_SolverReadBackTracks(p->pSat) );
//ABC_PRT( "time", Abc_Clock() - clk );
}
        // record the counter example
        Fraig_FeedBack( p, Msat_SolverReadModelArray(p->pSat), p->vVarsInt, pOld, pNew );
        p->nSatCounterImp++;
        return 0;
    }
    else // if ( RetValue1 == MSAT_UNKNOWN )
    {
p->time3 += Abc_Clock() - clk;
        p->nSatFailsImp++;
        return 0;
    }
}

/**Function*************************************************************

  Synopsis    [Prepares the SAT solver to run on the two nodes.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fraig_ManCheckClauseUsingSat( Fraig_Man_t * p, Fraig_Node_t * pNode1, Fraig_Node_t * pNode2, int nBTLimit )
{
    Fraig_Node_t * pNode1R, * pNode2R;
    int RetValue, RetValue1, i;
    abctime clk;
    int fVerbose = 0;

    pNode1R = Fraig_Regular(pNode1);
    pNode2R = Fraig_Regular(pNode2);
    assert( pNode1R != pNode2R );

    // make sure the solver is allocated and has enough variables
    if ( p->pSat == NULL )
        Fraig_ManCreateSolver( p );
    // make sure the SAT solver has enough variables
    for ( i = Msat_SolverReadVarNum(p->pSat); i < p->vNodes->nSize; i++ )
        Msat_SolverAddVar( p->pSat, p->vNodes->pArray[i]->Level );

   // get the logic cone
clk = Abc_Clock();
    Fraig_OrderVariables( p, pNode1R, pNode2R );
//    Fraig_PrepareCones( p, pNode1R, pNode2R );
p->timeTrav += Abc_Clock() - clk;

    ////////////////////////////////////////////
    // prepare the solver to run incrementally on these variables
//clk = Abc_Clock();
    Msat_SolverPrepare( p->pSat, p->vVarsInt );
//p->time3 += Abc_Clock() - clk;

    // solve under assumptions
    // A = 1; B = 0     OR     A = 1; B = 1 
    Msat_IntVecClear( p->vProj );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode1R->Num, !Fraig_IsComplement(pNode1)) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode2R->Num, !Fraig_IsComplement(pNode2)) );
    // run the solver
clk = Abc_Clock();
    RetValue1 = Msat_SolverSolve( p->pSat, p->vProj, nBTLimit, 1000000 );
p->timeSat += Abc_Clock() - clk;

    if ( RetValue1 == MSAT_FALSE )
    {
//p->time1 += Abc_Clock() - clk;

if ( fVerbose )
{
//    printf( "unsat  %d  ", Msat_SolverReadBackTracks(p->pSat) );
//ABC_PRT( "time", Abc_Clock() - clk );
}

        // add the clause
        Msat_IntVecClear( p->vProj );
        Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode1R->Num, Fraig_IsComplement(pNode1)) );
        Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode2R->Num, Fraig_IsComplement(pNode2)) );
        RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
        assert( RetValue );
//        p->nSatProofImp++;
        return 1;
    }
    else if ( RetValue1 == MSAT_TRUE )
    {
//p->time2 += Abc_Clock() - clk;

if ( fVerbose )
{
//    printf( "sat  %d  ", Msat_SolverReadBackTracks(p->pSat) );
//ABC_PRT( "time", Abc_Clock() - clk );
}
        // record the counter example
//        Fraig_FeedBack( p, Msat_SolverReadModelArray(p->pSat), p->vVarsInt, pNode1R, pNode2R );
        p->nSatCounterImp++;
        return 0;
    }
    else // if ( RetValue1 == MSAT_UNKNOWN )
    {
p->time3 += Abc_Clock() - clk;
        p->nSatFailsImp++;
        return 0;
    }
}


/**Function*************************************************************

  Synopsis    [Prepares the SAT solver to run on the two nodes.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
void Fraig_PrepareCones( Fraig_Man_t * pMan, Fraig_Node_t * pOld, Fraig_Node_t * pNew )
{
//    Msat_IntVec_t * vAdjs;
//    int * pVars, nVars, i, k;
    int nVarsAlloc;

    assert( pOld != pNew );
    assert( !Fraig_IsComplement(pOld) );
    assert( !Fraig_IsComplement(pNew) );
    // clean the variables
    nVarsAlloc = Msat_IntVecReadSize(pMan->vVarsUsed);
    Msat_IntVecFill( pMan->vVarsUsed, nVarsAlloc, 0 );
    Msat_IntVecClear( pMan->vVarsInt );

    pMan->nTravIds++;
    Fraig_PrepareCones_rec( pMan, pNew );
    Fraig_PrepareCones_rec( pMan, pOld );


/*
    nVars = Msat_IntVecReadSize( pMan->vVarsInt );
    pVars = Msat_IntVecReadArray( pMan->vVarsInt );
    for ( i = 0; i < nVars; i++ )
    {
        // process its connections
        vAdjs = (Msat_IntVec_t *)Msat_ClauseVecReadEntry( pMan->vAdjacents, pVars[i] );
        printf( "%d=%d { ", pVars[i], Msat_IntVecReadSize(vAdjs) );
        for ( k = 0; k < Msat_IntVecReadSize(vAdjs); k++ )
            printf( "%d ", Msat_IntVecReadEntry(vAdjs,k) );
        printf( "}\n" );

    }
    i = 0;
*/
}

/**Function*************************************************************

  Synopsis    [Traverses the cone, collects the numbers and adds the clauses.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
void Fraig_PrepareCones_rec( Fraig_Man_t * pMan, Fraig_Node_t * pNode )
{
    Fraig_Node_t * pFanin;
    Msat_IntVec_t * vAdjs;
    int fUseMuxes = 1, i;
    int fItIsTime;

    // skip if the node is aleady visited
    assert( !Fraig_IsComplement(pNode) );
    if ( pNode->TravId == pMan->nTravIds )
        return;
    pNode->TravId = pMan->nTravIds;

    // collect the node's number (closer to reverse topological order)
    Msat_IntVecPush( pMan->vVarsInt, pNode->Num );
    Msat_IntVecWriteEntry( pMan->vVarsUsed, pNode->Num, 1 );
    if ( !Fraig_NodeIsAnd( pNode ) )
        return;

    // if the node does not have fanins, create them
    fItIsTime = 0;
    if ( pNode->vFanins == NULL )
    {
        fItIsTime = 1;
        // create the fanins of the supergate
        assert( pNode->fClauses == 0 );
        if ( fUseMuxes && Fraig_NodeIsMuxType(pNode) )
        {
            pNode->vFanins = Fraig_NodeVecAlloc( 4 );
            Fraig_NodeVecPushUnique( pNode->vFanins, Fraig_Regular(Fraig_Regular(pNode->p1)->p1) );
            Fraig_NodeVecPushUnique( pNode->vFanins, Fraig_Regular(Fraig_Regular(pNode->p1)->p2) );
            Fraig_NodeVecPushUnique( pNode->vFanins, Fraig_Regular(Fraig_Regular(pNode->p2)->p1) );
            Fraig_NodeVecPushUnique( pNode->vFanins, Fraig_Regular(Fraig_Regular(pNode->p2)->p2) );
            Fraig_SupergateAddClausesMux( pMan, pNode );
        }
        else
        {
            pNode->vFanins = Fraig_CollectSupergate( pNode, fUseMuxes );
            Fraig_SupergateAddClauses( pMan, pNode, pNode->vFanins );
        }
        assert( pNode->vFanins->nSize > 1 );
        pNode->fClauses = 1;
        pMan->nVarsClauses++;

        // add fanins
        vAdjs = (Msat_IntVec_t *)Msat_ClauseVecReadEntry( pMan->vAdjacents, pNode->Num );
        assert( Msat_IntVecReadSize( vAdjs ) == 0 );
        for ( i = 0; i < pNode->vFanins->nSize; i++ )
        {
            pFanin = Fraig_Regular(pNode->vFanins->pArray[i]);
            Msat_IntVecPush( vAdjs, pFanin->Num );
        }
    }

    // recursively visit the fanins
    for ( i = 0; i < pNode->vFanins->nSize; i++ )
        Fraig_PrepareCones_rec( pMan, Fraig_Regular(pNode->vFanins->pArray[i]) );

    if ( fItIsTime )
    {
        // recursively visit the fanins
        for ( i = 0; i < pNode->vFanins->nSize; i++ )
        {
            pFanin = Fraig_Regular(pNode->vFanins->pArray[i]);
            vAdjs = (Msat_IntVec_t *)Msat_ClauseVecReadEntry( pMan->vAdjacents, pFanin->Num );
            Msat_IntVecPush( vAdjs, pNode->Num );
        }
    }
}

/**Function*************************************************************

  Synopsis    [Collect variables using their proximity from the nodes.]

  Description [This procedure creates a variable order based on collecting
  first the nodes that are the closest to the given two target nodes.]
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
void Fraig_OrderVariables( Fraig_Man_t * pMan, Fraig_Node_t * pOld, Fraig_Node_t * pNew )
{
    Fraig_Node_t * pNode, * pFanin;
    int i, k, Number, fUseMuxes = 1;
    int nVarsAlloc;

    assert( pOld != pNew );
    assert( !Fraig_IsComplement(pOld) );
    assert( !Fraig_IsComplement(pNew) );

    pMan->nTravIds++;

    // clean the variables
    nVarsAlloc = Msat_IntVecReadSize(pMan->vVarsUsed);
    Msat_IntVecFill( pMan->vVarsUsed, nVarsAlloc, 0 );
    Msat_IntVecClear( pMan->vVarsInt );

    // add the first node
    Msat_IntVecPush( pMan->vVarsInt, pOld->Num );
    Msat_IntVecWriteEntry( pMan->vVarsUsed, pOld->Num, 1 );
    pOld->TravId = pMan->nTravIds;

    // add the second node
    Msat_IntVecPush( pMan->vVarsInt, pNew->Num );
    Msat_IntVecWriteEntry( pMan->vVarsUsed, pNew->Num, 1 );
    pNew->TravId = pMan->nTravIds;

    // create the variable order
    for ( i = 0; i < Msat_IntVecReadSize(pMan->vVarsInt); i++ )
    {
        // get the new node on the frontier
        Number = Msat_IntVecReadEntry(pMan->vVarsInt, i);
        pNode = pMan->vNodes->pArray[Number];
        if ( !Fraig_NodeIsAnd(pNode) )
            continue;

        // if the node does not have fanins, create them
        if ( pNode->vFanins == NULL )
        {
            // create the fanins of the supergate
            assert( pNode->fClauses == 0 );
            // detecting a fanout-free cone (experiment only)
//            Fraig_DetectFanoutFreeCone( pMan, pNode );

            if ( fUseMuxes && Fraig_NodeIsMuxType(pNode) )
            {
                pNode->vFanins = Fraig_NodeVecAlloc( 4 );
                Fraig_NodeVecPushUnique( pNode->vFanins, Fraig_Regular(Fraig_Regular(pNode->p1)->p1) );
                Fraig_NodeVecPushUnique( pNode->vFanins, Fraig_Regular(Fraig_Regular(pNode->p1)->p2) );
                Fraig_NodeVecPushUnique( pNode->vFanins, Fraig_Regular(Fraig_Regular(pNode->p2)->p1) );
                Fraig_NodeVecPushUnique( pNode->vFanins, Fraig_Regular(Fraig_Regular(pNode->p2)->p2) );
                Fraig_SupergateAddClausesMux( pMan, pNode );
//                Fraig_DetectFanoutFreeConeMux( pMan, pNode );

                nMuxes++;
            }
            else
            {
                pNode->vFanins = Fraig_CollectSupergate( pNode, fUseMuxes );
                Fraig_SupergateAddClauses( pMan, pNode, pNode->vFanins );
            }
            assert( pNode->vFanins->nSize > 1 );
            pNode->fClauses = 1;
            pMan->nVarsClauses++;

            pNode->fMark2 = 1; // goes together with Fraig_SetupAdjacentMark()
        }

        // explore the implication fanins of pNode
        for ( k = 0; k < pNode->vFanins->nSize; k++ )
        {
            pFanin = Fraig_Regular(pNode->vFanins->pArray[k]);
            if ( pFanin->TravId == pMan->nTravIds ) // already collected
                continue;
            // collect and mark
            Msat_IntVecPush( pMan->vVarsInt, pFanin->Num );
            Msat_IntVecWriteEntry( pMan->vVarsUsed, pFanin->Num, 1 );
            pFanin->TravId = pMan->nTravIds;
        }
    }

    // set up the adjacent variable information
//    Fraig_SetupAdjacent( pMan, pMan->vVarsInt );
    Fraig_SetupAdjacentMark( pMan, pMan->vVarsInt );
}



/**Function*************************************************************

  Synopsis    [Set up the adjacent variable information.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
void Fraig_SetupAdjacent( Fraig_Man_t * pMan, Msat_IntVec_t * vConeVars )
{
    Fraig_Node_t * pNode, * pFanin;
    Msat_IntVec_t * vAdjs;
    int * pVars, nVars, i, k;

    // clean the adjacents for the variables
    nVars = Msat_IntVecReadSize( vConeVars );
    pVars = Msat_IntVecReadArray( vConeVars );
    for ( i = 0; i < nVars; i++ )
    {
        // process its connections
        vAdjs = (Msat_IntVec_t *)Msat_ClauseVecReadEntry( pMan->vAdjacents, pVars[i] );
        Msat_IntVecClear( vAdjs );

        pNode = pMan->vNodes->pArray[pVars[i]];
        if ( !Fraig_NodeIsAnd(pNode) )
            continue;

        // add fanins
        vAdjs = (Msat_IntVec_t *)Msat_ClauseVecReadEntry( pMan->vAdjacents, pVars[i] );
        for ( k = 0; k < pNode->vFanins->nSize; k++ )
//        for ( k = pNode->vFanins->nSize - 1; k >= 0; k-- )
        {
            pFanin = Fraig_Regular(pNode->vFanins->pArray[k]);
            Msat_IntVecPush( vAdjs, pFanin->Num );
//            Msat_IntVecPushUniqueOrder( vAdjs, pFanin->Num );
        }
    }
    // add the fanouts
    for ( i = 0; i < nVars; i++ )
    {
        pNode = pMan->vNodes->pArray[pVars[i]];
        if ( !Fraig_NodeIsAnd(pNode) )
            continue;

        // add the edges
        for ( k = 0; k < pNode->vFanins->nSize; k++ )
//        for ( k = pNode->vFanins->nSize - 1; k >= 0; k-- )
        {
            pFanin = Fraig_Regular(pNode->vFanins->pArray[k]);
            vAdjs = (Msat_IntVec_t *)Msat_ClauseVecReadEntry( pMan->vAdjacents, pFanin->Num );
            Msat_IntVecPush( vAdjs, pNode->Num );
//            Msat_IntVecPushUniqueOrder( vAdjs, pFanin->Num );
        }
    }
}


/**Function*************************************************************

  Synopsis    [Set up the adjacent variable information.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
void Fraig_SetupAdjacentMark( Fraig_Man_t * pMan, Msat_IntVec_t * vConeVars )
{
    Fraig_Node_t * pNode, * pFanin;
    Msat_IntVec_t * vAdjs;
    int * pVars, nVars, i, k;

    // clean the adjacents for the variables
    nVars = Msat_IntVecReadSize( vConeVars );
    pVars = Msat_IntVecReadArray( vConeVars );
    for ( i = 0; i < nVars; i++ )
    {
        pNode = pMan->vNodes->pArray[pVars[i]];
        if ( pNode->fMark2 == 0 )
            continue;
//        pNode->fMark2 = 0;

        // process its connections
//        vAdjs = (Msat_IntVec_t *)Msat_ClauseVecReadEntry( pMan->vAdjacents, pVars[i] );
//        Msat_IntVecClear( vAdjs );

        if ( !Fraig_NodeIsAnd(pNode) )
            continue;

        // add fanins
        vAdjs = (Msat_IntVec_t *)Msat_ClauseVecReadEntry( pMan->vAdjacents, pVars[i] );
        for ( k = 0; k < pNode->vFanins->nSize; k++ )
//        for ( k = pNode->vFanins->nSize - 1; k >= 0; k-- )
        {
            pFanin = Fraig_Regular(pNode->vFanins->pArray[k]);
            Msat_IntVecPush( vAdjs, pFanin->Num );
//            Msat_IntVecPushUniqueOrder( vAdjs, pFanin->Num );
        }
    }
    // add the fanouts
    for ( i = 0; i < nVars; i++ )
    {
        pNode = pMan->vNodes->pArray[pVars[i]];
        if ( pNode->fMark2 == 0 )
            continue;
        pNode->fMark2 = 0;

        if ( !Fraig_NodeIsAnd(pNode) )
            continue;

        // add the edges
        for ( k = 0; k < pNode->vFanins->nSize; k++ )
//        for ( k = pNode->vFanins->nSize - 1; k >= 0; k-- )
        {
            pFanin = Fraig_Regular(pNode->vFanins->pArray[k]);
            vAdjs = (Msat_IntVec_t *)Msat_ClauseVecReadEntry( pMan->vAdjacents, pFanin->Num );
            Msat_IntVecPush( vAdjs, pNode->Num );
//            Msat_IntVecPushUniqueOrder( vAdjs, pFanin->Num );
        }
    }
}




/**Function*************************************************************

  Synopsis    [Adds clauses to the solver.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
void Fraig_SupergateAddClauses( Fraig_Man_t * p, Fraig_Node_t * pNode, Fraig_NodeVec_t * vSuper )
{
    int fComp1, RetValue, nVars, Var, Var1, i;

    assert( Fraig_NodeIsAnd( pNode ) );
    nVars = Msat_SolverReadVarNum(p->pSat);

    Var = pNode->Num;
    assert( Var  < nVars ); 
    for ( i = 0; i < vSuper->nSize; i++ )
    {
        // get the predecessor nodes
        // get the complemented attributes of the nodes
        fComp1 = Fraig_IsComplement(vSuper->pArray[i]);
        // determine the variable numbers
        Var1 = Fraig_Regular(vSuper->pArray[i])->Num;
        // check that the variables are in the SAT manager
        assert( Var1 < nVars );

        // suppose the AND-gate is A * B = C
        // add !A => !C   or   A + !C
    //  fprintf( pFile, "%d %d 0%c", Var1, -Var, 10 );
        Msat_IntVecClear( p->vProj );
        Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(Var1, fComp1) );
        Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(Var,  1) );
        RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
        assert( RetValue );
    }

    // add A & B => C   or   !A + !B + C
//  fprintf( pFile, "%d %d %d 0%c", -Var1, -Var2, Var, 10 );
    Msat_IntVecClear( p->vProj );
    for ( i = 0; i < vSuper->nSize; i++ )
    {
        // get the predecessor nodes
        // get the complemented attributes of the nodes
        fComp1 = Fraig_IsComplement(vSuper->pArray[i]);
        // determine the variable numbers
        Var1 = Fraig_Regular(vSuper->pArray[i])->Num;

        // add this variable to the array
        Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(Var1, !fComp1) );
    }
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(Var, 0) );
    RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
    assert( RetValue );
}

/**Function*************************************************************

  Synopsis    [Adds clauses to the solver.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
void Fraig_SupergateAddClausesExor( Fraig_Man_t * p, Fraig_Node_t * pNode )
{
    Fraig_Node_t * pNode1, * pNode2;
    int fComp, RetValue;

    assert( !Fraig_IsComplement( pNode ) );
    assert( Fraig_NodeIsExorType( pNode ) );
    // get nodes
    pNode1 = Fraig_Regular(Fraig_Regular(pNode->p1)->p1);
    pNode2 = Fraig_Regular(Fraig_Regular(pNode->p1)->p2);
    // get the complemented attribute of the EXOR/NEXOR gate
    fComp = Fraig_NodeIsExor( pNode ); // 1 if EXOR, 0 if NEXOR

    // create four clauses
    Msat_IntVecClear( p->vProj );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode->Num,   fComp) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode1->Num,  fComp) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode2->Num,  fComp) );
    RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
    assert( RetValue );
    Msat_IntVecClear( p->vProj );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode->Num,   fComp) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode1->Num, !fComp) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode2->Num, !fComp) );
    RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
    assert( RetValue );
    Msat_IntVecClear( p->vProj );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode->Num,  !fComp) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode1->Num,  fComp) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode2->Num, !fComp) );
    RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
    assert( RetValue );
    Msat_IntVecClear( p->vProj );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode->Num,  !fComp) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode1->Num, !fComp) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(pNode2->Num,  fComp) );
    RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
    assert( RetValue );
}

/**Function*************************************************************

  Synopsis    [Adds clauses to the solver.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
void Fraig_SupergateAddClausesMux( Fraig_Man_t * p, Fraig_Node_t * pNode )
{
    Fraig_Node_t * pNodeI, * pNodeT, * pNodeE;
    int RetValue, VarF, VarI, VarT, VarE, fCompT, fCompE;

    assert( !Fraig_IsComplement( pNode ) );
    assert( Fraig_NodeIsMuxType( pNode ) );
    // get nodes (I = if, T = then, E = else)
    pNodeI = Fraig_NodeRecognizeMux( pNode, &pNodeT, &pNodeE );
    // get the variable numbers
    VarF = pNode->Num;
    VarI = pNodeI->Num;
    VarT = Fraig_Regular(pNodeT)->Num;
    VarE = Fraig_Regular(pNodeE)->Num;
    // get the complementation flags
    fCompT = Fraig_IsComplement(pNodeT);
    fCompE = Fraig_IsComplement(pNodeE);

    // f = ITE(i, t, e)

    // i' + t' + f
    // i' + t  + f'
    // i  + e' + f
    // i  + e  + f'

    // create four clauses
    Msat_IntVecClear( p->vProj );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarI,  1) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarT,  1^fCompT) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarF,  0) );
    RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
    assert( RetValue );
    Msat_IntVecClear( p->vProj );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarI,  1) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarT,  0^fCompT) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarF,  1) );
    RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
    assert( RetValue );
    Msat_IntVecClear( p->vProj );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarI,  0) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarE,  1^fCompE) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarF,  0) );
    RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
    assert( RetValue );
    Msat_IntVecClear( p->vProj );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarI,  0) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarE,  0^fCompE) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarF,  1) );
    RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
    assert( RetValue );

    // two additional clauses
    // t' & e' -> f'
    // t  & e  -> f 

    // t  + e   + f'
    // t' + e'  + f 

    if ( VarT == VarE )
    {
//        assert( fCompT == !fCompE );
        return;
    }

    Msat_IntVecClear( p->vProj );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarT,  0^fCompT) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarE,  0^fCompE) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarF,  1) );
    RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
    assert( RetValue );
    Msat_IntVecClear( p->vProj );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarT,  1^fCompT) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarE,  1^fCompE) );
    Msat_IntVecPush( p->vProj, MSAT_VAR2LIT(VarF,  0) );
    RetValue = Msat_SolverAddClause( p->pSat, p->vProj );
    assert( RetValue );

}





/**Function*************************************************************

  Synopsis    [Returns the array of nodes to be combined into one multi-input AND-gate.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
void Fraig_DetectFanoutFreeCone_rec( Fraig_Node_t * pNode, Fraig_NodeVec_t * vSuper, Fraig_NodeVec_t * vInside, int fFirst )
{
    // make the pointer regular
    pNode = Fraig_Regular(pNode);
    // if the new node is complemented or a PI, another gate begins
    if ( (!fFirst && pNode->nRefs > 1) || Fraig_NodeIsVar(pNode) )
    {
        Fraig_NodeVecPushUnique( vSuper, pNode );
        return;
    }
    // go through the branches
    Fraig_DetectFanoutFreeCone_rec( pNode->p1, vSuper, vInside, 0 );
    Fraig_DetectFanoutFreeCone_rec( pNode->p2, vSuper, vInside, 0 );
    // add the node
    Fraig_NodeVecPushUnique( vInside, pNode );
}

/**Function*************************************************************

  Synopsis    [Returns the array of nodes to be combined into one multi-input AND-gate.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
/*
void Fraig_DetectFanoutFreeCone( Fraig_Man_t * pMan, Fraig_Node_t * pNode )
{
    Fraig_NodeVec_t * vFanins;
    Fraig_NodeVec_t * vInside;
    int nCubes;
    extern int Fraig_CutSopCountCubes( Fraig_Man_t * pMan, Fraig_NodeVec_t * vFanins, Fraig_NodeVec_t * vInside );

    vFanins = Fraig_NodeVecAlloc( 8 );
    vInside = Fraig_NodeVecAlloc( 8 );

    Fraig_DetectFanoutFreeCone_rec( pNode, vFanins, vInside, 1 );
    assert( vInside->pArray[vInside->nSize-1] == pNode );

    nCubes = Fraig_CutSopCountCubes( pMan, vFanins, vInside );

printf( "%d(%d)", vFanins->nSize, nCubes );
    Fraig_NodeVecFree( vFanins );
    Fraig_NodeVecFree( vInside );
}
*/



/**Function*************************************************************

  Synopsis    [Returns the array of nodes to be combined into one multi-input AND-gate.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
void Fraig_DetectFanoutFreeConeMux_rec( Fraig_Node_t * pNode, Fraig_NodeVec_t * vSuper, Fraig_NodeVec_t * vInside, int fFirst )
{
    // make the pointer regular
    pNode = Fraig_Regular(pNode);
    // if the new node is complemented or a PI, another gate begins
    if ( (!fFirst && pNode->nRefs > 1) || Fraig_NodeIsVar(pNode) || !Fraig_NodeIsMuxType(pNode) )
    {
        Fraig_NodeVecPushUnique( vSuper, pNode );
        return;
    }
    // go through the branches
    Fraig_DetectFanoutFreeConeMux_rec( Fraig_Regular(pNode->p1)->p1, vSuper, vInside, 0 );
    Fraig_DetectFanoutFreeConeMux_rec( Fraig_Regular(pNode->p1)->p2, vSuper, vInside, 0 );
    Fraig_DetectFanoutFreeConeMux_rec( Fraig_Regular(pNode->p2)->p1, vSuper, vInside, 0 );
    Fraig_DetectFanoutFreeConeMux_rec( Fraig_Regular(pNode->p2)->p2, vSuper, vInside, 0 );
    // add the node
    Fraig_NodeVecPushUnique( vInside, pNode );
}

/**Function*************************************************************

  Synopsis    [Returns the array of nodes to be combined into one multi-input AND-gate.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
void Fraig_DetectFanoutFreeConeMux( Fraig_Man_t * pMan, Fraig_Node_t * pNode )
{
    Fraig_NodeVec_t * vFanins;
    Fraig_NodeVec_t * vInside;
    int nCubes;
    extern int Fraig_CutSopCountCubes( Fraig_Man_t * pMan, Fraig_NodeVec_t * vFanins, Fraig_NodeVec_t * vInside );

    vFanins = Fraig_NodeVecAlloc( 8 );
    vInside = Fraig_NodeVecAlloc( 8 );

    Fraig_DetectFanoutFreeConeMux_rec( pNode, vFanins, vInside, 1 );
    assert( vInside->pArray[vInside->nSize-1] == pNode );

//    nCubes = Fraig_CutSopCountCubes( pMan, vFanins, vInside );
    nCubes = 0;

printf( "%d(%d)", vFanins->nSize, nCubes );
    Fraig_NodeVecFree( vFanins );
    Fraig_NodeVecFree( vInside );
}



/**Function*************************************************************

  Synopsis    [Collect variables using their proximity from the nodes.]

  Description [This procedure creates a variable order based on collecting
  first the nodes that are the closest to the given two target nodes.]
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
void Fraig_SetActivity( Fraig_Man_t * pMan, Fraig_Node_t * pOld, Fraig_Node_t * pNew )
{
    Fraig_Node_t * pNode;
    int i, Number, MaxLevel;
    float * pFactors = Msat_SolverReadFactors(pMan->pSat);
    if ( pFactors == NULL )
        return;
    MaxLevel = Abc_MaxInt( pOld->Level, pNew->Level );
    // create the variable order
    for ( i = 0; i < Msat_IntVecReadSize(pMan->vVarsInt); i++ )
    {
        // get the new node on the frontier
        Number = Msat_IntVecReadEntry(pMan->vVarsInt, i);
        pNode = pMan->vNodes->pArray[Number];
        pFactors[pNode->Num] = (float)pow( 0.97, MaxLevel - pNode->Level );
//        if ( pNode->Num % 50 == 0 )
//        printf( "(%d) %.2f  ", MaxLevel - pNode->Level, pFactors[pNode->Num] );
    }
//    printf( "\n" );
}

////////////////////////////////////////////////////////////////////////
///                       END OF FILE                                ///
////////////////////////////////////////////////////////////////////////


ABC_NAMESPACE_IMPL_END